dragouf

{"swagger":"2.0","info":{"version":"v1","title":"Vulog Carsharing FO API"},"basePath":"/api-fo/final","paths":{"/v1/availableVehicles":{"get":{"tags":["AvailableVehicles"],"summary":"All available vehicles.","description":"Get the list of all available vehicles, it can be a lot of data.","operationId":"V{versionAvailableVehiclesGet","consumes":[],"produces":["text/plain","application/json","text/json"],"parameters":[],"responses":{"200":{"description":"An array of available vehicles","schema":{"type":"array","items":{"$ref":"#/definitions/AvailableVehicle"}}},"204":{"description":"No available vehicle found"}}}},"/v1/device/notification":{"post":{"tags":["Device"],"summary":"Susbcribe a phone device for push notifications","operationId":"V{versionDeviceNotificationPost","consumes":["application/json","text/json","application/json-patch+json"],"produces":["text/plain","application/json","text/json"],"parameters":[{"name":"subscription","in":"body","description":"the subscription details","required":false,"sche

felixstorm

# Be warned: This is just a first try and still very much work in progress - no guarantees given whatsoever!
#
# To install the ESPHome firmware on the WiCAN for the first time (before being able to use ESPHome OTA), I built the firmware
# for download (in "modern" format) and then used the following command line on Linux:
# esptool.py --before=default_reset --after=hard_reset --no-stub write_flash --flash_mode dio --flash_freq 80m --flash_size 4MB 0x0 /home/.../Downloads/m-wican-factory.bin
#
# Don't forget to short the pins to enable boot mode (https://github.com/meatpiHQ/wican-fw#obd).
#
# Using the graphical tool (https://github.com/meatpiHQ/wican-fw#2-usb-flash) will probably work just as well. Just populate
# the first item in the list with 0x0 and /home/.../Downloads/m-wican-factory.bin and leave the rest empty.

mukowman

substitutions:
  device_name: wican

esp32:
  variant: ESP32C3
  board: esp32-c3-devkitm-1

esphome:
  name: ${device_name}

jacobw

esphome:
  name: dev4
  friendly_name: BTHome dev4

interval:
  - interval: 5s
    startup_delay: 1s
    then:
      - lambda: |-
          // Update sensor then wait