gistfile1.txt

johannes@jd:~ % sudo sysctl kern.msgbuf_clear=1
kern.msgbuf_clear: 0 -> 0
johannes@jd:~ % sudo kldunload i915kms
johannes@jd:~ % dmesg
[drm:drm_fb_helper_hotplug_event] 
[drm:drm_setup_crtcs] 
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:eDP-1]
[drm:intel_dp_detect] [CONNECTOR:85:eDP-1]
[drm:intel_power_well_enable] enabling DC off
[drm:gen9_set_dc_state] Setting DC state from 02 to 00
[drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates] sink rates: 162000, 270000
[drm:intel_dp_print_rates] common rates: 162000, 270000
[drm:edp_panel_vdd_on] Turning eDP port A VDD on
[drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
[drm:%s: 0x%05x AUX %s (ret=%3d) %*ph
] DPDDC-A[drm:drm_dp_read_desc] DP sink: OUI fffff800a32611b4hD dev-ID 0xfffff800a32611b7E HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:intel_dp_configure_mst] MST support? port A: no, sink: no, modparam: yes
[drm:%s: 0x%05x AUX %s (ret=%3d) %*ph
] DPDDC-A[drm:drm_add_display_info] non_desktop set to 0
[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
[drm:drm_mode_object_put] OBJ ID: 112 (1)
[drm:drm_edid_to_eld] ELD: no CEA Extension found
[drm:drm_add_display_info] non_desktop set to 0
[drm:drm_add_display_info] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:85:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline] Modeline 86:"1366x768" 60 70120 1366 1414 1446 1485 768 772 776 787 0x48 0x9
[drm:drm_mode_debug_printmodeline] Modeline 87:"1366x768" 47 60200 1366 1466 1566 1567 768 788 808 809 0x40 0x9
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:94:HDMI-A-1]
[drm:intel_hdmi_detect] [CONNECTOR:94:HDMI-A-1]
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: 0xfffffe00941d9580E (err -6)
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:94:HDMI-A-1] disconnected
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-1]
[drm:intel_dp_detect] [CONNECTOR:101:DP-1]
[drm:intel_power_well_enable] enabling power well 2
[drm:intel_power_well_disable] disabling power well 2
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-1] disconnected
hdacc1: [drm:drm_helper_probe_single_connector_modes] Unexpected unsolicited response with tag 63: ffffffff
[CONNECTOR:107:HDMI-A-2]
hdacc1: [drm:intel_hdmi_detect] Unexpected unsolicited response with tag 63: ffffffff
[CONNECTOR:107:HDMI-A-2]
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
[drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
[drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
[drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: 0xfffffe00941d9580E (err -6)
[drm:drm_helper_probe_single_connector_modes] [CONNECTOR:107:HDMI-A-2] disconnected
[drm:drm_enable_connectors] connector 85 enabled? yes
[drm:drm_enable_connectors] connector 94 enabled? no
[drm:drm_enable_connectors] connector 101 enabled? no
[drm:drm_enable_connectors] connector 107 enabled? no
[drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
[drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
[drm:intel_fb_initial_config] connector eDP-1 on [CRTC:47:pipe A]: 1366x768
[drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
[drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
[drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
[drm:drm_mode_object_put] OBJ ID: 85 (4)
[drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 47 (0,0)
[drm:drm_mode_object_get] OBJ ID: 85 (3)
[drm:drm_atomic_state_init] Allocated atomic state 0xfffff8000284e000
[drm:drm_mode_object_get] OBJ ID: 111 (2)
[drm:drm_atomic_get_plane_state] Added [PLANE:30:plane 1A] 0xfffff8001524ea00 state to 0xfffff8000284e000
[drm:drm_mode_object_get] OBJ ID: 113 (1)
[drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe A] 0xfffff800a3333800 state to 0xfffff8000284e000
[drm:drm_atomic_get_plane_state] Added [PLANE:37:plane 2A] 0xfffff8001524e800 state to 0xfffff8000284e000
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for [PLANE:37:plane 2A] state 0xfffff8001524e800
[drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor A] 0xfffff8001524e600 state to 0xfffff8000284e000
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for [PLANE:44:cursor A] state 0xfffff8001524e600
[drm:drm_atomic_get_plane_state] Added [PLANE:48:plane 1B] 0xfffff8001524e400 state to 0xfffff8000284e000
[drm:drm_atomic_get_plane_state] Added [PLANE:55:plane 2B] 0xfffff8001524e200 state to 0xfffff8000284e000
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for [PLANE:55:plane 2B] state 0xfffff8001524e200
[drm:drm_atomic_get_plane_state] Added [PLANE:62:cursor B] 0xfffff8001524e000 state to 0xfffff8000284e000
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for [PLANE:62:cursor B] state 0xfffff8001524e000
[drm:drm_atomic_get_plane_state] Added [PLANE:66:plane 1C] 0xfffff8001524dc00 state to 0xfffff8000284e000
[drm:drm_atomic_get_plane_state] Added [PLANE:73:plane 2C] 0xfffff8001524da00 state to 0xfffff8000284e000
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for [PLANE:73:plane 2C] state 0xfffff8001524da00
[drm:drm_atomic_get_plane_state] Added [PLANE:80:cursor C] 0xfffff8001524d800 state to 0xfffff8000284e000
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for [PLANE:80:cursor C] state 0xfffff8001524d800
[drm:drm_mode_object_put] OBJ ID: 113 (2)
[drm:drm_atomic_set_mode_for_crtc] Set [MODE:1366x768] for [CRTC:47:pipe A] state 0xfffff800a3333800
[drm:drm_atomic_set_fb_for_plane] Set [FB:111] for [PLANE:30:plane 1A] state 0xfffff8001524ea00
[drm:drm_mode_object_get] OBJ ID: 111 (3)
[drm:drm_mode_object_put] OBJ ID: 111 (4)
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe A] to 0xfffff8000284e000
[drm:drm_mode_object_get] OBJ ID: 85 (5)
[drm:drm_mode_object_get] OBJ ID: 85 (6)
[drm:drm_atomic_get_connector_state] Added [CONNECTOR:85:eDP-1] 0xfffff8000266a500 state to 0xfffff8000284e000
[drm:drm_mode_object_put] OBJ ID: 85 (6)
[drm:drm_atomic_set_crtc_for_connector] Link [CONNECTOR:85:eDP-1] state 0xfffff8000266a500 to [NOCRTC]
[drm:drm_mode_object_get] OBJ ID: 85 (5)
[drm:drm_atomic_set_crtc_for_connector] Link [CONNECTOR:85:eDP-1] state 0xfffff8000266a500 to [CRTC:47:pipe A]
[drm:drm_atomic_get_crtc_state] Added [CRTC:65:pipe B] 0xfffff800a3333000 state to 0xfffff8000284e000
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for [CRTC:65:pipe B] state 0xfffff800a3333000
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for [PLANE:48:plane 1B] state 0xfffff8001524e400
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:65:pipe B] to 0xfffff8000284e000
[drm:drm_atomic_get_crtc_state] Added [CRTC:83:pipe C] 0xfffff800a3332800 state to 0xfffff8000284e000
[drm:drm_atomic_set_mode_for_crtc] Set [NOMODE] for [CRTC:83:pipe C] state 0xfffff800a3332800
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for [PLANE:66:plane 1C] state 0xfffff8001524dc00
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:83:pipe C] to 0xfffff8000284e000
[drm:drm_atomic_check_only] checking 0xfffff8000284e000
[drm:update_connector_routing] Updating routing for [CONNECTOR:85:eDP-1]
[drm:update_connector_routing] [CONNECTOR:85:eDP-1] keeps [ENCODER:84:DDI A], now on [CRTC:47:pipe A]
[drm:intel_plane_atomic_calc_changes] [CRTC:47:pipe A] has [PLANE:30:plane 1A] with fb 111
[drm:intel_plane_atomic_calc_changes] [PLANE:30:plane 1A] visible 1 -> 1, off 0, on 0, ms 0
[drm:drm_atomic_commit] committing 0xfffff8000284e000
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,508)@ 62.350918 -> 62.340160 [e 0 us, 0 rep]
[drm:drm_vblank_restore] missed 532 vblanks in 8866178221 ns, frame duration=16667070 ns, hw_diff=532
[drm:drm_vblank_enable] enabling vblank on crtc 0, ret: 0
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,515)@ 62.350918 -> 62.340011 [e 0 us, 0 rep]
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=538, diff=0, hw=4910 hw_last=4910
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,521)@ 62.351937 -> 62.340903 [e 0 us, 0 rep]
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=538, diff=0, hw=4910 hw_last=4910
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-13)@ 62.357294 -> 62.357569 [e 0 us, 0 rep]
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=538, diff=1, hw=4911 hw_last=4910
[drm:drm_handle_vblank_events] vblank event on 539, current 539
[drm:drm_atomic_state_default_clear] Clearing atomic state 0xfffff8000284e000
[drm:drm_mode_object_put] OBJ ID: 85 (6)
[drm:drm_mode_object_put] OBJ ID: 85 (5)
[drm:drm_mode_object_put] OBJ ID: 113 (1)
[drm:drm_mode_object_put] OBJ ID: 111 (3)
[drm:__drm_atomic_state_free] Freeing atomic state 0xfffff8000284e000
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-13)@ 62.373974 -> 62.374249 [e 0 us, 0 rep]
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=539, diff=1, hw=4912 hw_last=4911
[drm:vblank_disable_fn] disabling vblank on crtc 0
[drm:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v p(0,-6)@ 62.373974 -> 62.374101 [e 0 us, 0 rep]
[drm:drm_update_vblank_count] updating vblank count on crtc 0: current=540, diff=0, hw=4912 hw_last=4912
[drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
[drm:intel_power_well_disable] disabling DC off
[drm:skl_enable_dc6] Enabling DC6
[drm:gen9_set_dc_state] Setting DC state from 00 to 02
[drm:intel_power_well_enable] enabling DC off
[drm:gen9_set_dc_state] Setting DC state from 02 to 00
[drm:intel_power_well_enable] enabling power well 2
[drm:intel_power_well_enable] enabling DDI B IO power well
[drm:intel_power_well_enable] enabling DDI C IO power well
[drm:intel_power_well_enable] enabling DDI D IO power well
intel_fbdev_unregister
current_is_async not implemented -- see your local kernel hacker
linux_unregister_framebuffer
__unregister_framebuffer
hdacc1: __unregister_framebuffer fbio
Unexpected unsolicited response with tag 63: ffffffff
__unregister_framebuffer detach fb
VT: Switching back from "fb" to "efifb".
vt_replace_backend: (null)
vt_replace_backend: main vd = fb
vt_replace_backend downgrade
vt_replace_backend downgrade, call old fini = fb
vt_fb_fini: fb
vt_efifb_init
vt_fb_init: efifb
hdacc1: Unexpected unsolicited response with tag 63: ffffffff
vt_fb_postswitch
vt_replace_backend async
unlink_framebuffer
__unregister_framebuffer done
unregister_acpi_notifier not implemented -- see your local kernel hacker
[drm:drm_sysfs_connector_remove] removing "eDP-1" from sysfs
[drm:drm_sysfs_connector_remove] removing "HDMI-A-1" from sysfs
[drm:drm_sysfs_connector_remove] removing "DP-1" from sysfs
[drm:drm_sysfs_connector_remove] removing "HDMI-A-2" from sysfs
unregister_oom_notifier not implemented -- see your local kernel hacker
[drm:drm_atomic_state_init] Allocated atomic state 0xfffff80002850800
[drm:drm_mode_object_get] OBJ ID: 112 (1)
[drm:drm_atomic_get_crtc_state] Added [CRTC:47:pipe A] 0xfffff800a325b000 state to 0xfffff80002850800
[drm:drm_mode_object_put] OBJ ID: 112 (2)
[drm:drm_atomic_set_mode_prop_for_crtc] Set [NOMODE] for [CRTC:47:pipe A] state 0xfffff800a325b000
[drm:drm_atomic_add_affected_planes] Adding all current planes for [CRTC:47:pipe A] to 0xfffff80002850800
[drm:drm_mode_object_get] OBJ ID: 111 (2)
[drm:drm_atomic_get_plane_state] Added [PLANE:30:plane 1A] 0xfffff80004fcc800 state to 0xfffff80002850800
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe A] to 0xfffff80002850800
[drm:drm_mode_object_get] OBJ ID: 85 (5)
[drm:drm_mode_object_get] OBJ ID: 85 (6)
[drm:drm_atomic_get_connector_state] Added [CONNECTOR:85:eDP-1] 0xfffff8000266cd00 state to 0xfffff80002850800
[drm:drm_atomic_get_crtc_state] Added [CRTC:65:pipe B] 0xfffff800a325c800 state to 0xfffff80002850800
[drm:drm_atomic_add_affected_planes] Adding all current planes for [CRTC:65:pipe B] to 0xfffff80002850800
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:65:pipe B] to 0xfffff80002850800
[drm:drm_atomic_get_crtc_state] Added [CRTC:83:pipe C] 0xfffff800a3251000 state to 0xfffff80002850800
[drm:drm_atomic_add_affected_planes] Adding all current planes for [CRTC:83:pipe C] to 0xfffff80002850800
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:83:pipe C] to 0xfffff80002850800
[drm:drm_mode_object_put] OBJ ID: 85 (6)
[drm:drm_atomic_set_crtc_for_connector] Link [CONNECTOR:85:eDP-1] state 0xfffff8000266cd00 to [NOCRTC]
[drm:drm_atomic_set_crtc_for_plane] Link [PLANE:30:plane 1A] state 0xfffff80004fcc800 to [NOCRTC]
[drm:drm_atomic_set_fb_for_plane] Set [NOFB] for [PLANE:30:plane 1A] state 0xfffff80004fcc800
[drm:drm_mode_object_put] OBJ ID: 111 (3)
[drm:drm_atomic_check_only] checking 0xfffff80002850800
[drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe A] mode changed
[drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe A] enable changed
[drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe A] active changed
[drm:update_connector_routing] Updating routing for [CONNECTOR:85:eDP-1]
[drm:update_connector_routing] Disabling [CONNECTOR:85:eDP-1]
[drm:drm_atomic_helper_check_modeset] [CRTC:47:pipe A] needs all connectors, enable: n, active: n
[drm:drm_atomic_add_affected_connectors] Adding all current connectors for [CRTC:47:pipe A] to 0xfffff80002850800
[drm:drm_atomic_add_affected_planes] Adding all current planes for [CRTC:47:pipe A] to 0xfffff80002850800
[drm:intel_modeset_checks] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[drm:intel_modeset_checks] New voltage level calculated to be logical 0, actual 0
[drm:intel_plane_atomic_calc_changes] [CRTC:47:pipe A] has [PLANE:30:plane 1A] with fb -1
[drm:intel_plane_atomic_calc_changes] [PLANE:30:plane 1A] visible 1 -> 0, off 1, on 0, ms 1
[drm:drm_atomic_get_plane_state] Added [PLANE:44:cursor A] 0xfffff8001559a800 state to 0xfffff80002850800
[drm:drm_atomic_get_plane_state] Added [PLANE:37:plane 2A] 0xfffff8001559aa00 state to 0xfffff80002850800
[drm:skl_print_wm_changes] [PLANE:30:plane 1A] ddb (0 - 860) -> (0 - 0)
[drm:skl_print_wm_changes] [PLANE:44:cursor A] ddb (860 - 892) -> (0 - 0)
[drm:drm_atomic_commit] committing 0xfffff80002850800
[drm:intel_edp_backlight_off] 
[drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:drm_crtc_vblank_off] crtc 0, vblank enabled 0, inmodeset 0
[drm:intel_disable_pipe] disabling pipe A
[drm:edp_panel_vdd_on] Turning eDP port A VDD on
[drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b
[drm:%s: 0x%05x AUX %s (ret=%3d) %*ph
] DPDDC-A[drm:edp_panel_off] Turn eDP port A panel power off
[drm:wait_panel_off] Wait for panel power off time
[drm:wait_panel_status] mask b0000000 value 00000000 status a0000003 control 00000000
[drm:wait_panel_status] Wait complete
[drm:__intel_fbc_disable] Disabling FBC on pipe A
[drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 47
[drm:intel_disable_shared_dpll] disabling DPLL 0
[drm:verify_encoder_state] [ENCODER:84:DDI A]
[drm:verify_encoder_state] [ENCODER:93:DDI B]
[drm:verify_encoder_state] [ENCODER:100:DDI C]
[drm:verify_encoder_state] [ENCODER:102:DP-MST A]
[drm:verify_encoder_state] [ENCODER:103:DP-MST B]
[drm:verify_encoder_state] [ENCODER:104:DP-MST C]
[drm:intel_connector_verify_state] [CONNECTOR:85:eDP-1]
[drm:verify_single_dpll_state] DPLL 0
[drm:verify_single_dpll_state] DPLL 1
[drm:verify_single_dpll_state] DPLL 2
[drm:verify_single_dpll_state] DPLL 3
[drm:drm_mode_object_put] OBJ ID: 112 (1)
[drm:verify_crtc_state] [CRTC:47:pipe A]
[drm:drm_irq_uninstall] irq=65535
[drm:drm_atomic_state_default_clear] Clearing atomic state 0xfffff80002850800
[drm:drm_mode_object_put] OBJ ID: 85 (5)
[drm:drm_mode_object_put] OBJ ID: 85 (4)
[drm:drm_mode_object_put] OBJ ID: 111 (2)
[drm:__drm_atomic_state_free] Freeing atomic state 0xfffff80002850800
[drm:drm_mode_object_put] OBJ ID: 85 (3)
[drm:drm_mode_object_put] OBJ ID: 94 (2)
[drm:drm_mode_object_put] OBJ ID: 101 (2)
[drm:drm_mode_object_put] OBJ ID: 107 (2)
[drm:drm_mode_object_put] OBJ ID: 85 (2)
[drm:drm_mode_object_put] OBJ ID: 111 (1)
[drm:drm_mode_object_put] OBJ ID: 85 (2)
[drm:drm_mode_object_put] OBJ ID: 94 (2)
[drm:drm_mode_object_put] OBJ ID: 101 (2)
[drm:drm_mode_object_put] OBJ ID: 107 (2)
[drm:drm_mode_object_put] OBJ ID: 31 (1)
[drm:drm_mode_object_put] OBJ ID: 38 (1)
[drm:drm_mode_object_put] OBJ ID: 45 (1)
[drm:drm_mode_object_put] OBJ ID: 49 (1)
[drm:drm_mode_object_put] OBJ ID: 56 (1)
[drm:drm_mode_object_put] OBJ ID: 63 (1)
[drm:drm_mode_object_put] OBJ ID: 67 (1)
[drm:drm_mode_object_put] OBJ ID: 74 (1)
[drm:drm_mode_object_put] OBJ ID: 81 (1)
[drm:drm_mode_object_put] OBJ ID: 110 (1)
check_move_unevictable_pages not implemented -- see your local kernel hacker
drmn0: detached
Warning: memory type drm_driver leaked memory on destroy (2 allocations, 32 bytes leaked).
Warning: memory type idr leaked memory on destroy (3 allocations, 1536 bytes leaked).
Warning: memory type linuxcurrent leaked memory on destroy (9 allocations, 1088 bytes leaked).
Warning: memory type linux leaked memory on destroy (1 allocations, 16 bytes leaked).
johannes@jd:~ %