Created
December 10, 2008 04:06
-
-
Save johanlunds/34220 to your computer and use it in GitHub Desktop.
Swedish translation for http://github.com/svenfuchs/rails-i18n
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
# Swedish translation, by Johan Lundström ([email protected]), with parts taken | |
# from http://github.com/daniel/swe_rails | |
"sv-SE": | |
number: | |
# Used in number_with_delimiter() | |
# These are also the defaults for 'currency', 'percentage', 'precision', and 'human' | |
format: | |
# Sets the separator between the units, for more precision (e.g. 1.0 / 2.0 == 0.5) | |
separator: "," | |
# Delimets thousands (e.g. 1,000,000 is a million) (always in groups of three) | |
delimiter: "." | |
# Number of decimals, behind the separator (the number 1 with a precision of 2 gives: 1.00) | |
precision: 2 | |
# Used in number_to_currency() | |
currency: | |
format: | |
# Where is the currency sign? %u is the currency unit, %n the number (default: $5.00) | |
format: "%n %u" | |
unit: "kr" | |
# These three are to override number.format and are optional | |
# separator: "." | |
# delimiter: "," | |
# precision: 2 | |
# Used in number_to_percentage() | |
percentage: | |
format: | |
# These three are to override number.format and are optional | |
# separator: | |
delimiter: "" | |
# precision: | |
# Used in number_to_precision() | |
precision: | |
format: | |
# These three are to override number.format and are optional | |
# separator: | |
delimiter: "" | |
# precision: | |
# Used in number_to_human_size() | |
human: | |
format: | |
# These three are to override number.format and are optional | |
# separator: | |
delimiter: "" | |
# precision: 1 | |
storage_units: [Byte, KB, MB, GB, TB] | |
# Used in distance_of_time_in_words(), distance_of_time_in_words_to_now(), time_ago_in_words() | |
datetime: | |
distance_in_words: | |
half_a_minute: "en halv minut" | |
less_than_x_seconds: | |
one: "mindre än en sekund" | |
other: "mindre än {{count}} sekunder" | |
x_seconds: | |
one: "en sekund" | |
other: "{{count}} sekunder" | |
less_than_x_minutes: | |
one: "mindre än en minut" | |
other: "mindre än {{count}} minuter" | |
x_minutes: | |
one: "en minut" | |
other: "{{count}} minuter" | |
about_x_hours: | |
one: "ungefär en timme" | |
other: "ungefär {{count}} timmar" | |
x_days: | |
one: "en dag" | |
other: "{{count}} dagar" | |
about_x_months: | |
one: "ungefär en månad" | |
other: "ungefär {{count}} månader" | |
x_months: | |
one: "en månad" | |
other: "{{count}} månader" | |
about_x_years: | |
one: "ungefär ett år" | |
other: "ungefär {{count}} år" | |
over_x_years: | |
one: "mer än ett år" | |
other: "mer än {{count}} år" | |
activerecord: | |
errors: | |
template: | |
header: | |
one: "Ett fel förhindrade denna {{model}} från att sparas" | |
other: "{{count}} fel förhindrade denna {{model}} från att sparas" | |
# The variable :count is also available | |
body: "Det var problem med följande fält:" | |
# The values :model, :attribute and :value are always available for interpolation | |
# The value :count is available when applicable. Can be used for pluralization. | |
messages: | |
inclusion: "finns inte i listan" | |
exclusion: "är reserverat" | |
invalid: "är ogiltigt" | |
confirmation: "stämmer inte övererens" | |
accepted : "måste vara accepterad" | |
empty: "får ej vara tom" | |
blank: "måste anges" | |
too_long: "är för lång (maximum är {{count}} tecken)" | |
too_short: "är för kort (minimum är {{count}} tecken)" | |
wrong_length: "har fel längd (ska vara {{count}} tecken)" | |
taken: "har redan tagits" | |
not_a_number: "är inte ett nummer" | |
greater_than: "måste vara större än {{count}}" | |
greater_than_or_equal_to: "måste vara större än eller lika med {{count}}" | |
equal_to: "måste vara samma som" | |
less_than: "måste vara mindre än {{count}}" | |
less_than_or_equal_to: "måste vara mindre än eller lika med {{count}}" | |
odd: "måste vara udda" | |
even: "måste vara jämnt" | |
# Append your own errors here or at the model/attributes scope. | |
# You can define own errors for models or model attributes. | |
# The values :model, :attribute and :value are always available for interpolation. | |
# | |
# For example, | |
# models: | |
# user: | |
# blank: "This is a custom blank message for {{model}}: {{attribute}}" | |
# attributes: | |
# login: | |
# blank: "This is a custom blank message for User login" | |
# Will define custom blank validation message for User model and | |
# custom blank validation message for login attribute of User model. | |
# models: | |
# Translate model names. Used in Model.human_name(). | |
#models: | |
# For example, | |
# user: "Dude" | |
# will translate User model name to "Dude" | |
# Translate model attribute names. Used in Model.human_attribute_name(attribute). | |
#attributes: | |
# For example, | |
# user: | |
# login: "Handle" | |
# will translate User attribute "login" as "Handle" | |
date: | |
formats: | |
# Use the strftime parameters for formats. | |
# When no format has been given, it uses default. | |
# You can provide other formats here if you like! | |
default: "%Y-%m-%d" | |
short: "%e %b" | |
long: "%e %B, %Y" | |
day_names: [söndag, måndag, tisdag, onsdag, torsdag, fredag, lördag] | |
abbr_day_names: [sön, mån, tis, ons, tor, fre, lör] | |
# Don't forget the nil at the beginning; there's no such thing as a 0th month | |
month_names: [~, januari, februari, mars, april, maj, juni, juli, augusti, september, oktober, november, december] | |
abbr_month_names: [~, jan, feb, mar, apr, maj, jun, jul, aug, sep, okt, nov, dec] | |
# Used in date_select and datime_select. | |
order: [ :day, :month, :year ] | |
time: | |
formats: | |
default: "%a, %d %b %Y %H:%M:%S %z" | |
short: "%d %b %H:%M" | |
long: "%d %B, %Y %H:%M" | |
am: "" | |
pm: "" | |
# Used in array.to_sentence. | |
support: | |
array: | |
sentence_connector: "och" | |
skip_last_comma: true | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment