crc start --log-level debug

[jpoth@localhost ~]$crc start --log-level debug
DEBU No new version available. The latest version is 1.5.0 
INFO Checking if oc binary is cached              
DEBU oc binary already cached                     
INFO Checking if running as non-root              
INFO Checking if Virtualization is enabled        
DEBU Checking if the vmx/svm flags are present in /proc/cpuinfo 
DEBU CPU virtualization flags are good            
INFO Checking if KVM is enabled                   
DEBU Checking if /dev/kvm exists                  
DEBU /dev/kvm was found                           
INFO Checking if libvirt is installed             
DEBU Checking if 'virsh' is available             
DEBU 'virsh' was found in /usr/bin/virsh          
INFO Checking if user is part of libvirt group    
DEBU Checking if current user is part of the libvirt group 
DEBU Current user is already in the libvirt group 
INFO Checking if libvirt is enabled               
DEBU Checking if libvirtd.service is enabled      
DEBU libvirtd.service is already enabled          
INFO Checking if libvirt daemon is running        
DEBU Checking if libvirtd.service is running      
DEBU libvirtd.service is already running          
INFO Checking if a supported libvirt version is installed 
DEBU Checking if libvirt version is >=3.4.0       
INFO Checking if crc-driver-libvirt is installed  
DEBU Checking if crc-driver-libvirt is installed  
DEBU crc-driver-libvirt is already installed in /home/jpoth/.crc/bin/crc-driver-libvirt 
INFO Checking if libvirt 'crc' network is available 
DEBU Checking if libvirt 'crc' network exists     
DEBU libvirt 'crc' network exists                 
INFO Checking if libvirt 'crc' network is active  
DEBU Checking if libvirt 'crc' network is active  
DEBU libvirt 'crc' network is already active      
INFO Checking if NetworkManager is installed      
DEBU Checking if 'nmcli' is available             
DEBU 'nmcli' was found in /usr/bin/nmcli          
INFO Checking if NetworkManager service is running 
DEBU Checking if NetworkManager.service is running 
DEBU NetworkManager.service is already running    
INFO Checking if /etc/NetworkManager/conf.d/crc-nm-dnsmasq.conf exists 
DEBU Checking NetworkManager configuration        
DEBU NetworkManager configuration is good         
INFO Checking if /etc/NetworkManager/dnsmasq.d/crc.conf exists 
DEBU Checking dnsmasq configuration               
DEBU dnsmasq configuration is good                
Checking file: /home/jpoth/.crc/machines/crc/.crc-exist
? Image pull secret [? for help] ******************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************

INFO Extracting bundle: crc_libvirt_4.2.14.crcbundle ... 
DEBU Uncompressing /home/jpoth/.crc/cache/crc_libvirt_4.2.14.crcbundle to /home/jpoth/.crc/cache 
INFO Creating CodeReady Containers VM for OpenShift 4.2.14-x86_64... 
Found binary path at /home/jpoth/.crc/bin/crc-driver-libvirt
Launching plugin server for driver libvirt
Plugin server listening at address 127.0.0.1:36389
() Calling .GetVersion
Using API Version  1
() Calling .SetConfigRaw
() Calling .GetMachineName
(crc) Calling .GetMachineName
(crc) Calling .DriverName
Running pre-create checks...
(crc) Calling .PreCreateCheck
(crc) DBG | About to check libvirt version
(crc) DBG | Validating network
(crc) Calling .GetConfigRaw
Creating machine...
(crc) Calling .Create
(crc) Downloading /home/jpoth/.crc/cache/crc from file:///home/jpoth/.crc/cache/crc_libvirt_4.2.14/crc.qcow2...
(crc) DBG | Verifying executable bit set on /home/jpoth/.crc/machines/crc
(crc) DBG | Setting executable bit set on /home/jpoth/.crc/machines/crc
(crc) DBG | Verifying executable bit set on /home/jpoth/.crc/machines
(crc) DBG | Setting executable bit set on /home/jpoth/.crc/machines
(crc) DBG | Verifying executable bit set on /home/jpoth/.crc
(crc) DBG | Setting executable bit set on /home/jpoth/.crc
(crc) DBG | Verifying executable bit set on /home/jpoth
(crc) DBG | Verifying executable bit set on /home
(crc) DBG | Defining VM...
(crc) DBG | Adding the file: /home/jpoth/.crc/machines/crc/.crc-exist
(crc) DBG | Starting VM crc
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | Waiting for machine to come up 0/60
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | Waiting for machine to come up 1/60
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) Found IP for machine: 192.168.130.11
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .GetConfigRaw
(crc) Calling .DriverName
(crc) Calling .DriverName
Waiting for machine to be running, this may take a few minutes...
(crc) Calling .GetState
(crc) DBG | Getting current state...
Machine is up and running!
Machine successfully created
Created /home/jpoth/.crc/machines/crc/.crc-exist
(crc) Calling .GetState
(crc) DBG | Getting current state...
Found binary path at /home/jpoth/.crc/bin/crc-driver-libvirt
Launching plugin server for driver libvirt
Plugin server listening at address 127.0.0.1:36415
() Calling .GetVersion
Using API Version  1
() Calling .SetConfigRaw
() Calling .GetMachineName
DEBU Waiting until ssh is available               
(crc) Calling .GetSSHHostname
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | Fetching VM...
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .GetSSHPort
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHUsername
Using SSH client type: external
Using SSH private key: /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc (-r--------)
&{[-F /dev/null -o ConnectionAttempts=3 -o ConnectTimeout=10 -o ControlMaster=no -o ControlPath=none -o LogLevel=quiet -o PasswordAuthentication=no -o ServerAliveInterval=60 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null [email protected] -o IdentitiesOnly=yes -i /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc -p 22] /usr/bin/ssh <nil>}
DEBU About to run SSH command:
exit 0             
DEBU SSH cmd err, output: <nil>:                  
INFO Verifying validity of the cluster certificates ... 
(crc) Calling .GetSSHHostname
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .GetSSHPort
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHUsername
Using SSH client type: external
Using SSH private key: /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc (-r--------)
&{[-F /dev/null -o ConnectionAttempts=3 -o ConnectTimeout=10 -o ControlMaster=no -o ControlPath=none -o LogLevel=quiet -o PasswordAuthentication=no -o ServerAliveInterval=60 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null [email protected] -o IdentitiesOnly=yes -i /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc -p 22] /usr/bin/ssh <nil>}
DEBU About to run SSH command:
date --date="$(sudo openssl x509 -in /var/lib/kubelet/pki/kubelet-client-current.pem -noout -enddate | cut -d= -f 2)" --iso-8601=seconds 
DEBU SSH cmd err, output: <nil>: 2020-02-29T04:38:30+00:00 
(crc) Calling .GetIP
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .DriverName
(crc) Calling .GetSSHHostname
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .GetSSHPort
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHUsername
Using SSH client type: external
Using SSH private key: /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc (-r--------)
&{[-F /dev/null -o ConnectionAttempts=3 -o ConnectTimeout=10 -o ControlMaster=no -o ControlPath=none -o LogLevel=quiet -o PasswordAuthentication=no -o ServerAliveInterval=60 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null [email protected] -o IdentitiesOnly=yes -i /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc -p 22] /usr/bin/ssh <nil>}
DEBU About to run SSH command:
echo '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' | openssl enc -base64 -d | sudo tee /var/srv/dnsmasq.conf > /dev/null 
DEBU SSH cmd err, output: <nil>:                  
(crc) Calling .GetSSHHostname
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .GetSSHPort
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHUsername
Using SSH client type: external
Using SSH private key: /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc (-r--------)
&{[-F /dev/null -o ConnectionAttempts=3 -o ConnectTimeout=10 -o ControlMaster=no -o ControlPath=none -o LogLevel=quiet -o PasswordAuthentication=no -o ServerAliveInterval=60 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null [email protected] -o IdentitiesOnly=yes -i /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc -p 22] /usr/bin/ssh <nil>}
DEBU About to run SSH command:
sudo podman rm -f dnsmasq 
DEBU SSH cmd err, output: exit status 1: Error: no container with name or ID dnsmasq found: no such container 
(crc) Calling .GetSSHHostname
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .GetSSHPort
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHUsername
Using SSH client type: external
Using SSH private key: /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc (-r--------)
&{[-F /dev/null -o ConnectionAttempts=3 -o ConnectTimeout=10 -o ControlMaster=no -o ControlPath=none -o LogLevel=quiet -o PasswordAuthentication=no -o ServerAliveInterval=60 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null [email protected] -o IdentitiesOnly=yes -i /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc -p 22] /usr/bin/ssh <nil>}
DEBU About to run SSH command:
sudo rm -f /var/lib/cni/networks/podman/10.88.0.8 
DEBU SSH cmd err, output: <nil>:                  
(crc) Calling .GetSSHHostname
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .GetSSHPort
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHUsername
Using SSH client type: external
Using SSH private key: /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc (-r--------)
&{[-F /dev/null -o ConnectionAttempts=3 -o ConnectTimeout=10 -o ControlMaster=no -o ControlPath=none -o LogLevel=quiet -o PasswordAuthentication=no -o ServerAliveInterval=60 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null [email protected] -o IdentitiesOnly=yes -i /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc -p 22] /usr/bin/ssh <nil>}
DEBU About to run SSH command:
sudo podman run  --ip 10.88.0.8 --name dnsmasq -v /var/srv/dnsmasq.conf:/etc/dnsmasq.conf -p 53:53/udp --privileged -d quay.io/crcont/dnsmasq:latest 
DEBU SSH cmd err, output: <nil>: f39be9df76d37d3a69c9c3fbd2215ad1b9aca3fd457da87ea3a1bbbea14d90b2 
(crc) Calling .GetSSHHostname
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .GetSSHPort
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHUsername
Using SSH client type: external
Using SSH private key: /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc (-r--------)
&{[-F /dev/null -o ConnectionAttempts=3 -o ConnectTimeout=10 -o ControlMaster=no -o ControlPath=none -o LogLevel=quiet -o PasswordAuthentication=no -o ServerAliveInterval=60 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null [email protected] -o IdentitiesOnly=yes -i /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc -p 22] /usr/bin/ssh <nil>}
DEBU About to run SSH command:
cat /etc/resolv.conf 
DEBU SSH cmd err, output: <nil>: # Generated by NetworkManager
nameserver 192.168.130.1 
(crc) Calling .GetSSHHostname
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .GetSSHPort
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHUsername
Using SSH client type: external
Using SSH private key: /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc (-r--------)
&{[-F /dev/null -o ConnectionAttempts=3 -o ConnectTimeout=10 -o ControlMaster=no -o ControlPath=none -o LogLevel=quiet -o PasswordAuthentication=no -o ServerAliveInterval=60 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null [email protected] -o IdentitiesOnly=yes -i /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc -p 22] /usr/bin/ssh <nil>}
DEBU About to run SSH command:
echo IyBHZW5lcmF0ZWQgYnkgQ1JDCnNlYXJjaCBjcmMudGVzdGluZwpuYW1lc2VydmVyIDEwLjg4LjAuOApuYW1lc2VydmVyIDE5Mi4xNjguMTMwLjEKCg== | base64 --decode | sudo tee /etc/resolv.conf > /dev/null 
DEBU SSH cmd err, output: <nil>:                  
(crc) Calling .GetSSHHostname
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .GetSSHPort
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHUsername
Using SSH client type: external
Using SSH private key: /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc (-r--------)
&{[-F /dev/null -o ConnectionAttempts=3 -o ConnectTimeout=10 -o ControlMaster=no -o ControlPath=none -o LogLevel=quiet -o PasswordAuthentication=no -o ServerAliveInterval=60 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null [email protected] -o IdentitiesOnly=yes -i /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc -p 22] /usr/bin/ssh <nil>}
DEBU About to run SSH command:
host -R 3 foo.apps-crc.testing 
DEBU SSH cmd err, output: <nil>: foo.apps-crc.testing has address 192.168.130.11 
INFO Check internal and public DNS query ...      
(crc) Calling .GetSSHHostname
(crc) DBG | GetIP called for crc
(crc) DBG | Getting current state...
(crc) DBG | IP address: 192.168.130.11
(crc) Calling .GetSSHPort
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHKeyPath
(crc) Calling .GetSSHUsername
Using SSH client type: external
Using SSH private key: /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc (-r--------)
&{[-F /dev/null -o ConnectionAttempts=3 -o ConnectTimeout=10 -o ControlMaster=no -o ControlPath=none -o LogLevel=quiet -o PasswordAuthentication=no -o ServerAliveInterval=60 -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null [email protected] -o IdentitiesOnly=yes -i /home/jpoth/.crc/cache/crc_libvirt_4.2.14/id_rsa_crc -p 22] /usr/bin/ssh <nil>}
DEBU About to run SSH command:
host -R 3 quay.io  
DEBU SSH cmd err, output: <nil>: quay.io has address 52.72.254.43
quay.io has address 34.202.115.40
quay.io has address 34.198.225.139
quay.io has address 52.21.62.45
quay.io has address 107.23.216.34
quay.io has address 18.214.53.124
quay.io mail is handled by 20 alt2.aspmx.l.google.com.
quay.io mail is handled by 30 aspmx2.googlemail.com.
quay.io mail is handled by 30 aspmx3.googlemail.com.
quay.io mail is handled by 10 aspmx.l.google.com.
quay.io mail is handled by 20 alt1.aspmx.l.google.com. 
INFO Check DNS query from host ...                
ERRO Failed to query DNS from host: lookup api.crc.testing on 10.38.5.26:53: no such host 
Making call to close driver server
(crc) Calling .Close
(crc) DBG | Closing plugin on server side
Successfully made call to close driver server
Making call to close connection to plugin binary
Making call to close driver server
(crc) Calling .Close
Successfully made call to close driver server
Making call to close connection to plugin binary