Install AVR Rust and Compile Blink

install.sh

git clone [email protected]:avr-rust/rust.git avr-rust
cd avr-rust
git checkout avr-support # 8405b30 at time of writing
cp config.toml.example config.toml

# Manually uncomment experimental-targets setting in config.toml

./x.py build
rustup toolchain link avr $(realpath $(find build -name 'stage2'))
cd ../../
wget https://downloads.arduino.cc/arduino-1.8.12-linux64.tar.xz
tar -xf arduino-1.8.12-linux64.tar.xz
git clone [email protected]:avr-rust/blink.git
cd blink

# set the linker to the toolchain from Arduino, and explicitly disable -pie
# use cargo built from avr-rust.  Path will be different depending on system.
XARGO_RUST_SRC="$(realpath ../avr-rust/src)" \
RUSTFLAGS="-C linker=$(realpath $(../arduino-1.8.12/hardware/tools/avr/bin/avr-gcc)) -C link-args=-no-pie" \
rustup run avr ../avr-rust/build/x86_64-unknown-linux-gnu/stage0/bin/cargo xbuild --target avr-unknown-unknown --verbose

avr-objcopy -O ihex .\target\avr-atmega328p\release\blink.elf blink.hex

I added a script for this in avr-hal: mkhex.sh