NOTE: Content below is written by Adrian Mace. Click here for an updated version.
Below are the key settings that I apply on any unifi installation for optimal performance.
Enable Advanced Features is enabled
| #!python3 | |
| ''' | |
| Directions: | |
| - install yt-dlp via Pip (e.g. using (StaSh)[https://github.com/ywangd/stash] - `pip install yt-dlp`) | |
| - add this script as a Share extension through Settings -> Share Extension Shortcuts | |
| - while watching a video in the YouTube site or app, just share the video to Pythonista and select this script | |
| - the video will download, and when it's done you can share the video file itself with any app (e.g. VLC) | |
| Advanced usage: |
| btrfs fi show -d | |
| (/dev/mapper/vg1000-lv) | |
| syno_poweroff_task -d | |
| (or: umount /volume1) | |
| (or2: umount /volume1 -f -k) | |
| Check to see if all us unmounted: | |
| df -h |
| // Variables used by Scriptable. | |
| // These must be at the very top of the file. Do not edit. | |
| // icon-color: yellow; icon-glyph: download; | |
| // share-sheet-inputs: url; | |
| /******************************************** | |
| * * | |
| * Import Script from Gist * | |
| * * | |
| * This script imports files from a Github * | |
| * Gist. * |
| ;K Line Test created by Sebastianv650 | |
| ; from https://mattshub.com/2017/10/02/linear-advance/ | |
| ; updated for PETG temperatures by luisdelarosa (@louielouie) | |
| ; hotend 240C | |
| ; bed 85C | |
| M107 | |
| M83 ; extruder relative mode | |
| M104 S240 ; set extruder temp | |
| M140 S85 ; set bed temp |
| This is a pretty simple setup: | |
| Siri is used to control Homebridge using the HomeKit protocol. | |
| Homebridge has a module named Homebridge-ssh that allows you to run commands over ssh. | |
| There is a shell script on an OpenWrt box to enable, disable, and check the status of a MAC Address block in the FORWARD table. | |
| 1. Install node on your platform. I went with 8.9 for no specific reason other than I initially had issues with 10 that probably weren't related.. | |
| 2. Install homebridge and homebridge-ssh. You should probably also put hombridge-config-ui-x on there too... I used the unsafe-perm parameter after getting a significant number of errors: | |
| sudo -i npm install -g homebridge --unsafe-perm | |
| sudo -i npm install -g homebridge-ssh --unsafe-perm |
| #include "FastLED.h" | |
| #include "LEDMatrix.h" | |
| #include "LEDText.h" | |
| #include "FontMatrise.h" | |
| #include "lookup.h" | |
| #include "XYMap.h" | |
| FASTLED_USING_NAMESPACE |
| # /etc/nsmb.conf - macOS 11.3 - 2021-04-29 | |
| #------------------------------------------------------------------------------ | |
| # SMB configuration for macOS 11.3 <-> Synology | |
| #------------------------------------------------------------------------------ | |
| # Additional information: | |
| # ----------------------- | |
| # https://support.apple.com/de-de/HT211927 | |
| # https://support.apple.com/en-us/HT208209 | |
| # https://apple.stackexchange.com/questions/309016/smb-share-deadlocks-since-high-sierra | |
| # https://photographylife.com/afp-vs-nfs-vs-smb-performance |
To use media keys on the Ducky One 2 Skyline, you must record a macro to bind the media function to a hotkey combination, i.e. Fn plus some key.
Important: In the instructions below, "Press X+Y+Z" means press and hold key X, press and hold key Y, press and hold key Z in that order, and then release all three.
As an example, to bind Fn+PgUp to the play/pause media function:
| function Get-ProxyAddresses | |
| { | |
| Param( | |
| [Parameter(Mandatory=$true)] | |
| [string[]]$username, | |
| [string[]]$domains = 'domain.com' | |
| ) | |
| #Strip off any leading @ signs people may have provided. We'll add these later | |
| $domains = $domains.Replace('@','') |
