jordanthornquest

[MiSTer]
key_menu_as_rgui=0     ; set to 1 to make the MENU key map to RGUI in Minimig (e.g. for Right Amiga)
forced_scandoubler=0   ; set to 1 to run scandoubler on VGA output always (depends on core).
;ypbpr=0               ; set to 1 for YPbPr on VGA output. (obsolete. see vga_mode)
vga_mode=svideo           ; supported modes: rgb, ypbpr, svideo, cvbs. rgb is default.
ntsc_mode=0            ; Only for S-Video and CVBS vga_mode. 0 - normal NTSC, 1 - PAL-60, 2 - PAL-M.
composite_sync=1       ; set to 1 for composite sync on HSync signal of VGA output.
vga_scaler=0           ; set to 1 to connect VGA to scaler output.
hdmi_audio_96k=0       ; set to 1 for 96khz/16bit HDMI audio (48khz/16bit otherwise)
keyrah_mode=0x18d80002 ; VIDPID of keyrah for special code translation (0x23418037 for Arduino Micro)

jordanthornquest

[MiSTer]
key_menu_as_rgui=0     ; set to 1 to make the MENU key map to RGUI in Minimig (e.g. for Right Amiga)
forced_scandoubler=0   ; set to 1 to run scandoubler on VGA output always (depends on core).
ypbpr=0                ; set to 1 for YPbPr on VGA output.
composite_sync=1       ; set to 1 for composite sync on HSync signal of VGA output.
vga_mode=svideo        ; supported modes: rgb, ypbpr, svideo, cvbs. rgb is default.
vga_scaler=0           ; set to 1 to connect VGA to scaler output.
ntsc_mode=0            ; Only for S-Video and CVBS vga_mode. 0 - normal NTSC, 1 - PAL-60, 2 - PAL-M.
hdmi_audio_96k=0       ; set to 1 for 96khz/16bit HDMI audio (48khz/16bit otherwise)
keyrah_mode=0x18d80002 ; VIDPID of keyrah for special code translation (0x23418037 for Arduino Micro)