josephernest · March 24, 2022 17:23
diff --git a/wave.py b/wave.py
 # wave.py (Enhanced)
 # Date: 2018/04/30 Joseph Ernest
 #
 # URL: https://gist.github.com/josephernest/e3903ba30b820cd199500e50f145a11f
 # Source: Lib/wave.py
 #
 # Added:
 # * IEEE support
 # * 24 bit support
 # * cue + loops markers support
 #
 # Personal notes:
 #  * Test:  ..\wav\____wave_demo.py
 #  * Used in SamplerBox (initfp is identical in SamplerBox), Organum

 """Stuff to parse WAVE files.

 Usage.

 Reading WAVE files:
      f = wave.open(file, 'r')
 where file is either the name of a file or an open file pointer.
 The open file pointer must have methods read(), seek(), and close().
 When the setpos() and rewind() methods are not used, the seek()
 method is not  necessary.

 This returns an instance of a class with the following public methods:
      getnchannels()  -- returns number of audio channels (1 for
                         mono, 2 for stereo)
      getsampwidth()  -- returns sample width in bytes
      getframerate()  -- returns sampling frequency
      getnframes()    -- returns number of audio frames
      getcomptype()   -- returns compression type ('NONE' for linear samples)
      getcompname()   -- returns human-readable version of
                         compression type ('not compressed' linear samples)
      getparams()     -- returns a tuple consisting of all of the
                         above in the above order
      getmarkers()    -- returns None (for compatibility with the
                         aifc module)
      getmark(id)     -- raises an error since the mark does not
                         exist (for compatibility with the aifc module)
      readframes(n)   -- returns at most n frames of audio
      rewind()        -- rewind to the beginning of the audio stream
      setpos(pos)     -- seek to the specified position
      tell()          -- return the current position
      close()         -- close the instance (make it unusable)
 The position returned by tell() and the position given to setpos()
 are compatible and have nothing to do with the actual position in the
 file.
 The close() method is called automatically when the class instance
 is destroyed.

 Writing WAVE files:
      f = wave.open(file, 'w')
 where file is either the name of a file or an open file pointer.
 The open file pointer must have methods write(), tell(), seek(), and
 close().

 This returns an instance of a class with the following public methods:
      setnchannels(n) -- set the number of channels
      setsampwidth(n) -- set the sample width
      setframerate(n) -- set the frame rate
      setnframes(n)   -- set the number of frames
      setcomptype(type, name)
                      -- set the compression type and the
                         human-readable compression type
      setparams(tuple)
                      -- set all parameters at once
      tell()          -- return current position in output file
      writeframesraw(data)
                      -- write audio frames without pathing up the
                         file header
      writeframes(data)
                      -- write audio frames and patch up the file header
      close()         -- patch up the file header and close the
                         output file
 You should set the parameters before the first writeframesraw or
 writeframes.  The total number of frames does not need to be set,
 but when it is set to the correct value, the header does not have to
 be patched up.
 It is best to first set all parameters, perhaps possibly the
 compression type, and then write audio frames using writeframesraw.
 When all frames have been written, either call writeframes('') or
 close() to patch up the sizes in the header.
 The close() method is called automatically when the class instance
 is destroyed.
 """

 import __builtin__

 __all__ = ["open", "openfp", "Error"]

 class Error(Exception):
    pass

 WAVE_FORMAT_PCM = 0x0001
 WAVE_FORMAT_IEEE_FLOAT = 0x0003

 _array_fmts = None, 'b', 'h', None, 'l'

 # Determine endian-ness
 import struct
 if struct.pack("h", 1) == "\000\001":
    big_endian = 1
 else:
    big_endian = 0

 from chunk import Chunk

 class Wave_read:
    """Variables used in this class:

    These variables are available to the user though appropriate
    methods of this class:
    _file -- the open file with methods read(), close(), and seek()
              set through the __init__() method
    _nchannels -- the number of audio channels
              available through the getnchannels() method
    _nframes -- the number of audio frames
              available through the getnframes() method
    _sampwidth -- the number of bytes per audio sample
              available through the getsampwidth() method
    _framerate -- the sampling frequency
              available through the getframerate() method
    _comptype -- the AIFF-C compression type ('NONE' if AIFF)
              available through the getcomptype() method
    _compname -- the human-readable AIFF-C compression type
              available through the getcomptype() method
    _soundpos -- the position in the audio stream
              available through the tell() method, set through the
              setpos() method

    These variables are used internally only:
    _fmt_chunk_read -- 1 iff the FMT chunk has been read
    _data_seek_needed -- 1 iff positioned correctly in audio
              file for readframes()
    _data_chunk -- instantiation of a chunk class for the DATA chunk
    _framesize -- size of one frame in the file
    """

    def initfp(self, file):
        self._convert = None
        self._soundpos = 0
        self._cue = []
        self._loops = []
        self._ieee = False
        self._file = Chunk(file, bigendian = 0)
        if self._file.getname() != 'RIFF':
            raise Error, 'file does not start with RIFF id'
        if self._file.read(4) != 'WAVE':
            raise Error, 'not a WAVE file'
        self._fmt_chunk_read = 0
        self._data_chunk = None
        while 1:
            self._data_seek_needed = 1
            try:
                chunk = Chunk(self._file, bigendian = 0)
            except EOFError:
                break
            chunkname = chunk.getname()
            if chunkname == 'fmt ':
                self._read_fmt_chunk(chunk)
                self._fmt_chunk_read = 1
            elif chunkname == 'data':
                if not self._fmt_chunk_read:
                    raise Error, 'data chunk before fmt chunk'
                self._data_chunk = chunk
                self._nframes = chunk.chunksize // self._framesize
                self._data_seek_needed = 0
            elif chunkname == 'cue ':
                numcue = struct.unpack('<i',chunk.read(4))[0]
                for i in range(numcue): 
                  id, position, datachunkid, chunkstart, blockstart, sampleoffset = struct.unpack('<iiiiii',chunk.read(24))
                  self._cue.append(sampleoffset)
            elif chunkname == 'smpl':
                manuf, prod, sampleperiod, midiunitynote, midipitchfraction, smptefmt, smpteoffs, numsampleloops, samplerdata = struct.unpack('<iiiiIiiii',chunk.read(36))
                for i in range(numsampleloops):
                   cuepointid, type, start, end, fraction, playcount = struct.unpack('<iiiiii',chunk.read(24)) 
                   self._loops.append([start,end]) 
            chunk.skip()
        if not self._fmt_chunk_read or not self._data_chunk:
            raise Error, 'fmt chunk and/or data chunk missing'

    def __init__(self, f):
        self._i_opened_the_file = None
        if isinstance(f, basestring):
            f = __builtin__.open(f, 'rb')
            self._i_opened_the_file = f
        # else, assume it is an open file object already
        try:
            self.initfp(f)
        except:
            if self._i_opened_the_file:
                f.close()
            raise

    def __del__(self):
        self.close()
    #
    # User visible methods.
    #
    def getfp(self):
        return self._file

    def rewind(self):
        self._data_seek_needed = 1
        self._soundpos = 0

    def close(self):
        if self._i_opened_the_file:
            self._i_opened_the_file.close()
            self._i_opened_the_file = None
        self._file = None

    def tell(self):
        return self._soundpos

    def getnchannels(self):
        return self._nchannels

    def getnframes(self):
        return self._nframes

    def getsampwidth(self):
        return self._sampwidth

    def getframerate(self):
        return self._framerate

    def getcomptype(self):
        return self._comptype

    def getcompname(self):
        return self._compname

    def getparams(self):
        return self.getnchannels(), self.getsampwidth(), \
               self.getframerate(), self.getnframes(), \
               self.getcomptype(), self.getcompname()

    def getmarkers(self):
        return self._cue
        
    def getloops(self):
        return self._loops

    def getmark(self, id):
        raise Error, 'no marks'

    def setpos(self, pos):
        if pos < 0 or pos > self._nframes:
            raise Error, 'position not in range'
        self._soundpos = pos
        self._data_seek_needed = 1

    def readframes(self, nframes):
        if self._data_seek_needed:
            self._data_chunk.seek(0, 0)
            pos = self._soundpos * self._framesize
            if pos:
                self._data_chunk.seek(pos, 0)
            self._data_seek_needed = 0
        if nframes == 0:
            return ''
        if self._sampwidth > 1 and big_endian:
            # unfortunately the fromfile() method does not take
            # something that only looks like a file object, so
            # we have to reach into the innards of the chunk object
            import array
            chunk = self._data_chunk
            data = array.array(_array_fmts[self._sampwidth])
            nitems = nframes * self._nchannels
            if nitems * self._sampwidth > chunk.chunksize - chunk.size_read:
                nitems = (chunk.chunksize - chunk.size_read) / self._sampwidth
            data.fromfile(chunk.file.file, nitems)
            # "tell" data chunk how much was read
            chunk.size_read = chunk.size_read + nitems * self._sampwidth
            # do the same for the outermost chunk
            chunk = chunk.file
            chunk.size_read = chunk.size_read + nitems * self._sampwidth
            data.byteswap()
            data = data.tostring()
        else:
            data = self._data_chunk.read(nframes * self._framesize)
        if self._convert and data:
            data = self._convert(data)
        self._soundpos = self._soundpos + len(data) // (self._nchannels * self._sampwidth)
        return data

    #
    # Internal methods.
    #

    def _read_fmt_chunk(self, chunk):
        wFormatTag, self._nchannels, self._framerate, dwAvgBytesPerSec, wBlockAlign = struct.unpack('<HHLLH', chunk.read(14))
        if wFormatTag == WAVE_FORMAT_PCM or wFormatTag == WAVE_FORMAT_IEEE_FLOAT:
            sampwidth = struct.unpack('<H', chunk.read(2))[0]
            self._sampwidth = (sampwidth + 7) // 8
            if wFormatTag == WAVE_FORMAT_IEEE_FLOAT: 
                self._ieee = True
        else:
            raise Error, 'unknown format: %r' % (wFormatTag,)
        self._framesize = self._nchannels * self._sampwidth
        self._comptype = 'NONE'
        self._compname = 'not compressed'

 class Wave_write:
    """Variables used in this class:

    These variables are user settable through appropriate methods
    of this class:
    _file -- the open file with methods write(), close(), tell(), seek()
              set through the __init__() method
    _comptype -- the AIFF-C compression type ('NONE' in AIFF)
              set through the setcomptype() or setparams() method
    _compname -- the human-readable AIFF-C compression type
              set through the setcomptype() or setparams() method
    _nchannels -- the number of audio channels
              set through the setnchannels() or setparams() method
    _sampwidth -- the number of bytes per audio sample
              set through the setsampwidth() or setparams() method
    _framerate -- the sampling frequency
              set through the setframerate() or setparams() method
    _nframes -- the number of audio frames written to the header
              set through the setnframes() or setparams() method

    These variables are used internally only:
    _datalength -- the size of the audio samples written to the header
    _nframeswritten -- the number of frames actually written
    _datawritten -- the size of the audio samples actually written
    """

    def __init__(self, f):
        self._i_opened_the_file = None
        if isinstance(f, basestring):
            f = __builtin__.open(f, 'wb')
            self._i_opened_the_file = f
        try:
            self.initfp(f)
        except:
            if self._i_opened_the_file:
                f.close()
            raise

    def initfp(self, file):
        self._file = file
        self._convert = None
        self._nchannels = 0
        self._sampwidth = 0
        self._framerate = 0
        self._nframes = 0
        self._nframeswritten = 0
        self._datawritten = 0
        self._datalength = 0
        self._headerwritten = False

    def __del__(self):
        self.close()

    #
    # User visible methods.
    #
    def setnchannels(self, nchannels):
        if self._datawritten:
            raise Error, 'cannot change parameters after starting to write'
        if nchannels < 1:
            raise Error, 'bad # of channels'
        self._nchannels = nchannels

    def getnchannels(self):
        if not self._nchannels:
            raise Error, 'number of channels not set'
        return self._nchannels

    def setsampwidth(self, sampwidth):
        if self._datawritten:
            raise Error, 'cannot change parameters after starting to write'
        if sampwidth < 1 or sampwidth > 4:
            raise Error, 'bad sample width'
        self._sampwidth = sampwidth

    def getsampwidth(self):
        if not self._sampwidth:
            raise Error, 'sample width not set'
        return self._sampwidth

    def setframerate(self, framerate):
        if self._datawritten:
            raise Error, 'cannot change parameters after starting to write'
        if framerate <= 0:
            raise Error, 'bad frame rate'
        self._framerate = framerate

    def getframerate(self):
        if not self._framerate:
            raise Error, 'frame rate not set'
        return self._framerate

    def setnframes(self, nframes):
        if self._datawritten:
            raise Error, 'cannot change parameters after starting to write'
        self._nframes = nframes

    def getnframes(self):
        return self._nframeswritten

    def setcomptype(self, comptype, compname):
        if self._datawritten:
            raise Error, 'cannot change parameters after starting to write'
        if comptype not in ('NONE',):
            raise Error, 'unsupported compression type'
        self._comptype = comptype
        self._compname = compname

    def getcomptype(self):
        return self._comptype

    def getcompname(self):
        return self._compname

    def setparams(self, params):
        nchannels, sampwidth, framerate, nframes, comptype, compname = params
        if self._datawritten:
            raise Error, 'cannot change parameters after starting to write'
        self.setnchannels(nchannels)
        self.setsampwidth(sampwidth)
        self.setframerate(framerate)
        self.setnframes(nframes)
        self.setcomptype(comptype, compname)

    def getparams(self):
        if not self._nchannels or not self._sampwidth or not self._framerate:
            raise Error, 'not all parameters set'
        return self._nchannels, self._sampwidth, self._framerate, \
              self._nframes, self._comptype, self._compname

    def setmark(self, id, pos, name):
        raise Error, 'setmark() not supported'

    def getmark(self, id):
        raise Error, 'no marks'

    def getmarkers(self):
        return None

    def tell(self):
        return self._nframeswritten

    def writeframesraw(self, data):
        self._ensure_header_written(len(data))
        nframes = len(data) // (self._sampwidth * self._nchannels)
        if self._convert:
            data = self._convert(data)
        if self._sampwidth > 1 and big_endian:
            import array
            data = array.array(_array_fmts[self._sampwidth], data)
            data.byteswap()
            data.tofile(self._file)
            self._datawritten = self._datawritten + len(data) * self._sampwidth
        else:
            self._file.write(data)
            self._datawritten = self._datawritten + len(data)
        self._nframeswritten = self._nframeswritten + nframes

    def writeframes(self, data):
        self.writeframesraw(data)
        if self._datalength != self._datawritten:
            self._patchheader()

    def close(self):
        if self._file:
            self._ensure_header_written(0)
            if self._datalength != self._datawritten:
                self._patchheader()
            self._file.flush()
            self._file = None
        if self._i_opened_the_file:
            self._i_opened_the_file.close()
            self._i_opened_the_file = None

    #
    # Internal methods.
    #

    def _ensure_header_written(self, datasize):
        if not self._headerwritten:
            if not self._nchannels:
                raise Error, '# channels not specified'
            if not self._sampwidth:
                raise Error, 'sample width not specified'
            if not self._framerate:
                raise Error, 'sampling rate not specified'
            self._write_header(datasize)

    def _write_header(self, initlength):
        assert not self._headerwritten
        self._file.write('RIFF')
        if not self._nframes:
            self._nframes = initlength / (self._nchannels * self._sampwidth)
        self._datalength = self._nframes * self._nchannels * self._sampwidth
        self._form_length_pos = self._file.tell()
        self._file.write(struct.pack('<L4s4sLHHLLHH4s',
            36 + self._datalength, 'WAVE', 'fmt ', 16,
            WAVE_FORMAT_PCM, self._nchannels, self._framerate,
            self._nchannels * self._framerate * self._sampwidth,
            self._nchannels * self._sampwidth,
            self._sampwidth * 8, 'data'))
        self._data_length_pos = self._file.tell()
        self._file.write(struct.pack('<L', self._datalength))
        self._headerwritten = True

    def _patchheader(self):
        assert self._headerwritten
        if self._datawritten == self._datalength:
            return
        curpos = self._file.tell()
        self._file.seek(self._form_length_pos, 0)
        self._file.write(struct.pack('<L', 36 + self._datawritten))
        self._file.seek(self._data_length_pos, 0)
        self._file.write(struct.pack('<L', self._datawritten))
        self._file.seek(curpos, 0)
        self._datalength = self._datawritten

 def open(f, mode=None):
    if mode is None:
        if hasattr(f, 'mode'):
            mode = f.mode
        else:
            mode = 'rb'
    if mode in ('r', 'rb'):
        return Wave_read(f)
    elif mode in ('w', 'wb'):
        return Wave_write(f)
    else:
        raise Error, "mode must be 'r', 'rb', 'w', or 'wb'"

 openfp = open # B/W compatibility
	# wave.py (Enhanced)
	# Date: 2018/04/30 Joseph Ernest
	#
	# URL: https://gist.github.com/josephernest/e3903ba30b820cd199500e50f145a11f
	# Source: Lib/wave.py
	#
	# Added:
	# * IEEE support
	# * 24 bit support
	# * cue + loops markers support
	#
	# Personal notes:
	# * Test: ..\wav\____wave_demo.py
	# * Used in SamplerBox (initfp is identical in SamplerBox), Organum

	"""Stuff to parse WAVE files.

	Usage.

	Reading WAVE files:
	f = wave.open(file, 'r')
	where file is either the name of a file or an open file pointer.
	The open file pointer must have methods read(), seek(), and close().
	When the setpos() and rewind() methods are not used, the seek()
	method is not necessary.

	This returns an instance of a class with the following public methods:
	getnchannels() -- returns number of audio channels (1 for
	mono, 2 for stereo)
	getsampwidth() -- returns sample width in bytes
	getframerate() -- returns sampling frequency
	getnframes() -- returns number of audio frames
	getcomptype() -- returns compression type ('NONE' for linear samples)
	getcompname() -- returns human-readable version of
	compression type ('not compressed' linear samples)
	getparams() -- returns a tuple consisting of all of the
	above in the above order
	getmarkers() -- returns None (for compatibility with the
	aifc module)
	getmark(id) -- raises an error since the mark does not
	exist (for compatibility with the aifc module)
	readframes(n) -- returns at most n frames of audio
	rewind() -- rewind to the beginning of the audio stream
	setpos(pos) -- seek to the specified position
	tell() -- return the current position
	close() -- close the instance (make it unusable)
	The position returned by tell() and the position given to setpos()
	are compatible and have nothing to do with the actual position in the
	file.
	The close() method is called automatically when the class instance
	is destroyed.

	Writing WAVE files:
	f = wave.open(file, 'w')
	where file is either the name of a file or an open file pointer.
	The open file pointer must have methods write(), tell(), seek(), and
	close().

	This returns an instance of a class with the following public methods:
	setnchannels(n) -- set the number of channels
	setsampwidth(n) -- set the sample width
	setframerate(n) -- set the frame rate
	setnframes(n) -- set the number of frames
	setcomptype(type, name)
	-- set the compression type and the
	human-readable compression type
	setparams(tuple)
	-- set all parameters at once
	tell() -- return current position in output file
	writeframesraw(data)
	-- write audio frames without pathing up the
	file header
	writeframes(data)
	-- write audio frames and patch up the file header
	close() -- patch up the file header and close the
	output file
	You should set the parameters before the first writeframesraw or
	writeframes. The total number of frames does not need to be set,
	but when it is set to the correct value, the header does not have to
	be patched up.
	It is best to first set all parameters, perhaps possibly the
	compression type, and then write audio frames using writeframesraw.
	When all frames have been written, either call writeframes('') or
	close() to patch up the sizes in the header.
	The close() method is called automatically when the class instance
	is destroyed.
	"""

	import __builtin__

	__all__ = ["open", "openfp", "Error"]

	class Error(Exception):
	pass

	WAVE_FORMAT_PCM = 0x0001
	WAVE_FORMAT_IEEE_FLOAT = 0x0003

	_array_fmts = None, 'b', 'h', None, 'l'

	# Determine endian-ness
	import struct
	if struct.pack("h", 1) == "\000\001":
	big_endian = 1
	else:
	big_endian = 0

	from chunk import Chunk

	class Wave_read:
	"""Variables used in this class:

	These variables are available to the user though appropriate
	methods of this class:
	_file -- the open file with methods read(), close(), and seek()
	set through the __init__() method
	_nchannels -- the number of audio channels
	available through the getnchannels() method
	_nframes -- the number of audio frames
	available through the getnframes() method
	_sampwidth -- the number of bytes per audio sample
	available through the getsampwidth() method
	_framerate -- the sampling frequency
	available through the getframerate() method
	_comptype -- the AIFF-C compression type ('NONE' if AIFF)
	available through the getcomptype() method
	_compname -- the human-readable AIFF-C compression type
	available through the getcomptype() method
	_soundpos -- the position in the audio stream
	available through the tell() method, set through the
	setpos() method

	These variables are used internally only:
	_fmt_chunk_read -- 1 iff the FMT chunk has been read
	_data_seek_needed -- 1 iff positioned correctly in audio
	file for readframes()
	_data_chunk -- instantiation of a chunk class for the DATA chunk
	_framesize -- size of one frame in the file
	"""

	def initfp(self, file):
	self._convert = None
	self._soundpos = 0
	self._cue = []
	self._loops = []
	self._ieee = False
	self._file = Chunk(file, bigendian = 0)
	if self._file.getname() != 'RIFF':
	raise Error, 'file does not start with RIFF id'
	if self._file.read(4) != 'WAVE':
	raise Error, 'not a WAVE file'
	self._fmt_chunk_read = 0
	self._data_chunk = None
	while 1:
	self._data_seek_needed = 1
	try:
	chunk = Chunk(self._file, bigendian = 0)
	except EOFError:
	break
	chunkname = chunk.getname()
	if chunkname == 'fmt ':
	self._read_fmt_chunk(chunk)
	self._fmt_chunk_read = 1
	elif chunkname == 'data':
	if not self._fmt_chunk_read:
	raise Error, 'data chunk before fmt chunk'
	self._data_chunk = chunk
	self._nframes = chunk.chunksize // self._framesize
	self._data_seek_needed = 0
	elif chunkname == 'cue ':
	numcue = struct.unpack('<i',chunk.read(4))[0]
	for i in range(numcue):
	id, position, datachunkid, chunkstart, blockstart, sampleoffset = struct.unpack('<iiiiii',chunk.read(24))
	self._cue.append(sampleoffset)
	elif chunkname == 'smpl':
	manuf, prod, sampleperiod, midiunitynote, midipitchfraction, smptefmt, smpteoffs, numsampleloops, samplerdata = struct.unpack('<iiiiIiiii',chunk.read(36))
	for i in range(numsampleloops):
	cuepointid, type, start, end, fraction, playcount = struct.unpack('<iiiiii',chunk.read(24))
	self._loops.append([start,end])
	chunk.skip()
	if not self._fmt_chunk_read or not self._data_chunk:
	raise Error, 'fmt chunk and/or data chunk missing'

	def __init__(self, f):
	self._i_opened_the_file = None
	if isinstance(f, basestring):
	f = __builtin__.open(f, 'rb')
	self._i_opened_the_file = f
	# else, assume it is an open file object already
	try:
	self.initfp(f)
	except:
	if self._i_opened_the_file:
	f.close()
	raise

	def __del__(self):
	self.close()
	#
	# User visible methods.
	#
	def getfp(self):
	return self._file

	def rewind(self):
	self._data_seek_needed = 1
	self._soundpos = 0

	def close(self):
	if self._i_opened_the_file:
	self._i_opened_the_file.close()
	self._i_opened_the_file = None
	self._file = None

	def tell(self):
	return self._soundpos

	def getnchannels(self):
	return self._nchannels

	def getnframes(self):
	return self._nframes

	def getsampwidth(self):
	return self._sampwidth

	def getframerate(self):
	return self._framerate

	def getcomptype(self):
	return self._comptype

	def getcompname(self):
	return self._compname

	def getparams(self):
	return self.getnchannels(), self.getsampwidth(), \
	self.getframerate(), self.getnframes(), \
	self.getcomptype(), self.getcompname()

	def getmarkers(self):
	return self._cue

	def getloops(self):
	return self._loops

	def getmark(self, id):
	raise Error, 'no marks'

	def setpos(self, pos):
	if pos < 0 or pos > self._nframes:
	raise Error, 'position not in range'
	self._soundpos = pos
	self._data_seek_needed = 1

	def readframes(self, nframes):
	if self._data_seek_needed:
	self._data_chunk.seek(0, 0)
	pos = self._soundpos * self._framesize
	if pos:
	self._data_chunk.seek(pos, 0)
	self._data_seek_needed = 0
	if nframes == 0:
	return ''
	if self._sampwidth > 1 and big_endian:
	# unfortunately the fromfile() method does not take
	# something that only looks like a file object, so
	# we have to reach into the innards of the chunk object
	import array
	chunk = self._data_chunk
	data = array.array(_array_fmts[self._sampwidth])
	nitems = nframes * self._nchannels
	if nitems * self._sampwidth > chunk.chunksize - chunk.size_read:
	nitems = (chunk.chunksize - chunk.size_read) / self._sampwidth
	data.fromfile(chunk.file.file, nitems)
	# "tell" data chunk how much was read
	chunk.size_read = chunk.size_read + nitems * self._sampwidth
	# do the same for the outermost chunk
	chunk = chunk.file
	chunk.size_read = chunk.size_read + nitems * self._sampwidth
	data.byteswap()
	data = data.tostring()
	else:
	data = self._data_chunk.read(nframes * self._framesize)
	if self._convert and data:
	data = self._convert(data)
	self._soundpos = self._soundpos + len(data) // (self._nchannels * self._sampwidth)
	return data

	#
	# Internal methods.
	#

	def _read_fmt_chunk(self, chunk):
	wFormatTag, self._nchannels, self._framerate, dwAvgBytesPerSec, wBlockAlign = struct.unpack('<HHLLH', chunk.read(14))
	if wFormatTag == WAVE_FORMAT_PCM or wFormatTag == WAVE_FORMAT_IEEE_FLOAT:
	sampwidth = struct.unpack('<H', chunk.read(2))[0]
	self._sampwidth = (sampwidth + 7) // 8
	if wFormatTag == WAVE_FORMAT_IEEE_FLOAT:
	self._ieee = True
	else:
	raise Error, 'unknown format: %r' % (wFormatTag,)
	self._framesize = self._nchannels * self._sampwidth
	self._comptype = 'NONE'
	self._compname = 'not compressed'

	class Wave_write:
	"""Variables used in this class:

	These variables are user settable through appropriate methods
	of this class:
	_file -- the open file with methods write(), close(), tell(), seek()
	set through the __init__() method
	_comptype -- the AIFF-C compression type ('NONE' in AIFF)
	set through the setcomptype() or setparams() method
	_compname -- the human-readable AIFF-C compression type
	set through the setcomptype() or setparams() method
	_nchannels -- the number of audio channels
	set through the setnchannels() or setparams() method
	_sampwidth -- the number of bytes per audio sample
	set through the setsampwidth() or setparams() method
	_framerate -- the sampling frequency
	set through the setframerate() or setparams() method
	_nframes -- the number of audio frames written to the header
	set through the setnframes() or setparams() method

	These variables are used internally only:
	_datalength -- the size of the audio samples written to the header
	_nframeswritten -- the number of frames actually written
	_datawritten -- the size of the audio samples actually written
	"""

	def __init__(self, f):
	self._i_opened_the_file = None
	if isinstance(f, basestring):
	f = __builtin__.open(f, 'wb')
	self._i_opened_the_file = f
	try:
	self.initfp(f)
	except:
	if self._i_opened_the_file:
	f.close()
	raise

	def initfp(self, file):
	self._file = file
	self._convert = None
	self._nchannels = 0
	self._sampwidth = 0
	self._framerate = 0
	self._nframes = 0
	self._nframeswritten = 0
	self._datawritten = 0
	self._datalength = 0
	self._headerwritten = False

	def __del__(self):
	self.close()

	#
	# User visible methods.
	#
	def setnchannels(self, nchannels):
	if self._datawritten:
	raise Error, 'cannot change parameters after starting to write'
	if nchannels < 1:
	raise Error, 'bad # of channels'
	self._nchannels = nchannels

	def getnchannels(self):
	if not self._nchannels:
	raise Error, 'number of channels not set'
	return self._nchannels

	def setsampwidth(self, sampwidth):
	if self._datawritten:
	raise Error, 'cannot change parameters after starting to write'
	if sampwidth < 1 or sampwidth > 4:
	raise Error, 'bad sample width'
	self._sampwidth = sampwidth

	def getsampwidth(self):
	if not self._sampwidth:
	raise Error, 'sample width not set'
	return self._sampwidth

	def setframerate(self, framerate):
	if self._datawritten:
	raise Error, 'cannot change parameters after starting to write'
	if framerate <= 0:
	raise Error, 'bad frame rate'
	self._framerate = framerate

	def getframerate(self):
	if not self._framerate:
	raise Error, 'frame rate not set'
	return self._framerate

	def setnframes(self, nframes):
	if self._datawritten:
	raise Error, 'cannot change parameters after starting to write'
	self._nframes = nframes

	def getnframes(self):
	return self._nframeswritten

	def setcomptype(self, comptype, compname):
	if self._datawritten:
	raise Error, 'cannot change parameters after starting to write'
	if comptype not in ('NONE',):
	raise Error, 'unsupported compression type'
	self._comptype = comptype
	self._compname = compname

	def getcomptype(self):
	return self._comptype

	def getcompname(self):
	return self._compname

	def setparams(self, params):
	nchannels, sampwidth, framerate, nframes, comptype, compname = params
	if self._datawritten:
	raise Error, 'cannot change parameters after starting to write'
	self.setnchannels(nchannels)
	self.setsampwidth(sampwidth)
	self.setframerate(framerate)
	self.setnframes(nframes)
	self.setcomptype(comptype, compname)

	def getparams(self):
	if not self._nchannels or not self._sampwidth or not self._framerate:
	raise Error, 'not all parameters set'
	return self._nchannels, self._sampwidth, self._framerate, \
	self._nframes, self._comptype, self._compname

	def setmark(self, id, pos, name):
	raise Error, 'setmark() not supported'

	def getmark(self, id):
	raise Error, 'no marks'

	def getmarkers(self):
	return None

	def tell(self):
	return self._nframeswritten

	def writeframesraw(self, data):
	self._ensure_header_written(len(data))
	nframes = len(data) // (self._sampwidth * self._nchannels)
	if self._convert:
	data = self._convert(data)
	if self._sampwidth > 1 and big_endian:
	import array
	data = array.array(_array_fmts[self._sampwidth], data)
	data.byteswap()
	data.tofile(self._file)
	self._datawritten = self._datawritten + len(data) * self._sampwidth
	else:
	self._file.write(data)
	self._datawritten = self._datawritten + len(data)
	self._nframeswritten = self._nframeswritten + nframes

	def writeframes(self, data):
	self.writeframesraw(data)
	if self._datalength != self._datawritten:
	self._patchheader()

	def close(self):
	if self._file:
	self._ensure_header_written(0)
	if self._datalength != self._datawritten:
	self._patchheader()
	self._file.flush()
	self._file = None
	if self._i_opened_the_file:
	self._i_opened_the_file.close()
	self._i_opened_the_file = None

	#
	# Internal methods.
	#

	def _ensure_header_written(self, datasize):
	if not self._headerwritten:
	if not self._nchannels:
	raise Error, '# channels not specified'
	if not self._sampwidth:
	raise Error, 'sample width not specified'
	if not self._framerate:
	raise Error, 'sampling rate not specified'
	self._write_header(datasize)

	def _write_header(self, initlength):
	assert not self._headerwritten
	self._file.write('RIFF')
	if not self._nframes:
	self._nframes = initlength / (self._nchannels * self._sampwidth)
	self._datalength = self._nframes * self._nchannels * self._sampwidth
	self._form_length_pos = self._file.tell()
	self._file.write(struct.pack('<L4s4sLHHLLHH4s',
	36 + self._datalength, 'WAVE', 'fmt ', 16,
	WAVE_FORMAT_PCM, self._nchannels, self._framerate,
	self._nchannels * self._framerate * self._sampwidth,
	self._nchannels * self._sampwidth,
	self._sampwidth * 8, 'data'))
	self._data_length_pos = self._file.tell()
	self._file.write(struct.pack('<L', self._datalength))
	self._headerwritten = True

	def _patchheader(self):
	assert self._headerwritten
	if self._datawritten == self._datalength:
	return
	curpos = self._file.tell()
	self._file.seek(self._form_length_pos, 0)
	self._file.write(struct.pack('<L', 36 + self._datawritten))
	self._file.seek(self._data_length_pos, 0)
	self._file.write(struct.pack('<L', self._datawritten))
	self._file.seek(curpos, 0)
	self._datalength = self._datawritten

	def open(f, mode=None):
	if mode is None:
	if hasattr(f, 'mode'):
	mode = f.mode
	else:
	mode = 'rb'
	if mode in ('r', 'rb'):
	return Wave_read(f)
	elif mode in ('w', 'wb'):
	return Wave_write(f)
	else:
	raise Error, "mode must be 'r', 'rb', 'w', or 'wb'"

	openfp = open # B/W compatibility