Configdrive Network JSON

{
    "networks": [ // a network is attached to one link and contains a set of L3 configs, such as IP/netmask or whether to dhcp
        {
            "id": "servicenet", //required
            "type": "ipv4-static", //required
            "link": "servicenet_vlan", //required, single link
            "ip": "10.0.0.5",
            "gateway_ip": "10.0.0.1",
            "netmask": "255.255.0.0"
            "dns_nameservers": ["10.0.3.2"],
            "routes": [ ], // Should we explicitly list default route? I think gateway_ip covers it.
            
        },
        {
            "id": "pubnet", //required
            "type": "ipv6-static", //required
            "link": "bond0.101", //required, single link
            "ip": "52.0.0.5",
            "gateway_ip": "52.0.0.1",
            "netmask": "255.255.0.0"
            "routes": [
                {
                    "destination": "172.16.0.0/0",
                    "gateway_ip": "52.0.0.2",
                },
            ],
        },
        {
            "id": "dhcpnet", //required
            "type": "ipv4-dhcp", //required
            "link": "eth2", //required, single link
            "dhcp_hostname": "foo.bar.example.com"
        },
    ],
    "links": [ // links are L1/L2 devices, such as NICs, bonds, VLANs. 
        {
            "id": "servicenet_vlan", //required
            "type": "vlan", //required
            "vlan_link": "bond0",
            "vlan_id": 401,
            "neutron_port_id": "11111111-1111-1111-1111-111111111111"
            "vlan_link": "bond0" //single link for VLAN
        },
        {
            "id": "bond0", //required
            "type": "bond", //required
            "bond_links": [
                "eth0",
                "eth1"
            ], //required, a list of link ids
            "bond_type": "802.1ad" // required
        },
        {
            "id": "eth0", //required
            "type": "ethernet", //required
            "ethernet_mac_address": "aa:bb:cc:dd:ee:ff" //could be "ethernet_pci_path" instead
        },
        {
            "id": "eth1", //required
            "type": "ethernet", //required
            "ethernet_mac_address": "aa:bb:cc:dd:ee:fe"
        },
        {
            "id": "eth2", //required
            "type": "ethernet", //required
            "ethernet_mac_address": "aa:bb:cc:dd:ee:fd"
        },
    ]
}

@morgabra Alright, fixed both. I left physical_network off for providers because it is specified in ports.