Created
April 21, 2019 14:19
-
-
Save josla972/48d9e63a57ef03e65fcf3d372ff82e4a to your computer and use it in GitHub Desktop.
WN-G300R boot 12.0
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Starting kernel ... | |
CPU platform: Atheros AR9341 rev 1 | |
CPU Frequency=535 MHz | |
CPU DDR Frequency=400 MHz | |
CPU AHB Frequency=200 MHz | |
platform frequency: 535 MHz | |
CPU reference clock: 25 MHz | |
CPU MDIO clock: 25 MHz | |
arguments: | |
a0 = 00000007 | |
a1 = a1f73fb0 | |
a2 = a1f74470 | |
a3 = 00000004 | |
Cmd line:argv is invalid | |
Environment: | |
envp is invalid | |
Cache info: | |
picache_stride = 4096 | |
picache_loopcount = 16 | |
pdcache_stride = 4096 | |
pdcache_loopcount = 8 | |
max line size = 32 | |
cpu0: MIPS Technologies processor v76.151 | |
MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes) | |
L1 i-cache: 4 ways of 512 sets, 32 bytes per line | |
L1 d-cache: 4 ways of 256 sets, 32 bytes per line | |
L2 cache: disabled | |
Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> | |
Config2=0x80001000 | |
Config3=0x2c20<ULRI> | |
Config7=0x80000800<WII> | |
Physical memory chunk(s): | |
0x331000 - 0x1ffffff, 30208000 bytes (7375 pages) | |
Maxmem is 0x2000000 | |
---<<BOOT>>--- | |
KDB: debugger backends: ddb | |
KDB: current backend: ddb | |
Copyright (c) 1992-2019 The FreeBSD Project. | |
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | |
The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | |
FreeBSD 12.0-STABLE #0 092c754da16(HEAD)-dirty: Sun Apr 21 15:23:06 JST 2019 | |
josef@freebsd-virtual:/usr/home/josef/ZRouter/obj/usr/home/josef/ZRouter/ZRouter/tmp/usr/home/josef/freebsd/mips.mips/syss | |
gcc version 6.4.0 (FreeBSD Ports Collection for mips) | |
Preloaded elf kernel "kernel" at 0x8032a74c. | |
real memory = 33554432 (32768K bytes) | |
Physical memory chunk(s): | |
0x003bd000 - 0x01f7dfff, 29102080 bytes (7105 pages) | |
avail memory = 28262400 (26MB) | |
arc4random: no preloaded entropy cache | |
random: entropy device external interface | |
null: <full device, null device, zero device> | |
mem: <memory> | |
nexus0: <MIPS32 root nexus> | |
argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x19000000-0x19000fff on nexus0 | |
mdio0: <MDIO> on argemdio0 | |
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 | |
clock0: <Generic MIPS32 ticker> on nexus0 | |
Timecounter "MIPS32" frequency 267500000 Hz quality 800 | |
Event timer "MIPS32" frequency 267500000 Hz quality 800 | |
argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x1a000000-0x1a000fff on nexus0 | |
mdio1: <MDIO> on argemdio1 | |
mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1 | |
arswitch0: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on mdio1 | |
arswitch0: ar9340_hw_global_setup: GMII | |
arswitch0: ar9340_hw_global_setup: PHY4 - CPU | |
miibus0: <MII bus> on arswitch0 | |
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 | |
ukphy0: OUI 0x00c82e, model 0x0004, rev. 2 | |
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
miibus1: <MII bus> on arswitch0 | |
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 | |
ukphy1: OUI 0x00c82e, model 0x0004, rev. 2 | |
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
miibus2: <MII bus> on arswitch0 | |
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 | |
ukphy2: OUI 0x00c82e, model 0x0004, rev. 2 | |
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
miibus3: <MII bus> on arswitch0 | |
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 | |
ukphy3: OUI 0x00c82e, model 0x0004, rev. 2 | |
ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto | |
etherswitch0: <Switch controller> on arswitch0 | |
mdio2: <MDIO> on arswitch0 | |
mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2 | |
apb0 at irq 4 on nexus0 | |
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0 | |
uart0: console (115200,n,8,1) | |
uart0: fast interrupt | |
uart0: PPS capture mode: DCD | |
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0 | |
gpio0: [GIANT-LOCKED] | |
gpio0: function_set: 0x0 | |
gpio0: function_clear: 0x0 | |
gpio0: gpio pinmask=0x7db000 | |
gpiobus0: <GPIO bus> on gpio0 | |
gpioled0: <GPIO led> at pin 15 on gpiobus0 | |
gpioled1: <GPIO led> at pin 13 on gpiobus0 | |
gpioled2: <GPIO led> at pin 12 on gpiobus0 | |
gpioc0: <GPIO controller> on gpio0 | |
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0 | |
arge0: Overriding MAC from EEPROM | |
miiproxy0: <MII/MDIO proxy, MII side> on arge0 | |
miiproxy0: attached to target mdio1 | |
arge0: finishing attachment, phymask 0001, proxy set | |
arge0: unable to attach PHY 0: 6 | |
miiproxy0: detached | |
device_attach: arge0 attach returned 6 | |
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0 | |
arge1: arge_attach: overriding MII mode to 'GMII' | |
arge1: Generating random ethernet address. | |
mii_attach_proxy: not attaching, no mdio device hint for arge1 | |
arge1: finishing attachment, phymask 0000, proxy null | |
arge1: bpf attached | |
arge1: Ethernet address: 62:73:64:92:23:ee | |
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 | |
spibus0: <SPI bus> on spi0 | |
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 | |
mx25l0: device type en25q32, size 4096K in 64 sectors of 64K, erase size 64K | |
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 | |
Device configuration finished. | |
Timecounters tick every 1.000 msec | |
lo0: bpf attached | |
vlan: initialized, using hash tables with chaining | |
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512 | |
arswitch0port1: link state changed to DOWN | |
arswitch0port2: link state changed to DOWN | |
arswitch0port3: link state changed to DOWN | |
arswitch0port4: link state changed to DOWN | |
GEOM: new disk flash/spi0 | |
Trying to mount root from cd9660:/dev/map/rootfs.uzip []... | |
MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/bootloader" | |
MAP: flash/spi0: 40000x3a0000, data=0x3a0000 "/dev/map/upgrade" | |
MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 | |
MAP: flash/spi0: 40000x100000, data=0x100000 "/dev/map/kernel" | |
MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000 | |
MAP: flash/spi0: 140000x2a0000, data=0x2a0000 "/dev/map/rootfs" | |
MAP: flash/spi0: 3f0000x10000, data=0x10000 "/dev/map/ART" | |
MAP: No valid partition found at map/rootfs.uzip | |
cd9660: RockRidge Extension | |
Warning: no time-of-day clock registered, system time will not be set accurately | |
start_init: trying /sbin/init | |
arswitch0: arswitch_miipollstat: port 0: port -> UP | |
arsed to UP | |
gpio_pin_set_flags: Invalid argument | |
kenv: unable to get HostName | |
kern.coredump: 1 -> 0 | |
net.inet.ip.forwarding: 0 -> 1 | |
memory disk size = 10m | |
MAP: No valid partition found at md0 | |
random: unblocking device. | |
MAP: No valid partition found at md0 | |
lo0: link state changed to UP | |
Thu Jan 1 00:00:32 UTC 1970 | |
login: |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment