tweaked mjpg-streamer init.d script for Raspberry Pi (based on https://github.com/meinside/rpi-mjpg-streamer/blob/master/init/mjpg-streamer.sample)

mjpg-streamer

#!/bin/sh
# /etc/init.d/mjpg-streamer
### BEGIN INIT INFO
# Provides:          mjpg-streamer
# Required-Start:    $network
# Required-Stop:     $network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: mjpg-streamer
# Description:       Streams video to http://localhost/?action=stream on Raspberry Pi
### END INIT INFO

# referenced: http://www.raspberrypi.org/phpBB3/viewtopic.php?t=31212&p=439248
#
# last update: 2014.01.24.


################
# customize these:

# mjpg_streamer's install location
MJPG_STREAMER_INSTALL="/usr/local"

# mjpg_streamer excutable's location
MJPG_STREAMER="$MJPG_STREAMER_INSTALL/bin/mjpg_streamer"

# streaming port
MJPG_STREAMER_PORT="80"

# htmls and related files' location
MJPG_STREAMER_WWW="$MJPG_STREAMER_INSTALL/www"

# video device
DEVICE_IN="/dev/video0"

# video settings
RESOLUTION="1920x1080"
FPS=15

# authentication
USERNAME=""
PASSWORD=""
if [ ! -z $USERNAME ] && [ ! -z $PASSWORD ]; then
	AUTH="-c $USERNAME:$PASSWORD"
else
	AUTH=""
fi

# LED blink
LED="auto"	# on/off/blink/auto (may not work on rpi camera modules)

# plugin
PLUGIN_IN="$MJPG_STREAMER_INSTALL/lib/input_uvc.so -d $DEVICE_IN -r $RESOLUTION -f $FPS -l $LED"
PLUGIN_OUT="$MJPG_STREAMER_INSTALL/lib/output_http.so -p $MJPG_STREAMER_PORT -w $MJPG_STREAMER_WWW $AUTH"

# run
run_exec(){
	$MJPG_STREAMER -i "$PLUGIN_IN" -o "$PLUGIN_OUT" -b
}



case "$1" in
	start)
		echo "Starting mjpg_streamer"
		run_exec
		echo "Started mjpg_streamer"
		;;
	stop)
		echo "Stopping mjpg_streamer."
		killall mjpg_streamer
		echo "Stopped mjpg_streamer"
		;;
	restart)
		echo "Restarting mjpg_streamer"
		killall mjpg_streamer
		run_exec
		sleep 5
		echo "Restarted mjpg_streamer"
		;;
	status)
		pid=`ps -A | grep mjpg_streamer | grep -v "grep" | awk .{print $1}. | head -n 1`
		if [ -n "$pid" ]; then
			echo "mjpg_streamer is running with pid ${pid}"
			echo "mjpg_streamer was started with the following command line"
			cat /proc/${pid}/cmdline ; echo ""
		else
			echo "Could not find mjpg_streamer running"
		fi
		;;
	*)
		echo "Usage: $0 {start|stop|status|restart}"
		exit 1
		;;
esac

exit 0