Skip to content

Instantly share code, notes, and snippets.

@rena2019
rena2019 / deutschlandticket.md
Last active October 20, 2024 22:02
DeutschlandTicket Anomalien

DeutschlandTicket Anomalien

Einige DeutschlandTickets sind anders als die anderen. Preislich soll es für 49EUR starten und für ganz Deutschland einen bestimmten Featureset mitbringen. Folgende Verkehrsverbunde wollen allerdings Zusatzoptionen anbieten:

Falls Ihr noch weitere kennt: einfach unten als Kommentar oder via Twitter ergaenzen

  • Dresdner Verkehrsbetriebe AG (DVB) @ Verkehrsverbund Oberelbe (VVO) bzw siehe PDF vom VVO
    • Deutschlandticket Plus Mitnahme (+10 EUR)
      Berechtigt zur Mitnahme im Verkehrsverbund Oberelbe (VVO) von einem Hund oder einem Fahrrad ohne zeitliche Einschränkung sowie einem weiteren Erwachsenen und bis zu vier Schülern bis zum 15. Geburtstag von Montag bis Freitag zwischen 18 und 4 Uhr sowie ganztags an Wochenenden und Feiertagen.
@juniorz
juniorz / HTTP.md
Last active November 15, 2024 13:00
Tools of trade

Keep-Alive

time telnet www-org.example.com 80

GET / HTTP/1.1
Host: www-org.example.com
Connection: keep-alive

(wait)
@bobrik
bobrik / README.md
Last active November 2, 2024 08:59
CFS hiccups
@timvisee
timvisee / falsehoods-programming-time-list.md
Last active November 15, 2024 16:08
Falsehoods programmers believe about time, in a single list

Falsehoods programmers believe about time

This is a compiled list of falsehoods programmers tend to believe about working with time.

Don't re-invent a date time library yourself. If you think you understand everything about time, you're probably doing it wrong.

Falsehoods

  • There are always 24 hours in a day.
  • February is always 28 days long.
  • Any 24-hour period will always begin and end in the same day (or week, or month).
@bojand
bojand / index.md
Last active July 15, 2024 02:51
gRPC and Load Balancing

Just documenting docs, articles, and discussion related to gRPC and load balancing.

https://github.com/grpc/grpc/blob/master/doc/load-balancing.md

Seems gRPC prefers thin client-side load balancing where a client gets a list of connected clients and a load balancing policy from a "load balancer" and then performs client-side load balancing based on the information. However, this could be useful for traditional load banaling approaches in clound deployments.

https://groups.google.com/forum/#!topic/grpc-io/8s7UHY_Q1po

gRPC "works" in AWS. That is, you can run gRPC services on EC2 nodes and have them connect to other nodes, and everything is fine. If you are using AWS for easy access to hardware then all is fine. What doesn't work is ELB (aka CLB), and ALBs. Neither of these support HTTP/2 (h2c) in a way that gRPC needs.

@v0lkan
v0lkan / silence.sh
Last active October 21, 2024 07:36
How to Have a Silent and High-Performing Western Digital MyCloud Mirror
#
# Needless to say, I (Volkan Ozcelik) take no responsibility, whatsoever,
# about what will happen to your NAS when you try these.
# When did it to mine, I observed *ENORMOUS* performance gain and a zen-like silence.
#
# +----------------------------------------------------------+
# | WHAT YOU ARE GOING TO DO CAN LIKELY VOID YOUR WARRANTY |
# | SO PROCEED WITH CAUTION |
# +----------------------------------------------------------+
#
@mdeguzis
mdeguzis / info pinentry
Created November 9, 2016 18:39
info pinentry
File: pinentry.info, Node: Top, Next: Using pinentry, Up: (dir)
Introduction
************
This manual documents how to use the PINENTRY and its protocol.
The PINENTRY is a small GUI application used to enter PINs or
passphrases. It is usually invoked by GPG-AGENT (*note Invoking the
gpg-agent: (gnupg)Invoking GPG-AGENT, for details).
@gbaman
gbaman / HowToOTGFast.md
Last active October 31, 2024 23:33
Simple guide for setting up OTG modes on the Raspberry Pi Zero, the fast way!

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

@kachayev
kachayev / concurrency-in-go.md
Last active August 22, 2024 14:20
Channels Are Not Enough or Why Pipelining Is Not That Easy
@grugq
grugq / gist:03167bed45e774551155
Last active October 30, 2024 02:44
operational pgp - draft

Operational PGP

This is a guide on how to email securely.

There are many guides on how to install and use PGP to encrypt email. This is not one of them. This is a guide on secure communication using email with PGP encryption. If you are not familiar with PGP, please read another guide first. If you are comfortable using PGP to encrypt and decrypt emails, this guide will raise your security to the next level.