Python Lowpass Filter

lowpass.py

# https://stackoverflow.com/questions/25191620/
#   creating-lowpass-filter-in-scipy-understanding-methods-and-units

import numpy as np
from scipy.signal import butter, lfilter, freqz
from matplotlib import pyplot as plt


def butter_lowpass(cutoff, fs, order=5):
    nyq = 0.5 * fs
    normal_cutoff = cutoff / nyq
    b, a = butter(order, normal_cutoff, btype='low', analog=False)
    return b, a


def butter_lowpass_filter(data, cutoff, fs, order=5):
    b, a = butter_lowpass(cutoff, fs, order=order)
    y = lfilter(b, a, data)
    return y


# Filter requirements.
order = 6
fs = 30.0       # sample rate, Hz
cutoff = 3.667  # desired cutoff frequency of the filter, Hz

# Get the filter coefficients so we can check its frequency response.
b, a = butter_lowpass(cutoff, fs, order)

# Plot the frequency response.
w, h = freqz(b, a, worN=8000)
plt.subplot(2, 1, 1)
plt.plot(0.5*fs*w/np.pi, np.abs(h), 'b')
plt.plot(cutoff, 0.5*np.sqrt(2), 'ko')
plt.axvline(cutoff, color='k')
plt.xlim(0, 0.5*fs)
plt.title("Lowpass Filter Frequency Response")
plt.xlabel('Frequency [Hz]')
plt.grid()


# Demonstrate the use of the filter.
# First make some data to be filtered.
T = 5.0             # seconds
n = int(T * fs)     # total number of samples
t = np.linspace(0, T, n, endpoint=False)
# "Noisy" data.  We want to recover the 1.2 Hz signal from this.
data = np.sin(1.2*2*np.pi*t) + 1.5*np.cos(9*2*np.pi*t) \
        + 0.5*np.sin(12.0*2*np.pi*t)

# Filter the data, and plot both the original and filtered signals.
y = butter_lowpass_filter(data, cutoff, fs, order)

plt.subplot(2, 1, 2)
plt.plot(t, data, 'b-', label='data')
plt.plot(t, y, 'g-', linewidth=2, label='filtered data')
plt.xlabel('Time [sec]')
plt.grid()
plt.legend()

plt.subplots_adjust(hspace=0.35)
plt.show()

Hi. Thanks for your great job. However, I had a silly question. What is the order in this function? can we set the order number randomly or there is a rule for finding this number? Thanks

@Danielaaron1994 Check equation (1 - 11) in this doc
http://www.ece.uah.edu/courses/ee426/Butterworth.pdf

Thank you this is good lesson for me

how can i find cutoff frequency if my frequency is 44100 and i am import a complex data from csv file

Good job man. I have a question . I have a time based data frame (%d/%m/%y %H:%M:%S) I would like to implement denoising using wavelet, Low pass or high pass filtering but I don't know the sampling frequency, how can I get it?. Thanks in advance

Hi,

How can i apply this filter on real time accelerometer values?