Crowsnest config for built-in Chromebook camera plus two cheap USB webcams

crowsnest.conf

#### crowsnest.conf
#### This is a typical default config.
#### Also used as default in mainsail / MainsailOS
#### See:
#### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
#### for details to configure to your needs.


#####################################################################
####                                                            #####
####      Information about ports and according URL's           #####
####                                                            #####
#####################################################################
####                                                            #####
####    Port 8080 equals /webcam/?action=[stream/snapshot]      #####
####    Port 8081 equals /webcam2/?action=[stream/snapshot]     #####
####    Port 8082 equals /webcam3/?action=[stream/snapshot]     #####
####    Port 8083 equals /webcam4/?action=[stream/snapshot]     #####
####                                                            #####
#####################################################################


[crowsnest]
log_path: ~/crowsnest/logs/crowsnest.log
log_level: verbose                      # Valid Options are quiet/verbose/debug
delete_log: false                       # Deletes log on every restart, if set to true

# [cam Chromebook]
# mode: mjpg                              # mjpg/rtsp
# port: 8080                              # Port
# device: /dev/video2                     # See Log for available ...
# resolution: 640x480                     # widthxheight format
# max_fps: 15                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags:                          # You can run the Stream Services with custom flags.
#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.

[cam X5SA]
mode: mjpg                              # mjpg/rtsp
port: 8081                              # Port
device: /dev/video2                     # See Log for available ...
resolution: 1920x1080                     # widthxheight format
max_fps: 15                             # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags:                          # You can run the Stream Services with custom flags.
#v4l2ctl:                               # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.

[cam Ender3]
mode: mjpg
port: 8082
device: /dev/video0
resolution: 1920x1080
max_fps: 15