Instructions for building a Jessie VM to cross-compile openFrameworks 0.9 applications for the Raspberry Pi 1 (arm6)

Cross compiler for RPi, Jessie, openFrameworks 0.9

#ON THE RPI (if you haven't downloaded openFrameworks)

cd
curl -O http://192.237.185.151/versions/nightly/of_v20151008_linuxarmv6l_nightly.tar.gz
mkdir openFrameworks
tar vxfz of_v20151008_linuxarmv6l_nightly.tar.gz -C openFrameworks --strip-components 1
cd /home/pi/openFrameworks/scripts/linux/debian
sudo ./install_dependencies.sh

#INSTALL SMB WITH / ACCESS
# https://gist.github.com/jvcleave/f41132324ca75c2268f9

#ON THE MAC:

#INSTALL VIRTUALBOX

#INSTALL DEBIAN 64BIT JESSIE
#http://gemmei.acc.umu.se/mirror/cdimage/release/8.2.0-live/amd64/iso-hybrid/debian-live-8.2.0-amd64-standard.iso

#Use Bridge Mode (allows access to local network without NAT)
#No Desktop Needed
#Give it at least 10GB storage

#ON THE DEBIAN VM:

#NOTE:BELOW INSTRUCTIONS USE pi AS DEBIAN USER

#ADD pi USER TO ROOT GROUP 
#(via https://www.privateinternetaccess.com/forum/discussion/18063/debian-8-1-0-jessie-sudo-fix-not-installed-by-default)

su
apt-get install sudo
adduser pi sudo
nano /etc/sudoers

# under "User privilege specification" add pi line below to look like

# User privilege specification
root  ALL=(ALL:ALL) ALL
pi    ALL=(ALL:ALL) ALL

#INSTALL NEEDED PACKAGES
sudo apt-get install pkg-config make build-essential cifs-utils avahi-daemon avahi-utils libavahi-compat-libdnssd-dev 


# MOUNT PI ON DEBIAN

sudo mkdir /media/Data

sudo nano /etc/fstab
#ADD LINE (raspberrypi.local is RPi Network address - can be IP)

//raspberrypi.local/Data /media/Data cifs credentials=/home/pi/.smbcredentials,iocharset=utf8 0 0

#save and exit nano

#CREATE FILE TO STORE SMB USER/PASS
nano /home/pi/.smbcredentials

#add RPi samba user/pass (don't add this line)
username=pi
password=raspberry

#save and exit nano

#MOUNT PI
sudo mount -a

#TEST
ls -al /media/Data

#SET ENVIRONMENT VARIABLES
cd
nano .profile

#add lines
export GST_VERSION=1.0
export RPI_ROOT=/home/pi/RPI_ROOT
export RPI_TOOLS=/opt/cross/bin
export TOOLCHAIN_ROOT=/opt/cross/bin
export PLATFORM_OS=Linux
export PLATFORM_ARCH=armv6l
export PKG_CONFIG_PATH=$RPI_ROOT/usr/lib/arm-linux-gnueabihf/pkgconfig:$RPI_ROOT/usr/share/pkgconfig:$RPI_ROOT/usr/lib/pkgconfig

#save and exit nano

#Apply variables
source .profile

#COPY NECESSARY RPI CONTENTS FOR COMPILER

cd
mkdir RPI_ROOT

cd RPI_ROOT
ln -s /media/Data/etc/ etc
ln -s /media/Data/lib/ lib
ln -s /media/Data/opt/ opt

cp -Rv /media/Data/usr/ usr

#FIX HARDCORDED LINKS TO /lib
#TODO Script this: (old fixQualifiedPaths script doesn't work)

cd usr/lib/arm-linux-gnueabihf
rm libudev.so libanl.so libBrokenLocale.so libcidn.so libcrypt.so libdbus-1.so libdl.so libexpat.so libglib-2.0.so liblzma.so libm.so libnsl.so libnss_compat.so libnss_dns.so libnss_files.so libnss_hesiod.so libnss_nisplus.so libnss_nis.so libpcre.so libpng12.so.0 libresolv.so libthread_db.so libusb-0.1.so.4 libusb-1.0.so libutil.so libz.so

ln -s ../../../lib/arm-linux-gnueabihf/libanl.so.1  libanl.so        
ln -s ../../../lib/arm-linux-gnueabihf/libBrokenLocale.so.1  libBrokenLocale.so      
ln -s ../../../lib/arm-linux-gnueabihf/libcidn.so.1  libcidn.so        
ln -s ../../../lib/arm-linux-gnueabihf/libcrypt.so.1  libcrypt.so       
ln -s ../../../lib/arm-linux-gnueabihf/libdbus-1.so.3.8.13  libdbus-1.so       
ln -s ../../../lib/arm-linux-gnueabihf/libdl.so.2  libdl.so        
ln -s ../../../lib/arm-linux-gnueabihf/libexpat.so.1.6.0  libexpat.so       
ln -s ../../../lib/arm-linux-gnueabihf/libglib-2.0.so.0  libglib-2.0.so       
ln -s ../../../lib/arm-linux-gnueabihf/liblzma.so.5.0.0  liblzma.so        
ln -s ../../../lib/arm-linux-gnueabihf/libm.so.6  libm.so        
ln -s ../../../lib/arm-linux-gnueabihf/libnsl.so.1  libnsl.so        
ln -s ../../../lib/arm-linux-gnueabihf/libnss_compat.so.2  libnss_compat.so      
ln -s ../../../lib/arm-linux-gnueabihf/libnss_dns.so.2  libnss_dns.so       
ln -s ../../../lib/arm-linux-gnueabihf/libnss_files.so.2  libnss_files.so      
ln -s ../../../lib/arm-linux-gnueabihf/libnss_hesiod.so.2  libnss_hesiod.so      
ln -s ../../../lib/arm-linux-gnueabihf/libnss_nisplus.so.2  libnss_nisplus.so      
ln -s ../../../lib/arm-linux-gnueabihf/libnss_nis.so.2  libnss_nis.so       
ln -s ../../../lib/arm-linux-gnueabihf/libpcre.so.3  libpcre.so        
ln -s ../../../lib/arm-linux-gnueabihf/libpng12.so.0  libpng12.so.0       
ln -s ../../../lib/arm-linux-gnueabihf/libresolv.so.2  libresolv.so       
ln -s ../../../lib/arm-linux-gnueabihf/libthread_db.so.1  libthread_db.so      
ln -s ../../../lib/arm-linux-gnueabihf/libusb-0.1.so.4  libusb-0.1.so.4      
ln -s ../../../lib/arm-linux-gnueabihf/libusb-1.0.so.0.1.0  libusb-1.0.so       
ln -s ../../../lib/arm-linux-gnueabihf/libutil.so.1  libutil.so        
ln -s ../../../lib/arm-linux-gnueabihf/libz.so.1.2.8  libz.so  
ln -s ../../../lib/arm-linux-gnueabihf/libudev.so.1.5.0 libudev.so

cd

#CREATE CROSS COMPILER

mkdir CROSS_BUILD_TOOLS
cd CROSS_BUILD_TOOLS
wget https://gist.githubusercontent.com/jvcleave/ed342fb2d41564bcdab6/raw/495e723cc8e5c64051f3f16697515c5d0eb95f8c/build_cross_gcc.sh
sudo chmod +x build_cross_gcc.sh
sudo ./build_cross_gcc.sh

#TRY AND COMPILE
make -C /media/Data/home/pi/openFrameworks/examples/empty/emptyExample/

build_cross_gcc.sh

#! /bin/bash
set -e
trap 'previous_command=$this_command; this_command=$BASH_COMMAND' DEBUG
trap 'echo FAILED COMMAND: $previous_command' EXIT

#-------------------------------------------------------------------------------------------
# This script will download packages for, configure, build and install a GCC cross-compiler.
# Customize the variables (INSTALL_PATH, TARGET, etc.) to your liking before running.
# If you get an error and need to resume the script from some point in the middle,
# just delete/comment the preceding lines before running it again.
#
# See: http://preshing.com/20141119/how-to-build-a-gcc-cross-compiler
#-------------------------------------------------------------------------------------------

export SYSROOT=/home/pi/RPI_ROOT


INSTALL_PATH=/opt/cross
TARGET=arm-linux-gnueabihf
LINUX_ARCH=arm
CONFIGURATION_OPTIONS="--disable-werror"
SYSROOT_OPTIONS="--with-sysroot=$SYSROOT --with-build-sysroot=$SYSROOT"
USE_NEWLIB=0
PARALLEL_MAKE=-j4
BINUTILS_VERSION=binutils-2.25.1
GCC_VERSION=gcc-4.9.2
LINUX_KERNEL_VERSION=linux-4.1.7
GLIBC_VERSION=glibc-2.20
MPFR_VERSION=mpfr-3.1.2
GMP_VERSION=gmp-6.0.0a
MPC_VERSION=mpc-1.0.2
ISL_VERSION=isl-0.12.2
CLOOG_VERSION=cloog-0.18.1
export PATH=$INSTALL_PATH/bin:$PATH


# Download packages
export http_proxy=$HTTP_PROXY https_proxy=$HTTP_PROXY ftp_proxy=$HTTP_PROXY
wget -nc https://ftp.gnu.org/gnu/binutils/$BINUTILS_VERSION.tar.gz
wget -nc https://ftp.gnu.org/gnu/gcc/$GCC_VERSION/$GCC_VERSION.tar.gz
wget -nc https://www.kernel.org/pub/linux/kernel/v4.x/$LINUX_KERNEL_VERSION.tar.xz
wget -nc https://ftp.gnu.org/gnu/glibc/$GLIBC_VERSION.tar.xz
wget -nc https://ftp.gnu.org/gnu/mpfr/$MPFR_VERSION.tar.xz
wget -nc https://ftp.gnu.org/gnu/gmp/$GMP_VERSION.tar.xz
wget -nc https://ftp.gnu.org/gnu/mpc/$MPC_VERSION.tar.gz
wget -nc ftp://gcc.gnu.org/pub/gcc/infrastructure/$ISL_VERSION.tar.bz2
wget -nc ftp://gcc.gnu.org/pub/gcc/infrastructure/$CLOOG_VERSION.tar.gz


# Extract everything
for f in *.tar*; do tar xfkv $f; done

# Make symbolic links
cd $GCC_VERSION
ln -sf `ls -1d ../mpfr-*/` mpfr
ln -sf `ls -1d ../gmp-*/` gmp
ln -sf `ls -1d ../mpc-*/` mpc
ln -sf `ls -1d ../isl-*/` isl
ln -sf `ls -1d ../cloog-*/` cloog
cd ..


# Step 1. Binutils
mkdir -p build-binutils
cd build-binutils
../$BINUTILS_VERSION/configure --prefix=$INSTALL_PATH --target=$TARGET $CONFIGURATION_OPTIONS $SYSROOT_OPTIONS  
make $PARALLEL_MAKE
make install
cd ..

# Step 2. Linux Kernel Headers
if [ $USE_NEWLIB -eq 0 ]; then
    cd $LINUX_KERNEL_VERSION
    make ARCH=$LINUX_ARCH INSTALL_HDR_PATH=$INSTALL_PATH/$TARGET headers_install
    cd ..
fi

# Step 3. C/C++ Compilers
mkdir -p build-gcc
cd build-gcc
if [ $USE_NEWLIB -ne 0 ]; then
    NEWLIB_OPTION=--with-newlib
fi
../$GCC_VERSION/configure --prefix=$INSTALL_PATH --target=$TARGET --enable-languages=c,c++ --with-float=hard $CONFIGURATION_OPTIONS $SYSROOT_OPTIONS  
make $PARALLEL_MAKE all-gcc
make install-gcc
cd ..

if [ $USE_NEWLIB -ne 0 ]; then
    # Steps 4-6: Newlib
    mkdir -p build-newlib
    cd build-newlib
    ../newlib-master/configure --prefix=$INSTALL_PATH --target=$TARGET $CONFIGURATION_OPTIONS
    make $PARALLEL_MAKE
    make install
    cd ..
else
    # Step 4. Standard C Library Headers and Startup Files
    mkdir -p build-glibc
    cd build-glibc
    ../$GLIBC_VERSION/configure --prefix=$INSTALL_PATH/$TARGET --build=$MACHTYPE --host=$TARGET --target=$TARGET --with-headers=$INSTALL_PATH/$TARGET/include $CONFIGURATION_OPTIONS libc_cv_forced_unwind=yes
    make install-bootstrap-headers=yes install-headers
    make $PARALLEL_MAKE csu/subdir_lib
    install csu/crt1.o csu/crti.o csu/crtn.o $INSTALL_PATH/$TARGET/lib
    $TARGET-gcc -nostdlib -nostartfiles -shared -x c /dev/null -o $INSTALL_PATH/$TARGET/lib/libc.so
    touch $INSTALL_PATH/$TARGET/include/gnu/stubs.h
    cd ..

    # Step 5. Compiler Support Library
    cd build-gcc
    make $PARALLEL_MAKE all-target-libgcc
    make install-target-libgcc
    cd ..

    # Step 6. Standard C Library & the rest of Glibc
    cd build-glibc
    make $PARALLEL_MAKE
    make install
    cd ..
fi

# Step 7. Standard C++ Library & the rest of GCC
cd build-gcc
make $PARALLEL_MAKE all
make install
cd ..

trap - EXIT
echo 'Success!'

Hi there,

for some reasons when I run sudo ./build_cross_gcc.sh it fails with the error:

The directory that should contain system headers does not exist:
  /home/pi/RPI_ROOT/usr/include
Makefile:2730: recipe for target 'stmp-fixinc' failed
make[1]: *** [stmp-fixinc] Error 1

I definitely made sure that I go thru all steps without mistake (did the process 3 times). Im not even sure what that error means and therefore where to look to fix it :/
If anyone can help me that would be really appreciated :)

I got a Raspberry Pi2 Model B , using debian-live-8.5.0-amd64-standard.iso in VirtualBox and 2016-05-27-raspbian-jessie.img is installed on my Pi.

I am having the same issue as @Meach Meach, did you resolve the libc issue? It looks like the cross folder does not exist in /opt/ ...

looking at the config log these two lines seem to be the problem:

arm-linux-gnueabihf-gcc: error: unrecognized command line option '-qversion'
arm-linux-gnueabihf-gcc: fatal error: no input files

Update: the build_cross_gcc.sh file linked via wget doesn't have the NEWLIB=0 line included. Adding that fixed issue.