Last active
May 30, 2024 02:15
-
-
Save jvhaarst/4388108 to your computer and use it in GitHub Desktop.
Raspberry Pi Sysinfo Script from http://pastebin.com/9ajmhwBg , description at http://andrum99.blogspot.nl/2012/10/sysinfo-script-for-raspberry-pi.html
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| <?php | |
| header("Cache-Control: no-cache, must-revalidate"); | |
| header("Expires: Sat, 26 Jul 1997 05:00:00 GMT"); | |
| header("Pragma: no-cache"); | |
| function human_filesize($bytes, $decimals = 2) { | |
| $sz = 'BKMGTP'; | |
| $factor = floor((strlen($bytes) - 1) / 3); | |
| return sprintf("%.{$decimals}f", $bytes / pow(1024, $factor)) . @$sz[$factor]; | |
| } | |
| $current_time = exec("date +'%d %b %Y<br />%T %Z'"); | |
| $frequency = exec("cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq") / 1000; | |
| $processor = str_replace("-compatible processor", "", explode(": ", exec("cat /proc/cpuinfo | grep model"))[1]); | |
| $cpu_temperature = round(exec("cat /sys/class/thermal/thermal_zone0/temp ") / 1000, 1); | |
| $model = trim(exec('cat /sys/firmware/devicetree/base/model')); | |
| //$RX = exec("ifconfig eth0 | grep 'RX bytes'| cut -d: -f2 | cut -d' ' -f1"); | |
| //$TX = exec("ifconfig eth0 | grep 'TX bytes'| cut -d: -f3 | cut -d' ' -f1"); | |
| list($system, $host, $kernel) = preg_split('/\s/', exec("uname -a"), 4); | |
| $host = exec('hostname -f');; | |
| //Uptime | |
| $uptime_array = explode(" ", exec("cat /proc/uptime")); | |
| $seconds = round($uptime_array[0], 0); | |
| $minutes = $seconds / 60; | |
| $hours = $minutes / 60; | |
| $days = floor($hours / 24); | |
| $hours = sprintf('%02d', floor($hours - ($days * 24))); | |
| $minutes = sprintf('%02d', floor($minutes - ($days * 24 * 60) - ($hours * 60))); | |
| if ($days == 0): | |
| $uptime = $hours . ":" . $minutes . " (hh:mm)"; | |
| elseif($days == 1): | |
| $uptime = $days . " day, " . $hours . ":" . $minutes . " (hh:mm)"; | |
| else: | |
| $uptime = $days . " days, " . $hours . ":" . $minutes . " (hh:mm)"; | |
| endif; | |
| // Load averages | |
| $loadavg = file("/proc/loadavg"); | |
| if (is_array($loadavg)) { | |
| $loadaverages = strtok($loadavg[0], " "); | |
| for ($i = 0; $i < 2; $i++) { | |
| $retval = strtok(" "); | |
| if ($retval === FALSE) break; else $loadaverages .= " " . $retval; | |
| } | |
| } | |
| //Memory Utilisation | |
| $meminfo = file("/proc/meminfo"); | |
| for ($i = 0; $i < count($meminfo); $i++) | |
| { | |
| list($item, $data) = preg_split('/:/', $meminfo[$i], 2); | |
| $item = trim(chop($item)); | |
| $data = intval(preg_replace("/[^0-9]/", "", trim(chop($data)))); //Remove non numeric characters | |
| switch($item) | |
| { | |
| case "MemTotal": $total_mem = $data; break; | |
| case "MemFree": $free_mem = $data; break; | |
| case "SwapTotal": $total_swap = $data; break; | |
| case "SwapFree": $free_swap = $data; break; | |
| case "Buffers": $buffer_mem = $data; break; | |
| case "Cached": $cache_mem = $data; break; | |
| default: break; | |
| } | |
| } | |
| $used_mem = $total_mem - $free_mem; | |
| $used_swap = $total_swap - $free_swap; | |
| $percent_free = round(($free_mem / $total_mem) * 100); | |
| $percent_used = round(($used_mem / $total_mem) * 100); | |
| if ($total_swap) { | |
| $percent_swap = round((($total_swap - $free_swap ) / $total_swap) * 100); | |
| $percent_swap_free = round(($free_swap / $total_swap) * 100); | |
| }else{ | |
| $percent_swap = 0; | |
| $percent_swap_free = 0; | |
| } | |
| $percent_buff = round(($buffer_mem / $total_mem) * 100); | |
| $percent_cach = round(($cache_mem / $total_mem) * 100); | |
| $used_mem = human_filesize($used_mem*1024,0); | |
| $used_swap = human_filesize($used_swap*1024,0); | |
| $total_mem = human_filesize($total_mem*1024,0); | |
| $free_mem = human_filesize($free_mem*1024,0); | |
| $total_swap = human_filesize($total_swap*1024,0); | |
| $free_swap = human_filesize($free_swap*1024,0); | |
| $buffer_mem = human_filesize($buffer_mem*1024,0); | |
| $cache_mem = human_filesize($cache_mem*1024,0); | |
| //Disk space check, with sizes reported in kB | |
| exec("df -T -l -BKB -x tmpfs -x devtmpfs -x rootfs", $diskfree); | |
| $count = 1; | |
| while ($count < sizeof($diskfree)) | |
| { | |
| list($drive[$count], $typex[$count], $size[$count], $used[$count], $avail[$count], $percent[$count], $mount[$count]) = preg_split('/\s+/', $diskfree[$count]); | |
| $percent_part[$count] = str_replace( "%", "", $percent[$count]); | |
| $count++; | |
| } | |
| ?> | |
| <!DOCTYPE html> | |
| <html lang="en"> | |
| <head> | |
| <meta charset="UTF-8"> | |
| <title>System Information</title> | |
| <style type="text/css"> | |
| body { | |
| margin:50px 0px; padding:0px; | |
| text-align:center; | |
| } | |
| #Content { | |
| width:320px; | |
| margin:0px auto; | |
| text-align:left; | |
| padding:15px; | |
| border:1px dashed #333; | |
| background-color:#eee; | |
| } | |
| a { | |
| color:black; | |
| padding-top:5px; | |
| display:block; | |
| } | |
| a:hover { | |
| text-decoration:none; | |
| } | |
| td { | |
| font-family:"DejaVu Sans",Arial,Helvetica,sans-serif; | |
| font-size:12px; | |
| vertical-align:top; | |
| padding-left:2px; | |
| padding-right:2px; | |
| background:#FFFFFF; | |
| } | |
| p { | |
| font-family:"DejaVu Sans", Arial, Helvetica, sans-serif; | |
| font-size:12px; | |
| } | |
| h1 { | |
| font-family:"DejaVu Sans", Arial, Helvetica, sans-serif; | |
| font-size:20px; | |
| text-align:center; | |
| } | |
| td.center { | |
| text-align:center; | |
| } | |
| td.head { | |
| font-weight:bold; | |
| padding-top:3px; | |
| padding-bottom:3px; | |
| } | |
| td.right { | |
| text-align:right; | |
| padding-right:6px; | |
| } | |
| table { | |
| width: 320px; border-spacing:0; | |
| border-collapse:collapse; | |
| } | |
| html,body,.darkbackground { | |
| background:#CCCCCC; | |
| } | |
| body { | |
| color:#000000; | |
| } | |
| td.column1 { | |
| width:60px; | |
| } | |
| td.column3 { | |
| width:120px; | |
| } | |
| td.column4 { | |
| width:30px; | |
| } | |
| div#bar1, div#bar2, div#bar3, div#bar4, div#bar5, div#bar6 { | |
| height:12px; | |
| width:0px; | |
| transition:width 2s; | |
| <?php | |
| $agent = ""; | |
| if(isset($_SERVER['HTTP_USER_AGENT'])) | |
| { | |
| $agent = $_SERVER['HTTP_USER_AGENT']; | |
| } | |
| if(strlen(stristr($agent,"applewebkit")) > 0 ) echo "\n\t\t\t\t-webkit-transition:width 2s;\n"; | |
| else if(strlen(stristr($agent,"gecko")) > 0 ) echo "\n\t\t\t\t-moz-transition:width 2s;\n"; | |
| else if(strlen(stristr($agent,"opera")) > 0 ) echo "\n\t\t\t\t-o-transition:width 2s;\n"; | |
| ?> | |
| } | |
| div#bar1 { background-color:#D78787; } | |
| div#bar2 { background-color:#AFD787; } | |
| div#bar3 { background-color:#F7F7AF; } | |
| div#bar4 { background-color:#87AFD7; } | |
| div#bar5 { background-color:#D7AFD7; } | |
| div#bar6 { background-color:#AFD7D7; } | |
| </style> | |
| <script type="text/javascript"> | |
| function updateText(objectId, text) | |
| { | |
| document.getElementById(objectId).textContent = text; | |
| } | |
| function updateHTML(objectId, html) | |
| { | |
| document.getElementById(objectId).innerHTML = html; | |
| } | |
| function updateDisplay() | |
| { | |
| <?php | |
| echo "\n\t\t\t\tupdateText(\"host\",\"$host\");"; | |
| echo "\n\t\t\t\tupdateText(\"model\",\"$model\");"; | |
| echo "\n\t\t\t\tupdateHTML(\"time\",\"$current_time\");"; | |
| echo "\n\t\t\t\tupdateText(\"kernel\",\"$system\" + \" \" + \"$kernel\");"; | |
| echo "\n\t\t\t\tupdateText(\"processor\",\"$processor\");"; | |
| echo "\n\t\t\t\tupdateText(\"freq\",\"$frequency\" + \"MHz\");"; | |
| echo "\n\t\t\t\tupdateText(\"loadavg\",\"$loadaverages\");"; | |
| echo "\n\t\t\t\tupdateHTML(\"cpu_temperature\",\"$cpu_temperature\" + \"℃\");"; | |
| echo "\n\t\t\t\tupdateText(\"uptime\",\"$uptime\");"; | |
| echo "\n\t\t\t\tupdateText(\"total_mem\",\"$total_mem\" );"; | |
| echo "\n\t\t\t\tupdateText(\"used_mem\",\"$used_mem\" );"; | |
| echo "\n\t\t\t\tupdateText(\"percent_used\",\"$percent_used%\");"; | |
| echo "\n\t\t\t\tupdateText(\"free_mem\",\"$free_mem\" );"; | |
| echo "\n\t\t\t\tupdateText(\"percent_free\",\"$percent_free%\");"; | |
| echo "\n\t\t\t\tupdateText(\"buffer_mem\",\"$buffer_mem\" );"; | |
| echo "\n\t\t\t\tupdateText(\"percent_buff\",\"$percent_buff%\");"; | |
| echo "\n\t\t\t\tupdateText(\"cache_mem\",\"$cache_mem\" );"; | |
| echo "\n\t\t\t\tupdateText(\"percent_cach\",\"$percent_cach%\");"; | |
| echo "\n\t\t\t\tupdateText(\"total_swap\",\"$total_swap\" );"; | |
| echo "\n\t\t\t\tupdateText(\"used_swap\",\"$used_swap\" );"; | |
| echo "\n\t\t\t\tupdateText(\"percent_swap\",\"$percent_swap%\");"; | |
| echo "\n\t\t\t\tupdateText(\"free_swap\",\"$free_swap\" );"; | |
| echo "\n\t\t\t\tupdateText(\"percent_swap_free\",\"$percent_swap_free%\");\n"; | |
| ?> | |
| document.getElementById("bar1").style.width = "<?php echo $percent_used; ?>px"; | |
| document.getElementById("bar2").style.width = "<?php echo $percent_free; ?>px"; | |
| document.getElementById("bar3").style.width = "<?php echo $percent_buff; ?>px"; | |
| document.getElementById("bar4").style.width = "<?php echo $percent_cach; ?>px"; | |
| document.getElementById("bar5").style.width = "<?php echo $percent_swap; ?>px"; | |
| document.getElementById("bar6").style.width = "<?php echo $percent_swap_free; ?>px"; | |
| } | |
| </script> | |
| </head> | |
| <body onload="Javascript: updateDisplay();"> | |
| <div id="Content"> | |
| <h1>System Information</h1> | |
| <table> | |
| <tr> | |
| <td colspan="4" class="head center">General Info</td> | |
| </tr> | |
| <tr> | |
| <td colspan="2">Hostname</td> | |
| <td colspan="2" id="host"></td> | |
| </tr> | |
| <tr> | |
| <td colspan="2">Model</td> | |
| <td colspan="2" id="model"></td> | |
| </tr> | |
| <tr> | |
| <td colspan="2">System Time</td> | |
| <td colspan="2" id="time"></td> | |
| </tr> | |
| <tr> | |
| <td colspan="2">Kernel</td> | |
| <td colspan="2" id="kernel"></td> | |
| </tr> | |
| <tr> | |
| <td colspan="2">Processor</td> | |
| <td colspan="2" id="processor"></td> | |
| </tr> | |
| <tr> | |
| <td colspan="2">CPU Frequency</td> | |
| <td colspan="2" id="freq"></td> | |
| </tr> | |
| <tr> | |
| <td colspan="2">Load Average</td> | |
| <td colspan="2" id="loadavg"></td> | |
| </tr> | |
| <tr> | |
| <td colspan="2">CPU Temperature</td> | |
| <td colspan="2" id="cpu_temperature"></td> | |
| </tr> | |
| <tr> | |
| <td colspan="2">Uptime</td> | |
| <td colspan="2" id="uptime"></td> | |
| </tr> | |
| <tr> | |
| <td colspan="4" class="darkbackground"> </td> | |
| </tr> | |
| <tr> | |
| <td colspan="2" class="head right">Memory:</td> | |
| <td colspan="2" class="head" id="total_mem"><?php echo $total_mem . " kB";?></td> | |
| </tr> | |
| <tr> | |
| <td class="column1">Used</td> | |
| <td class="right" id="used_mem"></td> | |
| <td class="column3"><div id="bar1"> </div></td> | |
| <td class="right column4" id="percent_used"></td> | |
| </tr> | |
| <tr> | |
| <td>Free</td> | |
| <td class="right" id="free_mem"></td> | |
| <td><div id="bar2"></div></td> | |
| <td class="right" id="percent_free"></td> | |
| </tr> | |
| <tr> | |
| <td>Buffered</td> | |
| <td class="right" id="buffer_mem"></td> | |
| <td><div id="bar3"></div></td> | |
| <td class="right" id="percent_buff"></td> | |
| </tr> | |
| <tr> | |
| <td>Cached</td> | |
| <td class="right" id="cache_mem"></td> | |
| <td><div id="bar4"></div></td> | |
| <td class="right" id="percent_cach"></td> | |
| </tr> | |
| <tr> | |
| <td colspan="4" class="darkbackground"> </td> | |
| </tr> | |
| <tr> | |
| <td colspan="2" class="head right">Swap:</td> | |
| <td colspan="2" class="head" id="total_swap"></td> | |
| </tr> | |
| <tr> | |
| <td>Used</td> | |
| <td class="right" id="used_swap"></td> | |
| <td><div id="bar5"></div></td> | |
| <td class="right" id="percent_swap"></td> | |
| </tr> | |
| <tr> | |
| <td>Free</td> | |
| <td class="right" id="free_swap"></td> | |
| <td><div id="bar6"></div></td> | |
| <td class="right" id="percent_swap_free"></td> | |
| </tr> | |
| <tr> | |
| <td colspan="4" class="darkbackground"> </td> | |
| </tr> | |
| </table> | |
| <table id="tblDiskSpace"> | |
| <tr> | |
| <td colspan="4" class="head center">Disk Usage</td> | |
| </tr> | |
| <?php | |
| for ($i = 1; $i < $count; $i++) | |
| { | |
| $total = human_filesize(intval(preg_replace("/[^0-9]/", "", trim($size[$i])))*1024,0); | |
| $usedspace = human_filesize(intval(preg_replace("/[^0-9]/", "", trim($used[$i])))*1024,0); | |
| $freespace = human_filesize(intval(preg_replace("/[^0-9]/", "", trim($avail[$i])))*1024,0); | |
| echo "\n\t\t\t<tr>"; | |
| echo "\n\t\t\t\t<td class=\"head\" colspan=\"4\">" . $mount[$i] . " (" . $typex[$i] . ")</td>"; | |
| echo "\n\t\t\t</tr>"; | |
| echo "\n\t\t\t<tr>"; | |
| echo "\n\t\t\t\t<td> </td>"; | |
| echo "\n\t\t\t\t<td>Total Size</td>"; | |
| echo "\n\t\t\t\t<td class=\"right\">" . $total . "</td>"; | |
| echo "\n\t\t\t\t<td class=\"right\"> </td>"; | |
| echo "\n\t\t\t</tr>"; | |
| echo "\n\t\t\t<tr>"; | |
| echo "\n\t\t\t\t<td> </td>"; | |
| echo "\n\t\t\t\t<td>Used</td>"; | |
| echo "\n\t\t\t\t<td class=\"right\">" . $usedspace . "</td>"; | |
| echo "\n\t\t\t\t<td class=\"right\">" . $percent[$i] . "</td>"; | |
| echo "\n\t\t\t</tr>"; | |
| echo "\n\t\t\t<tr>"; | |
| echo "\n\t\t\t\t<td> </td>"; | |
| echo "\n\t\t\t\t<td>Available</td>"; | |
| echo "\n\t\t\t\t<td class=\"right\">" . $freespace . "</td>"; | |
| echo "\n\t\t\t\t<td class=\"right\">" . (100-(floatval($percent_part[$i]))) . "%</td>"; | |
| echo "\n\t\t\t</tr>"; | |
| if ($i < $count-1): | |
| echo "\n\t\t\t<tr><td colspan=\"4\"> </td></tr>"; | |
| endif; | |
| } | |
| ?> | |
| </table> | |
| <table> | |
| <tr> | |
| <td class="right darkbackground"><a href="javascript:location.reload(true);" title="Refresh">Refresh</a></td> | |
| </tr> | |
| <tr> | |
| <td class="right darkbackground"><a href="https://gist.github.com/4388108">Source</a></td> | |
| </tr> | |
| </table> | |
| </div> | |
| </body> | |
| </html> |
And some process information like running and idle processes too
well i have change it myself and now it looks like this
I am thinking to make it looks more like phpsysteminfo
Please share your ideas with me
@PROX1MO really like your UI, would you add a gist as well?
here it is
https://gist.github.com/PROX1MO
Really awesome code and one more thing the PHP function split is deprecated, instead of that explode will helps !
Hi, if you can adjust the line of HDD info for this:
list($drive[$count], $typex[$count], $size[$count], $used[$count], $avail[$count], $percent[$count], $mount[$count]) = preg_split('/\s+/', $diskfree[$count]);
For me, only work on this method.
I have changed it as per your request, and also added info on which RasPi model , so it now looks like this :
I have changed it as per your request, and also added info on which RasPi model , so it now looks like this :
Awesome, works like a charm.
thanks for share!
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Can you please add some network stats like on phpSysteminfo, because it is too heavy for Pi, Thanks