Envoy feature request

envoy_fr.md

TITLE: Feature request: Would like a way to refuse subsequent TCP connections while allowing current connections enough time to drain

summary

This feature request was originally opened as envoyproxy/envoy#2920, but was too specific about the implementation. This issue updates the title and content to clarify the goals and be flexible about the implementation.

Given I've configured Envoy with LDS serving a TCP proxy listener on some port and there are connections in flight I would like a way to refuse subsequent TCP connections to that port while allowing current established connections to drain

We tried the following approaches, but neither of them achieve our goals:

• the LDS is updated to remove the listener
• Envoy is signalled with a SIGTERM
• Send a GET request to /healthcheck/fail

steps to reproduce

write a bootstrap.yaml like

---
admin:
  access_log_path: /tmp/admin_access.log
  address:
    socket_address:
      address: 0.0.0.0
      port_value: 9901

node:
  id: some-envoy-node
  cluster: some-envoy-cluster

dynamic_resources:
  lds_config:
    path: /cfg/lds-current.yaml

static_resources:
  clusters:
  - name: example_cluster
    connect_timeout: 0.25s
    type: STATIC
    lb_policy: ROUND_ROBIN
    hosts:
    - socket_address:
        address: 93.184.216.3    # IP address of example.com
        port_value: 80

write a lds-current.yaml file like

version_info: "0"
resources:
- "@type": type.googleapis.com/envoy.api.v2.Listener
  name: listener_0
  address:
    socket_address:
      address: 0.0.0.0
      port_value: 8080
  filter_chains:
    - filters:
        - name: envoy.tcp_proxy
          config:
            stat_prefix: ingress_tcp
            cluster: example_cluster

launch envoy (I'm using v1.6.0)

envoy -c /cfg/bootstrap.yaml --v2-config-only --drain-time-s 30

confirm that the TCP proxy is working

curl -v -H 'Host: example.com' 127.0.0.1:8080

Removing the listener

next update the LDS to return an empty set of listeners. this is a two step process. first, write an empty LDS response file lds-empty.yaml

version_info: "1"
resources: []

second, move that file on top of the file being watched:

mv lds-empty.yaml lds-current.yaml

in the Envoy stdout logs you'll see a line

source/server/lds_api.cc:68] lds: remove listener 'listener_0'

attempt to connect to the port where the listener used to be:

curl -v -H 'Host: example.com' 127.0.0.1:8080

expected behavior

Would like to see all new TCP connections be refused immediately, as if a listener had never been added in the first place. Existing TCP connections should continue to be serviced.

actual behavior

the port is still open, even after the LDS update occurs

lsof -i
COMMAND PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
envoy     1 root    9u  IPv4  30166      0t0  TCP *:9901 (LISTEN)
envoy     1 root   22u  IPv4  30171      0t0  TCP *:8080 (LISTEN)

clients can connect to the port, but the TCP proxying seems to hang (can't tell where)

curl -H 'Host: example.com' -v 127.0.0.1:8080
* Rebuilt URL to: 127.0.0.1:8080/
*   Trying 127.0.0.1...
* Connected to 127.0.0.1 (127.0.0.1) port 8080 (#0)
> GET / HTTP/1.1
> Host: example.com
> User-Agent: curl/7.47.0
> Accept: */*
>
^C

this state remains until --drain-time-s time has elapsed (30 seconds in this example). At that point the port is finally closed, so you see

curl 127.0.0.1:8080
curl: (7) Failed to connect to 127.0.0.1 port 8080: Connection refused

pkill -SIGTERM envoy

If instead of removing the listeners we signaled Envoy

pkill -SIGTERM envoy

Envoy exits immediately without allowing current connections to drain

[2018-03-28 17:42:06.995][3563][warning][main] source/server/server.cc:312] caught SIGTERM
[2018-03-28 17:42:06.995][3563][info][main] source/server/server.cc:357] main dispatch loop exited
[2018-03-28 17:42:07.004][3563][info][main] source/server/server.cc:392] exiting

expected behavior

Would like to see all new TCP connections be refused immediately, as if a listener had never been added in the first place. Existing TCP connections should continue to be serviced.

actual behavior

the port is still open, even after the LDS update occurs

lsof -i
COMMAND PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
envoy     1 root    9u  IPv4  30166      0t0  TCP *:9901 (LISTEN)
envoy     1 root   22u  IPv4  30171      0t0  TCP *:8080 (LISTEN)

clients can connect to the port, but the TCP proxying seems to hang (can't tell where)

curl -H 'Host: example.com' -v 127.0.0.1:8080
* Rebuilt URL to: 127.0.0.1:8080/
*   Trying 127.0.0.1...
* Connected to 127.0.0.1 (127.0.0.1) port 8080 (#0)
> GET / HTTP/1.1
> Host: example.com
> User-Agent: curl/7.47.0
> Accept: */*
>
^C

this state remains until --drain-time-s time has elapsed (30 seconds in this example). At that point the port is finally closed, so you see

curl 127.0.0.1:8080
curl: (7) Failed to connect to 127.0.0.1 port 8080: Connection refused

background

In Cloud Foundry, we have the following setup currently:

       Router         =====>       Envoy    ---->    App
(shared ingress)      (TLS)                 TCP

Each application instance has a sidecar Envoy which terminates TLS connections from the shared ingress router. Applications may not speak HTTP, so we use basic TCP connectivity checks from the shared Router to the Envoy in order to infer application health and determine if a client connection should be load-balanced to that Envoy. When the upstream Envoy accepts the TCP connection, the Router considers that upstream healthy. When the upstream refuses the TCP connection, the Router considers that upstream unhealthy.

During a graceful shutdown, the scheduler ought to be able to drain the Envoy before terminating the application. This would mean that the Envoy ought to service any in-flight TCP connections without accepting any new ones.