kamermans · April 26, 2024 00:58 · Dropa · Jul 4, 2017 · C-Duv · Jul 7, 2017
diff --git a/configure_docker0.sh b/configure_docker0.sh
 #!/bin/sh -e
 #
 # NOTE: Since Docker 1.10 (February 4, 2016), it has been possible to configure the
 #   Docker daemon using a JSON config file.  On Linux, this file is normally located at
 #   /etc/docker/daemon.json.  You should use this JSON config method if you are running
 #   a version of Docker that is at least 1.10!
 #   Here is an example configuration that sets the docker0 bridge IP to 192.168.254.1/24:
 #   {
 #     "bip": "192.168.254.1/24"
 #   }
 #
 # You can run this script directly from github as root like this:
 #   curl -sS https://gist.githubusercontent.com/kamermans/94b1c41086de0204750b/raw/configure_docker0.sh | sudo bash -s - 192.168.254.1/24
 #
 # * Make sure you replace "192.168.254.1/24" with the network that you want to use
 #
 # NOTE: This script is intended for Debian / Ubuntu only!

 if [ $# -lt 1 ]; then
    echo "Usage: sudo ./configure_docker0.sh <ip/CIDR>"
    echo "   examples: "
    echo "    ./configure_docker0.sh 10.200.0.57/16"
    echo "    ./configure_docker0.sh 172.31.0.21/16"
    echo "    ./configure_docker0.sh 192.168.254.1/24"
    echo " "
    echo " NOTE: You should stop Docker before running this script."
    echo "       When you restart it, Docker will use the new IP."
    exit 2
 fi

 INIT_SYSTEM="sysv"
 if ps -o comm -1 | grep -q systemd; then
    INIT_SYSTEM="systemd"
 fi

 NEW_IP="$1"
 DOCKER_INIT="/etc/default/docker"

 if [ ! -f "$DOCKER_INIT" ]; then
    cat << EOF > $DOCKER_INIT
 # Docker Upstart and SysVinit configuration file

 # Customize location of Docker binary (especially for development testing).
 #DOCKER="/usr/local/bin/docker"

 # Use DOCKER_OPTS to modify the daemon startup options.
 #DOCKER_OPTS="--dns 8.8.8.8 --dns 8.8.4.4"
 DOCKER_OPTS="--bip=$NEW_IP"

 # If you need Docker to use an HTTP proxy, it can also be specified here.
 #export http_proxy="http://127.0.0.1:3128/"

 # This is also a handy place to tweak where Docker's temporary files go.
 #export TMPDIR="/mnt/bigdrive/docker-tmp"
 EOF

    echo "Created a new Docker default file at $DOCKER_INIT"
    exit 0;
 fi

 echo "Removing old docker0 network(s)"
 NETWORKS=$(ip addr list docker0 | grep "inet " | cut -d" " -f6)
 for NET in $NETWORKS; do
    echo "  $NET"
    ip addr del $NET dev docker0
 done

 echo "Adding new docker0 network"
 ip addr add $NEW_IP dev docker0

 echo "Removing old iptables rules"
 iptables -t nat -F POSTROUTING
 iptables -F DOCKER

 CURRENT_OPTS=$(cat $DOCKER_INIT | grep "^ *DOCKER_OPTS" | sed 's/^/    /g')
 NEW_OPTS=DOCKER_OPTS=\"--bip=$NEW_IP\"

 echo " "

 if [ "$CURRENT_OPTS" != "" ]; then
    TEMP_FILE="/tmp/docker_config.tmp"
    grep -v "^ *DOCKER_OPTS" $DOCKER_INIT > $TEMP_FILE
    echo " " >> $TEMP_FILE
    echo DOCKER_OPTS=\"--bip=$NEW_IP\" >> $TEMP_FILE
    cat $TEMP_FILE > $DOCKER_INIT
    rm -f $TEMP_FILE

    echo "WARNING: The existing DOCKER_OPTS were overwritten in $DOCKER_INIT:"
    echo "Old:"
    echo "$CURRENT_OPTS"
    echo "New:"
    echo "    $NEW_OPTS"
 else
    echo " " >> $DOCKER_INIT
    echo DOCKER_OPTS=\"--bip=$NEW_IP\" >> $DOCKER_INIT
    echo "Success: $DOCKER_INIT has been modified."
 fi

 SYSTEMD_DOCKER_DIR="/etc/systemd/system/docker.service.d"
 if [ "$INIT_SYSTEM" = "systemd" ]; then
    echo "Configuring systemd to use /etc/default/docker"
    if [ ! -d $SYSTEMD_DOCKER_DIR ]; then
        mkdir -p $SYSTEMD_DOCKER_DIR
    fi

    OPTS='$DOCKER_OPTS'
    cat << EOF > $SYSTEMD_DOCKER_DIR/debian-style-config.conf
 # Enable /etc/default/docker configuration files with Systemd
 [Service]
 EnvironmentFile=-/etc/default/docker
 ExecStart=
 ExecStart=/usr/bin/dockerd -H fd:// $OPTS

 EOF
 fi

 echo ""
 echo "Restarting Docker"
 case $INIT_SYSTEM in
    sysv)
        service docker restart
        ;;
    systemd)
        systemctl daemon-reload
        systemctl restart docker.service
        sleep 1
        systemctl status --lines=0 docker.service
        ;;
 esac

 echo "done."
	#!/bin/sh -e
	#
	# NOTE: Since Docker 1.10 (February 4, 2016), it has been possible to configure the
	# Docker daemon using a JSON config file. On Linux, this file is normally located at
	# /etc/docker/daemon.json. You should use this JSON config method if you are running
	# a version of Docker that is at least 1.10!
	# Here is an example configuration that sets the docker0 bridge IP to 192.168.254.1/24:
	# {
	# "bip": "192.168.254.1/24"
	# }
	#
	# You can run this script directly from github as root like this:
	# curl -sS https://gist.githubusercontent.com/kamermans/94b1c41086de0204750b/raw/configure_docker0.sh \| sudo bash -s - 192.168.254.1/24
	#
	# * Make sure you replace "192.168.254.1/24" with the network that you want to use
	#
	# NOTE: This script is intended for Debian / Ubuntu only!

	if [ $# -lt 1 ]; then
	echo "Usage: sudo ./configure_docker0.sh <ip/CIDR>"
	echo " examples: "
	echo " ./configure_docker0.sh 10.200.0.57/16"
	echo " ./configure_docker0.sh 172.31.0.21/16"
	echo " ./configure_docker0.sh 192.168.254.1/24"
	echo " "
	echo " NOTE: You should stop Docker before running this script."
	echo " When you restart it, Docker will use the new IP."
	exit 2
	fi

	INIT_SYSTEM="sysv"
	if ps -o comm -1 \| grep -q systemd; then
	INIT_SYSTEM="systemd"
	fi

	NEW_IP="$1"
	DOCKER_INIT="/etc/default/docker"

	if [ ! -f "$DOCKER_INIT" ]; then
	cat << EOF > $DOCKER_INIT
	# Docker Upstart and SysVinit configuration file

	# Customize location of Docker binary (especially for development testing).
	#DOCKER="/usr/local/bin/docker"

	# Use DOCKER_OPTS to modify the daemon startup options.
	#DOCKER_OPTS="--dns 8.8.8.8 --dns 8.8.4.4"
	DOCKER_OPTS="--bip=$NEW_IP"

	# If you need Docker to use an HTTP proxy, it can also be specified here.
	#export http_proxy="http://127.0.0.1:3128/"

	# This is also a handy place to tweak where Docker's temporary files go.
	#export TMPDIR="/mnt/bigdrive/docker-tmp"
	EOF

	echo "Created a new Docker default file at $DOCKER_INIT"
	exit 0;
	fi

	echo "Removing old docker0 network(s)"
	NETWORKS=$(ip addr list docker0 \| grep "inet " \| cut -d" " -f6)
	for NET in $NETWORKS; do
	echo " $NET"
	ip addr del $NET dev docker0
	done

	echo "Adding new docker0 network"
	ip addr add $NEW_IP dev docker0

	echo "Removing old iptables rules"
	iptables -t nat -F POSTROUTING
	iptables -F DOCKER

	CURRENT_OPTS=$(cat $DOCKER_INIT \| grep "^ *DOCKER_OPTS" \| sed 's/^/ /g')
	NEW_OPTS=DOCKER_OPTS=\"--bip=$NEW_IP\"

	echo " "

	if [ "$CURRENT_OPTS" != "" ]; then
	TEMP_FILE="/tmp/docker_config.tmp"
	grep -v "^ *DOCKER_OPTS" $DOCKER_INIT > $TEMP_FILE
	echo " " >> $TEMP_FILE
	echo DOCKER_OPTS=\"--bip=$NEW_IP\" >> $TEMP_FILE
	cat $TEMP_FILE > $DOCKER_INIT
	rm -f $TEMP_FILE

	echo "WARNING: The existing DOCKER_OPTS were overwritten in $DOCKER_INIT:"
	echo "Old:"
	echo "$CURRENT_OPTS"
	echo "New:"
	echo " $NEW_OPTS"
	else
	echo " " >> $DOCKER_INIT
	echo DOCKER_OPTS=\"--bip=$NEW_IP\" >> $DOCKER_INIT
	echo "Success: $DOCKER_INIT has been modified."
	fi

	SYSTEMD_DOCKER_DIR="/etc/systemd/system/docker.service.d"
	if [ "$INIT_SYSTEM" = "systemd" ]; then
	echo "Configuring systemd to use /etc/default/docker"
	if [ ! -d $SYSTEMD_DOCKER_DIR ]; then
	mkdir -p $SYSTEMD_DOCKER_DIR
	fi

	OPTS='$DOCKER_OPTS'
	cat << EOF > $SYSTEMD_DOCKER_DIR/debian-style-config.conf
	# Enable /etc/default/docker configuration files with Systemd
	[Service]
	EnvironmentFile=-/etc/default/docker
	ExecStart=
	ExecStart=/usr/bin/dockerd -H fd:// $OPTS

	EOF
	fi

	echo ""
	echo "Restarting Docker"
	case $INIT_SYSTEM in
	sysv)
	service docker restart
	;;
	systemd)
	systemctl daemon-reload
	systemctl restart docker.service
	sleep 1
	systemctl status --lines=0 docker.service
	;;
	esac

	echo "done."