Last active
November 26, 2019 05:24
-
-
Save kamilion/f15829424a94916fac9ea9c68159d3ab to your computer and use it in GitHub Desktop.
pine-pinephone-20191101-plasma.img warmboot log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| => mmc info | |
| Device: mmc@1c0f000 | |
| Manufacturer ID: 1b | |
| OEM: 534d | |
| Name: BB1QT | |
| Bus Speed: 50000000 | |
| Mode: SD High Speed (50MHz) | |
| Rd Block Len: 512 | |
| SD version 3.0 | |
| High Capacity: Yes | |
| Capacity: 29.8 GiB | |
| Bus Width: 4-bit | |
| Erase Group Size: 512 Bytes | |
| => reset | |
| resetting ... | |
| U-Boot SPL 2019.10 (Oct 19 2019 - 21:17:46 +0000) | |
| DRAM: 2048 MiB | |
| Trying to boot from MMC1 | |
| NOTICE: BL31: v2.1(release):v3.10.0_rc3-151-ga4b61dc7d9 | |
| NOTICE: BL31: Built : 16:21:59, Jun 12 2019 | |
| NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) | |
| NOTICE: BL31: Found U-Boot DTB at 0x408b1e0, model: Pine64 LTS | |
| NOTICE: BL31: PMIC: Detected AXP803 on RSB. | |
| U-Boot 2019.10 (Oct 19 2019 - 21:17:46 +0000) Allwinner Technology | |
| CPU: Allwinner A64 (SUN50I) | |
| Model: Pine64 LTS | |
| DRAM: 2 GiB | |
| MMC: mmc@1c0f000: 0, mmc@1c11000: 1 | |
| Loading Environment from FAT... Unable to use mmc 1:1... In: serial | |
| Out: serial | |
| Err: serial | |
| Net: phy interface7 | |
| Could not get PHY for ethernet@1c30000: addr 1 | |
| eth-1: ethernet@1c30000 | |
| starting USB... | |
| Bus usb@1c1a000: USB EHCI 1.00 | |
| Bus usb@1c1a400: USB OHCI 1.0 | |
| Bus usb@1c1b000: USB EHCI 1.00 | |
| Bus usb@1c1b400: USB OHCI 1.0 | |
| scanning bus usb@1c1a000 for devices... 1 USB Device(s) found | |
| scanning bus usb@1c1a400 for devices... 1 USB Device(s) found | |
| scanning bus usb@1c1b000 for devices... 1 USB Device(s) found | |
| scanning bus usb@1c1b400 for devices... 1 USB Device(s) found | |
| scanning usb for storage devices... 0 Storage Device(s) found | |
| Hit any key to stop autoboot: 0 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| Scanning mmc 0:1... | |
| Found U-Boot script /boot.scr | |
| 714 bytes read in 2 ms (348.6 KiB/s) | |
| ## Executing script at 4fc00000 | |
| gpio: pin 114 (gpio 114) value is 1 | |
| arch=arm | |
| baudrate=115200 | |
| board=sunxi | |
| board_name=sunxi | |
| boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} | |
| boot_efi_binary=if fdt addr ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr ${fdtcontroladdr};fi;load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi | |
| boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} | |
| boot_net_usb_start=usb start | |
| boot_prefixes=/ /boot/ | |
| boot_script_dhcp=boot.scr.uimg | |
| boot_scripts=boot.scr.uimg boot.scr | |
| boot_syslinux_conf=extlinux/extlinux.conf | |
| boot_targets=fel mmc_auto usb0 pxe dhcp | |
| bootargs=init=/init.sh rw console=tty0 console=ttyS0,115200 no_console_suspend earlycon=uart,mmio32,0x01c28000 panic=10 consoleblank=0 loglevel=1 cma=256M PMOS_NO_OUTPUT_REDIRECT | |
| bootcmd=run distro_bootcmd | |
| bootcmd_dhcp=run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; | |
| bootcmd_fel=if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then echo '(FEL boot)'; source ${fel_scriptaddr}; fi | |
| bootcmd_mmc0=devnum=0; run mmc_boot | |
| bootcmd_mmc1=devnum=1; run mmc_boot | |
| bootcmd_mmc_auto=if test ${mmc_bootdev} -eq 1; then run bootcmd_mmc1; run bootcmd_mmc0; elif test ${mmc_bootdev} -eq 0; then run bootcmd_mmc0; run bootcmd_mmc1; fi | |
| bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi | |
| bootcmd_usb0=devnum=0; run usb_boot | |
| bootdelay=2 | |
| bootfstype=ext4 | |
| bootm_size=0xa000000 | |
| console=ttyS0,115200 | |
| cpu=armv8 | |
| devplist=1 | |
| dfu_alt_info_ram=kernel ram 0x40080000 0x1000000;fdt ram 0x4FA00000 0x100000;ramdisk ram 0x4FE00000 0x4000000 | |
| distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done | |
| efi_dtb_prefixes=/ /dtb/ /dtb/current/ | |
| ethaddr=02:ba:47:94:80:9f | |
| fdt_addr_r=0x4FA00000 | |
| fdtcontroladdr=b9f34258 | |
| fdtfile=allwinner/sun50i-a64-pine64-lts.dtb | |
| fileaddr=4fc00000 | |
| filesize=2ca | |
| kernel_addr_r=0x40080000 | |
| load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} | |
| mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi | |
| mmc_bootdev=0 | |
| partitions=name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};name=loader2,size=984k,uuid=${uuid_gpt_loader2};name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};name=system,size=-,uuid=${uuid_gpt_system}; | |
| preboot=usb start | |
| pxefile_addr_r=0x4FD00000 | |
| ramdisk_addr_r=0x4FE00000 | |
| scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; | |
| scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done; setenv devplist | |
| scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile | |
| scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi | |
| scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done | |
| scriptaddr=0x4FC00000 | |
| serial#=92c001ba4794809f | |
| soc=sunxi | |
| stderr=serial,vidconsole | |
| stdin=serial,usbkbd | |
| stdout=serial,vidconsole | |
| usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi | |
| uuid_gpt_esp=c12a7328-f81f-11d2-ba4b-00a0c93ec93b | |
| uuid_gpt_system=b921b045-1df0-41c3-af44-4c6f280d3fae | |
| Environment size: 4685/131068 bytes | |
| Loading DTB | |
| 29311 bytes read in 4 ms (7 MiB/s) | |
| Loading Initramfs | |
| 4884316 bytes read in 235 ms (19.8 MiB/s) | |
| Loading Kernel | |
| 14170120 bytes read in 666 ms (20.3 MiB/s) | |
| gpio: pin 115 (gpio 115) value is 1 | |
| Resizing FDT | |
| Booting kernel | |
| gpio: pin 116 (gpio 116) value is 1 | |
| ## Loading init Ramdisk from Legacy Image at 4fe00000 ... | |
| Image Name: uInitrd | |
| Image Type: AArch64 Linux RAMDisk Image (uncompressed) | |
| Data Size: 4884252 Bytes = 4.7 MiB | |
| Load Address: 00000000 | |
| Entry Point: 00000000 | |
| Verifying Checksum ... OK | |
| ## Flattened Device Tree blob at 4fa00000 | |
| Booting using the fdt blob at 0x4fa00000 | |
| EHCI failed to shut down host controller. | |
| Loading Ramdisk to 49b57000, end 49fff71c ... OK | |
| Loading Device Tree to 0000000049b4c000, end 0000000049b56fff ... OK | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 5.3.0 (pmos@msi) (gcc version 9.2.0 (Alpine 9.2.0)) #2-postmarketos-allwinner SMP Sun Oct 13 10:33:20 UTC 2019 | |
| [ 0.000000] Machine model: PinePhone | |
| [ 0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '') | |
| [ 0.000000] printk: bootconsole [uart0] enabled | |
| ### postmarketOS initramfs ### | |
| Configuring kernel firmware image search path | |
| modprobe: module sun6i_mipi_dsi not found in modules.dep | |
| modprobe: module sun4i_drm not found in modules.dep | |
| modprobe: module pwm_sun4i not found in modules.dep | |
| modprobe: module sun8i_mixer not found in modules.dep | |
| modprobe: module ext4 not found in modules.dep | |
| modprobe: module usb_f_rndis not found in modules.dep | |
| NOTE: Waiting 10 seconds for the framebuffer /dev/fb0. | |
| If your device does not have a framebuffer, disable this with: | |
| no_framebuffer=true in <https://postmarketos.org/deviceinfo> | |
| Setting framebuffer mode to: U:720x1440p-0 | |
| Setup usb network | |
| /sys/class/android_usb does not exist, skipping android_usb | |
| Setting up an USB gadget through configfs | |
| Starting udhcpd | |
| Using interface usb0 | |
| Start the dhcpcd daemon (forks into background) | |
| Mount boot partition (/dev/mmcblk0p1) | |
| Extract /boot/initramfs-postmarketos-allwinner-extra | |
| 31518 blocks | |
| Check/repair root filesystem (/dev/mmcblk0p2) | |
| e2fsck 1.45.4 (23-Sep-2019) | |
| Pass 1: Checking inodes, blocks, and sizes | |
| Pass 2: Checking directory structure | |
| Pass 3: Checking directory connectivity | |
| Pass 4: Checking reference counts | |
| Pass 5: Checking group summary information | |
| pmOS_root: 70151/100016 files (0.1% non-contiguous), 541403/621312 blocks | |
| Resize root filesystem (/dev/mmcblk0p2) | |
| resize2fs 1.45.4 (23-Sep-2019) | |
| The filesystem is already 621312 (4k) blocks long. Nothing to do! | |
| Mount root partition (/dev/mmcblk0p2) | |
| umount: can't unmount /dev: Invalid argument | |
| OpenRC 0.42.1.034fce6328 is starting up Linux 5.3.0 (aarch64) | |
| /lib/rc/sh/init.sh: line 15: can't create /dev/null: Read-only file system | |
| * md5sum is missing, which suggests /usr is not mounted | |
| * If you have separate /usr, it must be mounted by initramfs | |
| * If not, you should check coreutils is installed correctly | |
| * Mounting /proc ... [ ok ] | |
| * Mounting /run ... * /run/openrc: creating directory | |
| * /run/lock: creating directory | |
| * /run/lock: correcting owner | |
| /lib/rc/sh/init.sh: line 101: can't create /dev/null: Read-only file system | |
| /lib/rc/sh/gendepends.sh: line 28: can't create /dev/null: Read-only file system | |
| * Caching service dependencies ... [ ok ] | |
| * Clock skew detected with `(null)' | |
| * Adjusting mtime of `/run/openrc/deptree' to Fri Nov 1 14:44:20 2019 | |
| * WARNING: clock skew detected! | |
| * Mounting devtmpfs on /dev ... [ ok ] | |
| * Mounting /dev/mqueue ... [ ok ] | |
| * Mounting /dev/pts ... [ ok ] | |
| * Mounting /dev/shm ... [ ok ] | |
| * Mount subpartitions of /dev/mmcblk0 | |
| device-mapper: reload ioctl on mmcblk0p1 failed: Resource busy | |
| create/reload failed on mmcblk0p1 | |
| device-mapper: reload ioctl on mmcblk0p2 failed: Resource busy | |
| create/reload failed on mmcblk0p2 | |
| * Mount subpartitions of /dev/mmcblk2p3 | |
| read error, sector 1 | |
| device-mapper: reload ioctl on mmcblk2p3p1 failed: Invalid argument | |
| create/reload failed on mmcblk2p3p1 | |
| device-mapper: reload ioctl on mmcblk2p3p2 failed: Invalid argument | |
| create/reload failed on mmcblk2p3p2 | |
| * Mounting /sys ... [ ok ] | |
| * Mounting security filesystem ... [ ok ] | |
| * Mounting debug filesystem ... [ ok ] | |
| * Mounting config filesystem ... [ ok ] | |
| * Mounting persistent storage (pstore) filesystem ... [ ok ] | |
| * Starting udev ... [ ok ] | |
| * Generating a rule to create a /dev/root symlink ... [ ok ] | |
| * Populating /dev with existing devices through uevents ... [ ok ] | |
| * WARNING: clock skew detected! | |
| * Loading modules ... [ ok ] | |
| * Setting system clock using the hardware clock [UTC] ... [ ok ] | |
| * Setting the local clock based on last shutdown time ... [ ok ] | |
| * Checking local filesystems ...pmOS_root: Superblock last write time is in the future. | |
| (by less than a day, probably due to the hardware clock being incorrectly set) | |
| pmOS_root: clean, 70151/100016 files, 541403/621312 blocks | |
| pmOS_boot: Superblock last write time is in the future. | |
| (by less than a day, probably due to the hardware clock being incorrectly set) | |
| pmOS_boot: clean, 18/16384 files, 47364/65536 blocks | |
| [ ok ] | |
| * Remounting root filesystem read/write ... [ ok ] | |
| * Remounting filesystems ... [ ok ] | |
| * Mounting local filesystems ... [ ok ] | |
| * Configuring kernel parameters ...sysctl: error: 'net.ipv4.tcp_syncookies' is an unknown key | |
| [ ok ] | |
| * Creating user login records ... [ ok ] | |
| * Wiping /tmp directory ... [ ok ] | |
| * Setting hostname ... [ ok ] | |
| * Starting busybox syslog ... [ ok ] | |
| * WARNING: clock skew detected! | |
| * Starting System Message Bus ... [ ok ] | |
| * Starting RNG Daemon ... [ ok ] | |
| * Could not find a wireless interface | |
| * Starting WPA Supplicant ... [ ok ] | |
| * Starting networkmanager ... [ ok ] | |
| * Starting chronyd ... [ ok ] | |
| * /run/lightdm: creating directory | |
| * /run/lightdm: correcting owner | |
| * Starting Display Manager ... [ ok ] | |
| * Starting oFono ... [ ok ] | |
| * Starting sshd ... [ ok ] | |
| * Activating swap file ...Configured swap file size is 0, skipping creation. | |
| [ ok ] | |
| * Starting local ... [ ok ] | |
| Welcome to postmarketOS | |
| Kernel 5.3.0 on an aarch64 (/dev/ttyS0) | |
| pine64-pinephone login: demo | |
| Password: | |
| Welcome to postmarketOS! | |
| This distribution is based on Alpine Linux. | |
| Read both our wikis to find a large amount of how-to guides and | |
| general information about administrating and development. | |
| See <https://wiki.postmarketos.org> and <https://wiki.alpinelinux.org>. | |
| You may change this message by editing /etc/motd. | |
| pine64-pinephone:~$ sudo -s | |
| [sudo] password for demo: | |
| pine64-pinephone:/home/demo# cd /proc/ | |
| pine64-pinephone:/proc# ls | |
| 1 2077 2740 444 iomem | |
| 10 2078 2741 477 ioports | |
| 11 2080 2745 484 irq | |
| 1180 21 2746 493 kallsyms | |
| 1182 2110 2751 5 key-users | |
| 12 2111 2754 52 keys | |
| 1234 22 2762 57 kmsg | |
| 1251 23 2767 579 kpagecgroup | |
| 1291 2388 2768 580 kpagecount | |
| 1294 24 2769 581 kpageflags | |
| 1298 2416 2771 6 loadavg | |
| 13 2417 2781 652 locks | |
| 1300 2440 2795 66 meminfo | |
| 1303 2441 28 68 misc | |
| 1306 2466 2803 7 modules | |
| 1308 2467 2807 750 mounts | |
| 1309 2490 2808 8 mtd | |
| 1335 2491 2839 9 net | |
| 1361 25 2842 975 pagetypeinfo | |
| 1362 2519 2854 976 partitions | |
| 1386 2551 2862 asound self | |
| 14 2552 2863 buddyinfo slabinfo | |
| 15 2568 2864 bus softirqs | |
| 1503 2586 29 cgroups stat | |
| 1504 2596 3 cmdline swaps | |
| 1505 26 30 config.gz sys | |
| 1533 2604 32 consoles sysrq-trigger | |
| 1534 2624 34 cpuinfo sysvipc | |
| 16 27 373 crypto thread-self | |
| 17 2719 374 device-tree timer_list | |
| 18 2720 376 devices tty | |
| 19 2721 377 diskstats uptime | |
| 1997 2722 378 driver version | |
| 2 2723 395 execdomains vmallocinfo | |
| 20 2724 4 fb vmstat | |
| 2051 2725 426 filesystems zoneinfo | |
| 2054 2735 428 fs | |
| 2065 2739 429 interrupts | |
| pine64-pinephone:/proc# cd /sys/ | |
| block/ class/ devices/ fs/ module/ | |
| bus/ dev/ firmware/ kernel/ power/ | |
| pine64-pinephone:/proc# cd /sys/class/power_supply/ | |
| pine64-pinephone:/sys/class/power_supply# ls | |
| axp20x-battery axp20x-usb axp813-ac | |
| pine64-pinephone:/sys/class/power_supply# cd axp20x-battery/ | |
| pine64-pinephone:/sys/devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp20x-battery-power-supply/power_supply/axp20x-battery# ls | |
| capacity present | |
| constant_charge_current status | |
| constant_charge_current_max subsystem | |
| current_now type | |
| device uevent | |
| health voltage_max_design | |
| hwmon0 voltage_min_design | |
| online voltage_now | |
| pine64-pinephone:/sys/devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp20x-battery-power-supply/power_supply/axp20x-battery# cat health | |
| Good | |
| pine64-pinephone:/sys/devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp20x-battery-power-supply/power_supply/axp20x-battery# cat capacity | |
| pine64-pinephone:/sys/devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp20x-battery-power-supply/power_supply/axp20x-battery# cat present | |
| pine64-pinephone:/sys/devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp20x-battery-power-supply/power_supply/axp20x-battery# cat current_now | |
| pine64-pinephone:/sys/devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp20x-battery-power-supply/power_supply/axp20x-battery# cat online | |
| pine64-pinephone:/sys/devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp20x-battery-power-supply/power_supply/axp20x-battery# cat constant_charge_current | |
| 1200000 | |
| pine64-pinephone:/sys/devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp20x-battery-power-supply/power_supply/axp20x-battery# cd .. | |
| pine64-pinephone:/sys/class/power_supply# cd .. | |
| pine64-pinephone:/sys/class# cd .. | |
| pine64-pinephone:/sys# ls | |
| block class devices fs module | |
| bus dev firmware kernel power | |
| pine64-pinephone:/sys# cd class/ | |
| pine64-pinephone:/sys/class# ls | |
| backlight i2c-dev pwm tee | |
| bdi input regulator thermal | |
| block iommu rfkill tpm | |
| bluetooth lcd rtc tpmrm | |
| bsg leds sas_device tty | |
| devcoredump mdio_bus sas_end_device udc | |
| devfreq mem sas_expander usb_role | |
| dma misc sas_host vc | |
| drm mmc_host sas_phy vfio | |
| extcon mtd sas_port video4linux | |
| gpio net scsi_device vtconsole | |
| graphics phy scsi_disk watchdog | |
| hnae power_supply scsi_host | |
| hwmon pps sound | |
| i2c-adapter ptp spi_master | |
| pine64-pinephone:/sys/class# cd graphics/ | |
| pine64-pinephone:/sys/class/graphics# ls | |
| fb0 fbcon | |
| pine64-pinephone:/sys/class/graphics# cd fb0/ | |
| pine64-pinephone:/sys/devices/platform/display-engine/graphics/fb0# ls | |
| bits_per_pixel device power uevent | |
| blank mode rotate virtual_size | |
| console modes state | |
| cursor name stride | |
| dev pan subsystem | |
| pine64-pinephone:/sys/devices/platform/display-engine/graphics/fb0# cat mode | |
| U:720x1440p-0 | |
| pine64-pinephone:/sys/devices/platform/display-engine/graphics/fb0# cat state | |
| 0 | |
| pine64-pinephone:/sys/devices/platform/display-engine/graphics/fb0# dmesg | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 5.3.0 (pmos@msi) (gcc version 9.2.0 (Alpine 9.2.0)) #2-postmarketos-allwinner SMP Sun Oct 13 10:33:20 UTC 2019 | |
| [ 0.000000] Machine model: PinePhone | |
| [ 0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '') | |
| [ 0.000000] printk: bootconsole [uart0] enabled | |
| [ 0.000000] cma: Reserved 256 MiB at 0x00000000b0000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xafbd3840-0xafbd4fff] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] On node 0 totalpages: 524288 | |
| [ 0.000000] DMA32 zone: 8192 pages used for memmap | |
| [ 0.000000] DMA32 zone: 0 pages reserved | |
| [ 0.000000] DMA32 zone: 524288 pages, LIFO batch:63 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.1 | |
| [ 0.000000] percpu: Embedded 23 pages/cpu s53272 r8192 d32744 u94208 | |
| [ 0.000000] pcpu-alloc: s53272 r8192 d32744 u94208 alloc=23*4096 | |
| [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: ARM erratum 845719 | |
| [ 0.000000] CPU features: detected: ARM erratum 843419 | |
| [ 0.000000] Speculative Store Bypass Disable mitigation not required | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 | |
| [ 0.000000] Policy zone: DMA32 | |
| [ 0.000000] Kernel command line: init=/init.sh rw console=tty0 console=ttyS0,115200 no_console_suspend earlycon=uart,mmio32,0x01c28000 panic=10 consoleblank=0 loglevel=1 cma=256M PMOS_NO_OUTPUT_REDIRECT | |
| [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] Memory: 1775320K/2097152K available (8766K kernel code, 654K rwdata, 3376K rodata, 960K init, 340K bss, 59688K reserved, 262144K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x2e4/0x470 with crng_init=0 | |
| [ 0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1 | |
| [ 0.000000] arch_timer: CPU0: Trapping CNTVCT access | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 0.000401] Console: colour dummy device 80x25 | |
| [ 0.000415] printk: console [tty0] enabled | |
| [ 0.000502] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
| [ 0.000511] pid_max: default: 32768 minimum: 301 | |
| [ 0.000610] LSM: Security Framework initializing | |
| [ 0.000689] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.000709] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.001261] *** VALIDATE proc *** | |
| [ 0.001498] *** VALIDATE cgroup1 *** | |
| [ 0.001506] *** VALIDATE cgroup2 *** | |
| [ 0.002297] ASID allocator initialised with 32768 entries | |
| [ 0.002387] rcu: Hierarchical SRCU implementation. | |
| [ 0.003624] smp: Bringing up secondary CPUs ... | |
| [ 0.004918] Detected VIPT I-cache on CPU1 | |
| [ 0.004974] arch_timer: CPU1: Trapping CNTVCT access | |
| [ 0.004986] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
| [ 0.005914] Detected VIPT I-cache on CPU2 | |
| [ 0.005942] arch_timer: CPU2: Trapping CNTVCT access | |
| [ 0.005950] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
| [ 0.006826] Detected VIPT I-cache on CPU3 | |
| [ 0.006850] arch_timer: CPU3: Trapping CNTVCT access | |
| [ 0.006858] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
| [ 0.006931] smp: Brought up 1 node, 4 CPUs | |
| [ 0.006936] SMP: Total of 4 processors activated. | |
| [ 0.006942] CPU features: detected: 32-bit EL0 Support | |
| [ 0.006948] CPU features: detected: CRC32 instructions | |
| [ 0.007271] CPU: All CPU(s) started at EL2 | |
| [ 0.007290] alternatives: patching kernel code | |
| [ 0.009422] devtmpfs: initialized | |
| [ 0.016000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.016022] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.025932] pinctrl core: initialized pinctrl subsystem | |
| [ 0.027457] NET: Registered protocol family 16 | |
| [ 0.029183] cpuidle: using governor menu | |
| [ 0.029567] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.030974] DMA: preallocated 256 KiB pool for atomic allocations | |
| [ 0.031905] Serial: AMBA PL011 UART driver | |
| [ 0.051096] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.051106] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.051111] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.051116] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.053153] cryptd: max_cpu_qlen set to 1000 | |
| [ 0.058602] SCSI subsystem initialized | |
| [ 0.058988] usbcore: registered new interface driver usbfs | |
| [ 0.059037] usbcore: registered new interface driver hub | |
| [ 0.059113] usbcore: registered new device driver usb | |
| [ 0.059612] mc: Linux media interface: v0.10 | |
| [ 0.059653] videodev: Linux video capture interface: v2.00 | |
| [ 0.059705] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.059708] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.059737] PTP clock support registered | |
| [ 0.059941] EDAC MC: Ver: 3.0.0 | |
| [ 0.061798] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.062027] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.062092] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.062141] *** VALIDATE hugetlbfs *** | |
| [ 0.069523] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.069529] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.070373] NET: Registered protocol family 2 | |
| [ 0.070852] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) | |
| [ 0.070893] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.071052] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) | |
| [ 0.071422] TCP: Hash tables configured (established 16384 bind 16384) | |
| [ 0.071560] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.071619] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.071806] NET: Registered protocol family 1 | |
| [ 0.072300] RPC: Registered named UNIX socket transport module. | |
| [ 0.072304] RPC: Registered udp transport module. | |
| [ 0.072307] RPC: Registered tcp transport module. | |
| [ 0.072309] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.072511] Unpacking initramfs... | |
| [ 0.387805] Freeing initrd memory: 4768K | |
| [ 0.394781] Initialise system trusted keyrings | |
| [ 0.394929] workingset: timestamp_bits=44 max_order=19 bucket_order=0 | |
| [ 0.403595] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.404525] NFS: Registering the id_resolver key type | |
| [ 0.404550] Key type id_resolver registered | |
| [ 0.404554] Key type id_legacy registered | |
| [ 0.404565] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.404767] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.425204] Key type asymmetric registered | |
| [ 0.425210] Asymmetric key parser 'x509' registered | |
| [ 0.425260] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | |
| [ 0.425266] io scheduler mq-deadline registered | |
| [ 0.425270] io scheduler kyber registered | |
| [ 0.426062] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device | |
| [ 0.427029] sun4i-usb-phy 1c19400.phy: failed to get clock usb0_phy | |
| [ 0.427499] sun6i-mipi-dphy 1ca1000.d-phy: Couldn't create the DPHY encoder regmap | |
| [ 0.430992] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver | |
| [ 0.432243] sun50i-a64-r-pinctrl 1f02c00.pinctrl: 1f02c00.pinctrl supply vcc-pl not found, using dummy regulator | |
| [ 0.445446] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.450827] sun6i-mipi-dsi 1ca0000.dsi: Couldn't get VCC-DSI supply | |
| [ 0.453935] lima 1c40000.gpu: bus rate = 200000000 | |
| [ 0.453944] lima 1c40000.gpu: mod rate = 297000000 | |
| [ 0.454206] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 | |
| [ 0.454253] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 | |
| [ 0.454300] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 | |
| [ 0.454340] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus | |
| [ 0.455117] [drm] Initialized lima 1.0.0 20190217 for 1c40000.gpu on minor 0 | |
| [ 0.464380] loop: module loaded | |
| [ 0.466354] libphy: Fixed MDIO Bus: probed | |
| [ 0.466818] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.468643] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.469831] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 0.469838] ehci-platform: EHCI generic platform driver | |
| [ 0.470084] ehci-platform 1c1a000.usb: EHCI Host Controller | |
| [ 0.470115] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1 | |
| [ 0.470235] ehci-platform 1c1a000.usb: irq 15, io mem 0x01c1a000 | |
| [ 0.485807] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 0.486707] hub 1-0:1.0: USB hub found | |
| [ 0.486757] hub 1-0:1.0: 1 port detected | |
| [ 0.487546] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 0.487578] ohci-platform: OHCI generic platform driver | |
| [ 0.487783] ohci-platform 1c1a400.usb: Generic Platform OHCI controller | |
| [ 0.487806] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2 | |
| [ 0.487927] ohci-platform 1c1a400.usb: irq 16, io mem 0x01c1a400 | |
| [ 0.550540] hub 2-0:1.0: USB hub found | |
| [ 0.550587] hub 2-0:1.0: 1 port detected | |
| [ 0.551810] usbcore: registered new interface driver usb-storage | |
| [ 0.554774] sun6i-rtc 1f00000.rtc: registered as rtc0 | |
| [ 0.554785] sun6i-rtc 1f00000.rtc: RTC enabled | |
| [ 0.554929] i2c /dev entries driver | |
| [ 0.556946] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: [email protected] | |
| [ 0.558048] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.558055] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.558192] Synopsys Designware Multimedia Card Interface Driver | |
| [ 0.559087] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.560009] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.560940] usbcore: registered new interface driver usbhid | |
| [ 0.560944] usbhid: USB HID core driver | |
| [ 0.562640] cedrus 1c0e000.video-codec: Device registered as /dev/video0 | |
| [ 0.564304] NET: Registered protocol family 17 | |
| [ 0.564523] 9pnet: Installing 9P2000 support | |
| [ 0.564557] Key type dns_resolver registered | |
| [ 0.565293] registered taskstats version 1 | |
| [ 0.565297] Loading compiled-in X.509 certificates | |
| [ 0.576186] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz | |
| [ 0.576618] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found | |
| [ 0.579360] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0 | |
| [ 0.581148] axp20x-adc axp813-adc: DMA mask not set | |
| [ 0.582119] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set | |
| [ 0.582358] power_supply axp20x-battery: hwmon: 'axp20x-battery' is not a valid name attribute, please fix | |
| [ 0.583125] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set | |
| [ 0.583273] power_supply axp813-ac: hwmon: 'axp813-ac' is not a valid name attribute, please fix | |
| [ 0.584687] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set | |
| [ 0.584893] power_supply axp20x-usb: hwmon: 'axp20x-usb' is not a valid name attribute, please fix | |
| [ 0.586102] dcdc1: supplied by regulator-dummy | |
| [ 0.586503] dcdc2: supplied by regulator-dummy | |
| [ 0.586751] dcdc4: supplied by regulator-dummy | |
| [ 0.587015] dcdc5: supplied by regulator-dummy | |
| [ 0.587267] dcdc6: supplied by regulator-dummy | |
| [ 0.587511] dc1sw: supplied by regulator-dummy | |
| [ 0.587768] aldo1: supplied by regulator-dummy | |
| [ 0.587829] dovdd-csi: Bringing 3300000uV into 2800000-2800000uV | |
| [ 0.588067] aldo2: supplied by regulator-dummy | |
| [ 0.588319] aldo3: supplied by regulator-dummy | |
| [ 0.588606] dldo1: supplied by regulator-dummy | |
| [ 0.588860] dldo2: supplied by regulator-dummy | |
| [ 0.588920] vcc-mipi-io: Bringing 2900000uV into 3300000-3300000uV | |
| [ 0.589167] dldo3: supplied by regulator-dummy | |
| [ 0.589227] avdd-csi: Bringing 2900000uV into 2800000-2800000uV | |
| [ 0.589484] dldo4: supplied by regulator-dummy | |
| [ 0.589744] eldo1: supplied by regulator-dummy | |
| [ 0.590065] eldo2: supplied by regulator-dummy | |
| [ 0.590359] eldo3: supplied by regulator-dummy | |
| [ 0.590422] dvdd-1v8-csi: Bringing 700000uV into 1800000-1800000uV | |
| [ 0.590656] fldo1: supplied by regulator-dummy | |
| [ 0.590930] fldo2: supplied by regulator-dummy | |
| [ 0.591228] rtc-ldo: supplied by regulator-dummy | |
| [ 0.591448] ldo-io0: supplied by regulator-dummy | |
| [ 0.591521] vcc-lcd: Bringing 3300000uV into 2800000-2800000uV | |
| [ 0.591820] ldo-io1: supplied by regulator-dummy | |
| [ 0.591883] vcc-1v8-typec: Bringing 3300000uV into 1800000-1800000uV | |
| [ 0.592152] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded | |
| [ 0.597318] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver | |
| [ 0.597653] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator | |
| [ 0.597764] pwm-backlight backlight: backlight supply power not found, using dummy regulator | |
| [ 0.614329] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator | |
| [ 0.614834] printk: console [ttyS0] disabled | |
| [ 0.635366] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 26, base_baud = 1500000) is a U6_16550A | |
| [ 0.635410] printk: console [ttyS0] enabled | |
| [ 0.635413] printk: bootconsole [uart0] disabled | |
| [ 0.657215] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 27, base_baud = 1500000) is a U6_16550A | |
| [ 0.657405] serial serial0: tty port ttyS1 registered | |
| [ 0.658282] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pd not found, using dummy regulator | |
| [ 0.658363] sun6i-mipi-dsi 1ca0000.dsi: Attached device xbd599 | |
| [ 0.658385] panel-xingbangda-xbd599 1ca0000.dsi.0: [drm:xbd599_probe] 720x1440@60 24bpp dsi 4dl - ready | |
| [ 0.688299] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops) | |
| [ 0.689960] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer_ops) | |
| [ 0.690377] sun4i-drm display-engine: No panel or bridge found... RGB output disabled | |
| [ 0.690395] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_ops) | |
| [ 0.690618] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_ops) | |
| [ 0.690650] sun4i-drm display-engine: bound 1ca0000.dsi (ops sun6i_dsi_ops) | |
| [ 0.690656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [ 0.690658] [drm] No driver support for vblank timestamp query. | |
| [ 0.691124] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1 | |
| [ 1.148961] Console: switching to colour frame buffer device 90x90 | |
| [ 1.191669] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device | |
| [ 1.192536] ehci-platform 1c1b000.usb: EHCI Host Controller | |
| [ 1.192563] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3 | |
| [ 1.192689] ehci-platform 1c1b000.usb: irq 17, io mem 0x01c1b000 | |
| [ 1.205804] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 1.206504] hub 3-0:1.0: USB hub found | |
| [ 1.206540] hub 3-0:1.0: 1 port detected | |
| [ 1.207557] ohci-platform 1c1b400.usb: Generic Platform OHCI controller | |
| [ 1.207580] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4 | |
| [ 1.207704] ohci-platform 1c1b400.usb: irq 18, io mem 0x01c1b400 | |
| [ 1.270485] hub 4-0:1.0: USB hub found | |
| [ 1.270519] hub 4-0:1.0: 1 port detected | |
| [ 1.271621] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator | |
| [ 1.273749] Goodix-TS 0-005d: 0-005d supply VDDIO not found, using dummy regulator | |
| [ 1.375289] Goodix-TS 0-005d: ID 4097, version: 0200 | |
| [ 1.376463] Goodix-TS 0-005d: Direct firmware load for goodix_4097_cfg.bin failed with error -2 | |
| [ 1.376508] random: fast init done | |
| [ 1.378329] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 792000 KHz | |
| [ 1.381565] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 816000 KHz | |
| [ 1.385958] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator | |
| [ 1.386463] sunxi-mmc 1c0f000.mmc: Got CD GPIO | |
| [ 1.401069] input: Goodix Capacitive TouchScreen as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-005d/input/input1 | |
| [ 1.411717] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode | |
| [ 1.412871] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq | |
| [ 1.436527] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode | |
| [ 1.437249] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator | |
| [ 1.448806] mmc0: new high speed SDHC card at address 0001 | |
| [ 1.449895] mmcblk0: mmc0:0001 BB1QT 29.8 GiB | |
| [ 1.451373] mmcblk0: p1 p2 | |
| [ 1.461810] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode | |
| [ 1.463390] sun6i-rtc 1f00000.rtc: setting system clock to 2019-08-23T08:53:31 UTC (1566550411) | |
| [ 1.463656] vcc-wifi: disabling | |
| [ 1.463692] vcc5v0: disabling | |
| [ 1.464339] Freeing unused kernel memory: 960K | |
| [ 1.485855] Run /init as init process | |
| [ 1.527517] mmc2: new DDR MMC card at address 0001 | |
| [ 1.528968] mmcblk2: mmc2:0001 RS016G 14.6 GiB | |
| [ 1.530026] mmcblk2boot0: mmc2:0001 RS016G partition 1 4.00 MiB | |
| [ 1.530988] mmcblk2boot1: mmc2:0001 RS016G partition 2 4.00 MiB | |
| [ 1.532618] mmcblk2: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 > | |
| [ 1.532650] mmcblk2: p1 size 21585920 extends beyond EOD, truncated | |
| [ 1.953887] using random self ethernet address | |
| [ 1.953894] using random host ethernet address | |
| [ 1.963030] usb0: HOST MAC e6:55:67:ee:fb:10 | |
| [ 1.963065] usb0: MAC 02:a8:16:1c:c6:49 | |
| [ 2.143743] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null) | |
| [ 3.725879] random: crng init done | |
| [ 8.650026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) | |
| [ 9.741920] device-mapper: table: 254:0: linear: Device lookup failed | |
| [ 9.741927] device-mapper: ioctl: error adding target to table | |
| [ 9.744288] device-mapper: table: 254:0: linear: Device lookup failed | |
| [ 9.744295] device-mapper: ioctl: error adding target to table | |
| [ 9.796944] device-mapper: table: 254:0: mmcblk2p3 too small for target: start=139263, len=32768, dev_size=2 | |
| [ 9.796952] device-mapper: core: Cannot calculate initial queue limits | |
| [ 9.796954] device-mapper: ioctl: unable to set up device queue for new table. | |
| [ 9.834658] device-mapper: table: 254:0: mmcblk2p3 too small for target: start=1, len=2, dev_size=2 | |
| [ 9.834668] device-mapper: core: Cannot calculate initial queue limits | |
| [ 9.834670] device-mapper: ioctl: unable to set up device queue for new table. | |
| [ 10.245827] udevd[1996]: starting version 3.2.8 | |
| [ 10.332814] udevd[1997]: starting eudev-3.2.8 | |
| [ 10.535984] i2c-gpio i2c-csi: using lines 141 (SDA) and 140 (SCL) | |
| [ 10.782528] input: 1c21800.lradc as /devices/platform/soc/1c21800.lradc/input/input2 | |
| [ 11.342393] input: gpio-vibrator as /devices/platform/vibrator/input/input3 | |
| [ 11.534429] inv-mpu6050-i2c 1-0068: mounting matrix not found: using identity... | |
| [ 11.534487] inv-mpu6050-i2c 1-0068: 1-0068 supply vddio not found, using dummy regulator | |
| [ 11.721087] asoc-simple-card sound: ASoC: codec-analog@1f015c0 not registered | |
| [ 11.732575] i2c i2c-1: Added multiplexed i2c bus 3 | |
| [ 11.733702] asoc-simple-card sound: ASoC: codec-analog@1f015c0 not registered | |
| [ 11.980411] simple-amplifier audio-amplifier: audio-amplifier supply VCC not found, using dummy regulator | |
| [ 11.980517] sun50i-codec-analog 1f015c0.codec-analog: 1f015c0.codec-analog supply cpvdd not found, using dummy regulator | |
| [ 11.982482] asoc-simple-card sound: sun8i <-> 1c22c00.dai mapping ok | |
| [ 12.034548] ov5640 2-003c: ov5640_read_reg: error: reg=300a | |
| [ 12.034557] ov5640 2-003c: ov5640_check_chip_id: failed to read chip identifier | |
| [ 12.506003] Bluetooth: Core ver 2.22 | |
| [ 12.506123] NET: Registered protocol family 31 | |
| [ 12.506126] Bluetooth: HCI device and connection manager initialized | |
| [ 12.506147] Bluetooth: HCI socket layer initialized | |
| [ 12.506154] Bluetooth: L2CAP socket layer initialized | |
| [ 12.506168] Bluetooth: SCO socket layer initialized | |
| [ 12.736170] st-magn-i2c 1-001e: 1-001e supply vddio not found, using dummy regulator | |
| [ 12.739709] iio iio:device3: interrupts active high level | |
| [ 12.739798] NET: Registered protocol family 10 | |
| [ 12.740603] iio iio:device3: registered magnetometer lis3mdl | |
| [ 12.741185] Segment Routing with IPv6 | |
| [ 12.980883] Bluetooth: HCI UART driver ver 2.3 | |
| [ 12.980894] Bluetooth: HCI UART protocol H4 registered | |
| [ 12.980993] Bluetooth: HCI UART protocol LL registered | |
| [ 12.981040] Bluetooth: HCI UART protocol Three-wire (H5) registered | |
| [ 12.981329] Bluetooth: HCI UART protocol Broadcom registered | |
| [ 14.769313] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered | |
| [ 21.852190] elogind-daemon[2568]: Failed to create inotify watch on /dev/null/utmp, ignoring: Not a directory | |
| [ 21.866682] elogind-daemon[2568]: New seat seat0. | |
| [ 21.946431] elogind-daemon[2568]: Watching system buttons on /dev/input/event0 (axp20x-pek) | |
| [ 21.946555] elogind-daemon[2568]: Failed to set utmp path to /dev/null/utmp: Not supported | |
| [ 23.054273] elogind-daemon[2568]: Failed to create inotify watch on /dev/null/utmp, ignoring: Not a directory | |
| [ 23.055717] elogind-daemon[2568]: New session c1 of user demo. | |
| [ 23.065395] elogind-daemon[2568]: Failed to apply ACLs: Not supported | |
| [ 125.120228] elogind-daemon[2568]: Failed to create inotify watch on /dev/null/utmp, ignoring: Not a directory | |
| [ 125.120770] elogind-daemon[2568]: New session c2 of user demo. | |
| [ 191.386272] elogind-daemon[2568]: Power key pressed. | |
| [ 234.400683] elogind-daemon[2568]: Power key pressed. | |
| pine64-pinephone:/sys/devices/platform/display-engine/graphics/fb0# | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2019.04-01010-g97c65687fd (Apr 26 2019 - 23:05:26 +0000) | |
| DRAM: 2048 MiB | |
| Trying to boot from MMC1 | |
| NOTICE: BL31: v2.1(debug):v2.1-109-gc3e4e088 | |
| NOTICE: BL31: Built : 23:03:52, Apr 26 2019 | |
| NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) | |
| NOTICE: BL31: Found U-Boot DTB at 0x40893e0, model: SoPine with baseboard | |
| INFO: ARM GICv2 driver initialized | |
| INFO: Configuring SPC Controller | |
| NOTICE: BL31: PMIC: Detected AXP803 on RSB. | |
| INFO: PMIC: AXP803: dcdc1 voltage: 3.300V | |
| INFO: PMIC: AXP803: dcdc5 voltage: 1.200V | |
| INFO: PMIC: AXP803: dcdc6 voltage: 1.100V | |
| INFO: PMIC: AXP803: dldo1 voltage: 3.300V | |
| INFO: PMIC: AXP803: Enabling DC1SW | |
| INFO: BL31: Platform setup done | |
| INFO: BL31: Initializing runtime services | |
| WARNING: BL31: cortex_a53: CPU workaround for 819472 was missing! | |
| WARNING: BL31: cortex_a53: CPU workaround for 824069 was missing! | |
| WARNING: BL31: cortex_a53: CPU workaround for 827319 was missing! | |
| INFO: BL31: cortex_a53: CPU workaround for 843419 was applied | |
| INFO: BL31: cortex_a53: CPU workaround for 855873 was applied | |
| INFO: BL31: Preparing for EL3 exit to normal world | |
| INFO: Entry point address = 0x4a000000 | |
| INFO: SPSR = 0x3c9 | |
| U-Boot 2019.04-01010-g97c65687fd (Apr 26 2019 - 23:05:26 +0000) UBports | |
| CPU: Allwinner A64 (SUN50I) | |
| Model: SoPine with baseboard | |
| DRAM: 2 GiB | |
| MMC: mmc@1c0f000: 0, mmc@1c11000: 1 | |
| Loading Environment from FAT... Unable to use mmc 1:1... In: serial | |
| Out: serial | |
| Err: serial | |
| Net: phy interface7 | |
| eth0: ethernet@1c30000 | |
| starting USB... | |
| Bus usb@1c1a000: USB EHCI 1.00 | |
| Bus usb@1c1a400: USB OHCI 1.0 | |
| Bus usb@1c1b000: USB EHCI 1.00 | |
| Bus usb@1c1b400: USB OHCI 1.0 | |
| scanning bus usb@1c1a000 for devices... 1 USB Device(s) found | |
| scanning bus usb@1c1a400 for devices... 1 USB Device(s) found | |
| scanning bus usb@1c1b000 for devices... 1 USB Device(s) found | |
| scanning bus usb@1c1b400 for devices... 1 USB Device(s) found | |
| scanning usb for storage devices... 0 Storage Device(s) found | |
| Hit any key to stop autoboot: 0 | |
| switch to partitions #0, OK | |
| mmc0 is current device | |
| Scanning mmc 0:1... | |
| Found U-Boot script /boot/boot.scr | |
| 724 bytes read in 1 ms (707 KiB/s) | |
| ## Executing script at 4fc00000 | |
| 7019705 bytes read in 310 ms (21.6 MiB/s) | |
| Uncompressed size: 15415304 = 0xEB3808 | |
| 29311 bytes read in 8 ms (3.5 MiB/s) | |
| 4588814 bytes read in 202 ms (21.7 MiB/s) | |
| ## Flattened Device Tree blob at 4fa00000 | |
| Booting using the fdt blob at 0x4fa00000 | |
| EHCI failed to shut down host controller. | |
| Loading Ramdisk to 49b9f000, end 49fff50e ... OK | |
| Loading Device Tree to 0000000049b94000, end 0000000049b9e27e ... OK | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 5.3.0-pine64 (root@runner-mUSadhTy-project-11304676-concurrent-0) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #1 SMP Fri Nov 22 11:13:30 UTC 2019 | |
| [ 0.000000] Machine model: PinePhone | |
| [ 0.000000] cma: Reserved 256 MiB at 0x00000000b0000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xafbd4840-0xafbd5fff] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.1 | |
| [ 0.000000] percpu: Embedded 23 pages/cpu s53784 r8192 d32232 u94208 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: ARM erratum 845719 | |
| [ 0.000000] CPU features: detected: ARM erratum 843419 | |
| [ 0.000000] Speculative Store Bypass Disable mitigation not required | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 | |
| [ 0.000000] Policy zone: DMA32 | |
| [ 0.000000] Kernel command line: console=ttyS0,115200 console=tty0 root=PARTUUID=a3b9eaa7-01 rw rootwait | |
| [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] Memory: 1774352K/2097152K available (9726K kernel code, 718K rwdata, 3552K rodata, 1024K init, 388K bss, 60656K reserved, 262144K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x2e4/0x47c with crng_init=0 | |
| [ 0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1 | |
| [ 0.000000] arch_timer: CPU0: Trapping CNTVCT access | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 0.000408] Console: colour dummy device 80x25 | |
| [ 0.000797] printk: console [tty0] enabled | |
| [ 0.000888] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
| [ 0.000913] pid_max: default: 32768 minimum: 301 | |
| [ 0.001016] LSM: Security Framework initializing | |
| [ 0.001059] Yama: becoming mindful. | |
| [ 0.001095] SELinux: Initializing. | |
| [ 0.001157] *** VALIDATE SELinux *** | |
| [ 0.001176] TOMOYO Linux initialized | |
| [ 0.001250] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.001284] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.001889] *** VALIDATE proc *** | |
| [ 0.002145] *** VALIDATE cgroup1 *** | |
| [ 0.002160] *** VALIDATE cgroup2 *** | |
| [ 0.002985] ASID allocator initialised with 32768 entries | |
| [ 0.003087] rcu: Hierarchical SRCU implementation. | |
| [ 0.004445] smp: Bringing up secondary CPUs ... | |
| [ 0.005818] Detected VIPT I-cache on CPU1 | |
| [ 0.005876] arch_timer: CPU1: Trapping CNTVCT access | |
| [ 0.005888] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
| [ 0.006875] Detected VIPT I-cache on CPU2 | |
| [ 0.006906] arch_timer: CPU2: Trapping CNTVCT access | |
| [ 0.006914] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
| [ 0.007839] Detected VIPT I-cache on CPU3 | |
| [ 0.007865] arch_timer: CPU3: Trapping CNTVCT access | |
| [ 0.007873] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
| [ 0.007949] smp: Brought up 1 node, 4 CPUs | |
| [ 0.008035] SMP: Total of 4 processors activated. | |
| [ 0.008048] CPU features: detected: 32-bit EL0 Support | |
| [ 0.008062] CPU features: detected: CRC32 instructions | |
| [ 0.008450] CPU: All CPU(s) started at EL2 | |
| [ 0.008481] alternatives: patching kernel code | |
| [ 0.010679] devtmpfs: initialized | |
| [ 0.017444] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.017492] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.027319] pinctrl core: initialized pinctrl subsystem | |
| [ 0.029011] NET: Registered protocol family 16 | |
| [ 0.029501] audit: initializing netlink subsys (disabled) | |
| [ 0.029646] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.030802] cpuidle: using governor menu | |
| [ 0.031123] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.032474] DMA: preallocated 256 KiB pool for atomic allocations | |
| [ 0.033459] Serial: AMBA PL011 UART driver | |
| [ 0.053896] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.053930] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.053946] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.053961] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.056527] cryptd: max_cpu_qlen set to 1000 | |
| [ 0.062392] SCSI subsystem initialized | |
| [ 0.062817] usbcore: registered new interface driver usbfs | |
| [ 0.062908] usbcore: registered new interface driver hub | |
| [ 0.063000] usbcore: registered new device driver usb | |
| [ 0.063521] mc: Linux media interface: v0.10 | |
| [ 0.063595] videodev: Linux video capture interface: v2.00 | |
| [ 0.063666] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.063680] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.063717] PTP clock support registered | |
| [ 0.063938] EDAC MC: Ver: 3.0.0 | |
| [ 0.065751] NetLabel: Initializing | |
| [ 0.065778] NetLabel: domain hash size = 128 | |
| [ 0.065788] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
| [ 0.065863] NetLabel: unlabeled traffic allowed by default | |
| [ 0.066268] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.066520] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.066594] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.066654] *** VALIDATE hugetlbfs *** | |
| [ 0.075634] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.075639] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.076375] NET: Registered protocol family 2 | |
| [ 0.076995] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) | |
| [ 0.077054] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.077228] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) | |
| [ 0.077589] TCP: Hash tables configured (established 16384 bind 16384) | |
| [ 0.077748] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.077820] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.078023] NET: Registered protocol family 1 | |
| [ 0.079065] RPC: Registered named UNIX socket transport module. | |
| [ 0.079084] RPC: Registered udp transport module. | |
| [ 0.079095] RPC: Registered tcp transport module. | |
| [ 0.079106] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.079351] Unpacking initramfs... | |
| [ 0.359375] Freeing initrd memory: 4480K | |
| [ 0.472881] Initialise system trusted keyrings | |
| [ 0.473056] workingset: timestamp_bits=44 max_order=19 bucket_order=0 | |
| [ 0.482715] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.484392] NFS: Registering the id_resolver key type | |
| [ 0.484444] Key type id_resolver registered | |
| [ 0.484456] Key type id_legacy registered | |
| [ 0.484476] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.484678] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.508969] Key type asymmetric registered | |
| [ 0.509000] Asymmetric key parser 'x509' registered | |
| [ 0.509095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | |
| [ 0.509115] io scheduler mq-deadline registered | |
| [ 0.509127] io scheduler kyber registered | |
| [ 0.509854] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device | |
| [ 0.510908] sun4i-usb-phy 1c19400.phy: failed to get clock usb0_phy | |
| [ 0.511412] sun6i-mipi-dphy 1ca1000.d-phy: Couldn't create the DPHY encoder regmap | |
| [ 0.515311] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver | |
| [ 0.516612] sun50i-a64-r-pinctrl 1f02c00.pinctrl: 1f02c00.pinctrl supply vcc-pl not found, using dummy regulator | |
| [ 0.530191] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.535734] sun6i-mipi-dsi 1ca0000.dsi: Couldn't get VCC-DSI supply | |
| [ 0.538773] lima 1c40000.gpu: bus rate = 200000000 | |
| [ 0.538806] lima 1c40000.gpu: mod rate = 297000000 | |
| [ 0.539095] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 | |
| [ 0.539156] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 | |
| [ 0.539215] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 | |
| [ 0.539266] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus | |
| [ 0.540123] [drm] Initialized lima 1.0.0 20190217 for 1c40000.gpu on minor 0 | |
| [ 0.550116] loop: module loaded | |
| [ 0.552171] libphy: Fixed MDIO Bus: probed | |
| [ 0.552680] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.554707] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.555892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 0.555916] ehci-platform: EHCI generic platform driver | |
| [ 0.556169] ehci-platform 1c1a000.usb: EHCI Host Controller | |
| [ 0.556204] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1 | |
| [ 0.556341] ehci-platform 1c1a000.usb: irq 15, io mem 0x01c1a000 | |
| [ 0.570545] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 0.571448] hub 1-0:1.0: USB hub found | |
| [ 0.571512] hub 1-0:1.0: 1 port detected | |
| [ 0.572302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 0.572351] ohci-platform: OHCI generic platform driver | |
| [ 0.572579] ohci-platform 1c1a400.usb: Generic Platform OHCI controller | |
| [ 0.572613] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2 | |
| [ 0.572774] ohci-platform 1c1a400.usb: irq 16, io mem 0x01c1a400 | |
| [ 0.635128] hub 2-0:1.0: USB hub found | |
| [ 0.635192] hub 2-0:1.0: 1 port detected | |
| [ 0.636451] usbcore: registered new interface driver usb-storage | |
| [ 0.639576] sun6i-rtc 1f00000.rtc: registered as rtc0 | |
| [ 0.639611] sun6i-rtc 1f00000.rtc: RTC enabled | |
| [ 0.639766] i2c /dev entries driver | |
| [ 0.641875] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: [email protected] | |
| [ 0.643099] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.643133] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.643287] Synopsys Designware Multimedia Card Interface Driver | |
| [ 0.644189] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.645131] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.646107] usbcore: registered new interface driver usbhid | |
| [ 0.646130] usbhid: USB HID core driver | |
| [ 0.647884] cedrus 1c0e000.video-codec: Device registered as /dev/video0 | |
| [ 0.649734] Initializing XFRM netlink socket | |
| [ 0.649779] NET: Registered protocol family 17 | |
| [ 0.649806] NET: Registered protocol family 15 | |
| [ 0.650020] 9pnet: Installing 9P2000 support | |
| [ 0.650066] Key type dns_resolver registered | |
| [ 0.650868] registered taskstats version 1 | |
| [ 0.650885] Loading compiled-in X.509 certificates | |
| [ 0.663829] Key type encrypted registered | |
| [ 0.663889] evm: Initialising EVM extended attributes: | |
| [ 0.663901] evm: security.selinux | |
| [ 0.663911] evm: security.SMACK64 | |
| [ 0.663920] evm: security.apparmor | |
| [ 0.663930] evm: security.capability | |
| [ 0.663940] evm: HMAC attrs: 0x1 | |
| [ 0.676606] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz | |
| [ 0.677088] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found | |
| [ 0.679971] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0 | |
| [ 0.681846] axp20x-adc axp813-adc: DMA mask not set | |
| [ 0.682938] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set | |
| [ 0.683181] power_supply axp20x-battery: hwmon: 'axp20x-battery' is not a valid name attribute, please fix | |
| [ 0.683939] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set | |
| [ 0.684109] power_supply axp813-ac: hwmon: 'axp813-ac' is not a valid name attribute, please fix | |
| [ 0.685558] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set | |
| [ 0.685827] power_supply axp20x-usb: hwmon: 'axp20x-usb' is not a valid name attribute, please fix | |
| [ 0.687199] dcdc1: supplied by regulator-dummy | |
| [ 0.687683] dcdc2: supplied by regulator-dummy | |
| [ 0.687982] dcdc4: supplied by regulator-dummy | |
| [ 0.688272] dcdc5: supplied by regulator-dummy | |
| [ 0.688599] dcdc6: supplied by regulator-dummy | |
| [ 0.688874] dc1sw: supplied by regulator-dummy | |
| [ 0.689136] aldo1: supplied by regulator-dummy | |
| [ 0.689224] dovdd-csi: Bringing 3300000uV into 2800000-2800000uV | |
| [ 0.689500] aldo2: supplied by regulator-dummy | |
| [ 0.689804] aldo3: supplied by regulator-dummy | |
| [ 0.690104] dldo1: supplied by regulator-dummy | |
| [ 0.690453] dldo2: supplied by regulator-dummy | |
| [ 0.690568] vcc-mipi-io: Bringing 2900000uV into 3300000-3300000uV | |
| [ 0.690898] dldo3: supplied by regulator-dummy | |
| [ 0.690979] avdd-csi: Bringing 2900000uV into 2800000-2800000uV | |
| [ 0.691247] dldo4: supplied by regulator-dummy | |
| [ 0.691533] eldo1: supplied by regulator-dummy | |
| [ 0.691853] eldo2: supplied by regulator-dummy | |
| [ 0.692148] eldo3: supplied by regulator-dummy | |
| [ 0.692233] dvdd-1v8-csi: Bringing 700000uV into 1800000-1800000uV | |
| [ 0.692501] fldo1: supplied by regulator-dummy | |
| [ 0.692823] fldo2: supplied by regulator-dummy | |
| [ 0.693136] rtc-ldo: supplied by regulator-dummy | |
| [ 0.693413] ldo-io0: supplied by regulator-dummy | |
| [ 0.693523] vcc-lcd: Bringing 3300000uV into 2800000-2800000uV | |
| [ 0.693870] ldo-io1: supplied by regulator-dummy | |
| [ 0.693957] vcc-1v8-typec: Bringing 3300000uV into 1800000-1800000uV | |
| [ 0.694222] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded | |
| [ 0.699866] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver | |
| [ 0.700264] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator | |
| [ 0.700416] pwm-backlight backlight: backlight supply power not found, using dummy regulator | |
| [ 0.714816] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator | |
| [ 0.715384] printk: console [ttyS0] disabled | |
| [ 0.736056] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 26, base_baud = 1500000) is a U6_16550A | |
| [ 2.098841] printk: console [ttyS0] enabled | |
| [ 2.125107] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 27, base_baud = 1500000) is a U6_16550A | |
| [ 2.134269] serial serial0: tty port ttyS1 registered | |
| [ 2.140288] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pd not found, using dummy regulator | |
| [ 2.150396] sun6i-mipi-dsi 1ca0000.dsi: Attached device xbd599 | |
| [ 2.156259] panel-xingbangda-xbd599 1ca0000.dsi.0: [drm:xbd599_probe] 720x1440@60 24bpp dsi 4dl - ready | |
| [ 2.195513] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops) | |
| [ 2.204488] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer_ops) | |
| [ 2.212273] sun4i-drm display-engine: No panel or bridge found... RGB output disabled | |
| [ 2.220129] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_ops) | |
| [ 2.228337] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_ops) | |
| [ 2.236381] sun4i-drm display-engine: bound 1ca0000.dsi (ops sun6i_dsi_ops) | |
| [ 2.243353] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [ 2.249972] [drm] No driver support for vblank timestamp query. | |
| [ 2.256356] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1 | |
| [ 2.761321] Console: switching to colour frame buffer device 90x90 | |
| [ 2.792276] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device | |
| [ 2.800478] ehci-platform 1c1b000.usb: EHCI Host Controller | |
| [ 2.806258] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3 | |
| [ 2.814362] ehci-platform 1c1b000.usb: irq 17, io mem 0x01c1b000 | |
| [ 2.834276] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 2.841316] hub 3-0:1.0: USB hub found | |
| [ 2.845234] hub 3-0:1.0: 1 port detected | |
| [ 2.850358] ohci-platform 1c1b400.usb: Generic Platform OHCI controller | |
| [ 2.857192] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4 | |
| [ 2.865320] ohci-platform 1c1b400.usb: irq 18, io mem 0x01c1b400 | |
| [ 2.935045] hub 4-0:1.0: USB hub found | |
| [ 2.938957] hub 4-0:1.0: 1 port detected | |
| [ 2.944145] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator | |
| [ 2.957437] Goodix-TS 0-005d: 0-005d supply VDDIO not found, using dummy regulator | |
| [ 3.063761] Goodix-TS 0-005d: ID 4097, version: 0200 | |
| [ 3.070090] Goodix-TS 0-005d: Direct firmware load for goodix_4097_cfg.bin failed with error -2 | |
| [ 3.080607] random: fast init done | |
| [ 3.084721] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 792000 KHz | |
| [ 3.097308] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 816000 KHz | |
| [ 3.113096] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator | |
| [ 3.123938] sunxi-mmc 1c0f000.mmc: Got CD GPIO | |
| [ 3.139846] input: Goodix Capacitive TouchScreen as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-005d/input/input1 | |
| [ 3.162805] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode | |
| [ 3.173225] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq | |
| [ 3.201786] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode | |
| [ 3.211695] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator | |
| [ 3.230884] mmc0: new high speed SDHC card at address 0001 | |
| [ 3.237707] mmcblk0: mmc0:0001 BB1QT 29.8 GiB | |
| [ 3.243554] mmcblk0: p1 | |
| [ 3.249336] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode | |
| [ 3.260076] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T00:43:21 UTC (2601) | |
| [ 3.268707] vcc-wifi: disabling | |
| [ 3.271952] vcc5v0: disabling | |
| [ 3.275539] Freeing unused kernel memory: 1024K | |
| [ 3.294328] Run /init as init process | |
| [ 3.324916] mmc2: new DDR MMC card at address 0001 | |
| [ 3.331420] mmcblk2: mmc2:0001 RS016G 14.6 GiB | |
| [ 3.337235] mmcblk2boot0: mmc2:0001 RS016G partition 1 4.00 MiB | |
| [ 3.344402] mmcblk2boot1: mmc2:0001 RS016G partition 2 4.00 MiB | |
| [ 3.346710] random: systemd-udevd: uninitialized urandom read (16 bytes read) | |
| [ 3.349540] random: udevadm: uninitialized urandom read (16 bytes read) | |
| [ 3.349624] random: udevadm: uninitialized urandom read (16 bytes read) | |
| [ 3.352206] mmcblk2: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 > | |
| [ 3.379044] mmcblk2: p1 size 21585920 extends beyond EOD, truncated | |
| [ 4.606479] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) | |
| [ 4.717635] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. | |
| [ 5.163052] init: ureadahead main process (1429) terminated with status 5 | |
| [ 5.341602] random: crng init done | |
| [ 5.353424] random: 7 urandom warning(s) missed due to ratelimiting | |
| [ 7.127367] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 7.158169] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 7.220041] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 7.366203] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 7.413941] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 7.482788] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 8.012304] ov5640 2-003c: ov5640_read_reg: error: reg=300a | |
| [ 8.025939] ov5640 2-003c: ov5640_check_chip_id: failed to read chip identifier | |
| [ 9.239662] systemd-logind[1796]: Failed to start user service, ignoring: Unknown unit: [email protected] | |
| Ubuntu 16.04.6 LTS ubuntu-phablet ttyS0 | |
| ubuntu-phablet login: [ 32.440153] systemd-timedated[3443]: Assertion 'path' failed at ../src/basic/path-util.c:354, function path_startswith(). Aborting. | |
| Ubuntu 16.04.6 LTS ubuntu-phablet ttyS0 | |
| ubuntu-phablet login: ubuntu | |
| Password: | |
| Login incorrect | |
| ubuntu-phablet login: ubuntu | |
| Password: | |
| Login incorrect | |
| ubuntu-phablet login: | |
| Login timed out | |
| Ubuntu 16.04.6 LTS ubuntu-phablet ttyS0 | |
| ubuntu-phablet login: phablet | |
| Password: | |
| Welcome to Ubuntu 16.04.6 LTS (GNU/Linux 5.3.0-pine64 aarch64) | |
| * Documentation: https://help.ubuntu.com | |
| * Management: https://landscape.canonical.com | |
| * Support: https://ubuntu.com/advantage | |
| The programs included with the Ubuntu system are free software; | |
| the exact distribution terms for each program are described in the | |
| individual files in /usr/share/doc/*/copyright. | |
| Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by | |
| applicable law. | |
| To run a command as administrator (user "root"), use "sudo <command>". | |
| See "man sudo_root" for details. | |
| phablet@ubuntu-phablet:~$ sudo -s | |
| [sudo] password for phablet: | |
| root@ubuntu-phablet:~# dmesg | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] | |
| [ 0.000000] Linux version 5.3.0-pine64 (root@runner-mUSadhTy-project-11304676-concurrent-0) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #1 SMP Fri Nov 22 11:13:30 UTC 2019 | |
| [ 0.000000] Machine model: PinePhone | |
| [ 0.000000] cma: Reserved 256 MiB at 0x00000000b0000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0xafbd4840-0xafbd5fff] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] Normal empty | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] | |
| [ 0.000000] On node 0 totalpages: 524288 | |
| [ 0.000000] DMA32 zone: 8192 pages used for memmap | |
| [ 0.000000] DMA32 zone: 0 pages reserved | |
| [ 0.000000] DMA32 zone: 524288 pages, LIFO batch:63 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.1 | |
| [ 0.000000] percpu: Embedded 23 pages/cpu s53784 r8192 d32232 u94208 | |
| [ 0.000000] pcpu-alloc: s53784 r8192 d32232 u94208 alloc=23*4096 | |
| [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
| [ 0.000000] Detected VIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: ARM erratum 845719 | |
| [ 0.000000] CPU features: detected: ARM erratum 843419 | |
| [ 0.000000] Speculative Store Bypass Disable mitigation not required | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 | |
| [ 0.000000] Policy zone: DMA32 | |
| [ 0.000000] Kernel command line: console=ttyS0,115200 console=tty0 root=PARTUUID=a3b9eaa7-01 rw rootwait | |
| [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] Memory: 1774352K/2097152K available (9726K kernel code, 718K rwdata, 3552K rodata, 1024K init, 388K bss, 60656K reserved, 262144K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x2e4/0x47c with crng_init=0 | |
| [ 0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1 | |
| [ 0.000000] arch_timer: CPU0: Trapping CNTVCT access | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | |
| [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | |
| [ 0.000408] Console: colour dummy device 80x25 | |
| [ 0.000797] printk: console [tty0] enabled | |
| [ 0.000888] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) | |
| [ 0.000913] pid_max: default: 32768 minimum: 301 | |
| [ 0.001016] LSM: Security Framework initializing | |
| [ 0.001059] Yama: becoming mindful. | |
| [ 0.001095] SELinux: Initializing. | |
| [ 0.001157] *** VALIDATE SELinux *** | |
| [ 0.001176] TOMOYO Linux initialized | |
| [ 0.001250] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.001284] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
| [ 0.001889] *** VALIDATE proc *** | |
| [ 0.002145] *** VALIDATE cgroup1 *** | |
| [ 0.002160] *** VALIDATE cgroup2 *** | |
| [ 0.002985] ASID allocator initialised with 32768 entries | |
| [ 0.003087] rcu: Hierarchical SRCU implementation. | |
| [ 0.004445] smp: Bringing up secondary CPUs ... | |
| [ 0.005818] Detected VIPT I-cache on CPU1 | |
| [ 0.005876] arch_timer: CPU1: Trapping CNTVCT access | |
| [ 0.005888] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] | |
| [ 0.006875] Detected VIPT I-cache on CPU2 | |
| [ 0.006906] arch_timer: CPU2: Trapping CNTVCT access | |
| [ 0.006914] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] | |
| [ 0.007839] Detected VIPT I-cache on CPU3 | |
| [ 0.007865] arch_timer: CPU3: Trapping CNTVCT access | |
| [ 0.007873] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] | |
| [ 0.007949] smp: Brought up 1 node, 4 CPUs | |
| [ 0.008035] SMP: Total of 4 processors activated. | |
| [ 0.008048] CPU features: detected: 32-bit EL0 Support | |
| [ 0.008062] CPU features: detected: CRC32 instructions | |
| [ 0.008450] CPU: All CPU(s) started at EL2 | |
| [ 0.008481] alternatives: patching kernel code | |
| [ 0.010679] devtmpfs: initialized | |
| [ 0.017444] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.017492] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.027319] pinctrl core: initialized pinctrl subsystem | |
| [ 0.029011] NET: Registered protocol family 16 | |
| [ 0.029501] audit: initializing netlink subsys (disabled) | |
| [ 0.029646] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.030802] cpuidle: using governor menu | |
| [ 0.031123] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.032474] DMA: preallocated 256 KiB pool for atomic allocations | |
| [ 0.033459] Serial: AMBA PL011 UART driver | |
| [ 0.053896] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.053930] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.053946] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.053961] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.056527] cryptd: max_cpu_qlen set to 1000 | |
| [ 0.062392] SCSI subsystem initialized | |
| [ 0.062817] usbcore: registered new interface driver usbfs | |
| [ 0.062908] usbcore: registered new interface driver hub | |
| [ 0.063000] usbcore: registered new device driver usb | |
| [ 0.063521] mc: Linux media interface: v0.10 | |
| [ 0.063595] videodev: Linux video capture interface: v2.00 | |
| [ 0.063666] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.063680] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.063717] PTP clock support registered | |
| [ 0.063938] EDAC MC: Ver: 3.0.0 | |
| [ 0.065751] NetLabel: Initializing | |
| [ 0.065778] NetLabel: domain hash size = 128 | |
| [ 0.065788] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
| [ 0.065863] NetLabel: unlabeled traffic allowed by default | |
| [ 0.066268] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.066520] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.066594] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.066654] *** VALIDATE hugetlbfs *** | |
| [ 0.075634] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.075639] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.076375] NET: Registered protocol family 2 | |
| [ 0.076995] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) | |
| [ 0.077054] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.077228] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) | |
| [ 0.077589] TCP: Hash tables configured (established 16384 bind 16384) | |
| [ 0.077748] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.077820] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) | |
| [ 0.078023] NET: Registered protocol family 1 | |
| [ 0.079065] RPC: Registered named UNIX socket transport module. | |
| [ 0.079084] RPC: Registered udp transport module. | |
| [ 0.079095] RPC: Registered tcp transport module. | |
| [ 0.079106] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.079351] Unpacking initramfs... | |
| [ 0.359375] Freeing initrd memory: 4480K | |
| [ 0.472881] Initialise system trusted keyrings | |
| [ 0.473056] workingset: timestamp_bits=44 max_order=19 bucket_order=0 | |
| [ 0.482715] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.484392] NFS: Registering the id_resolver key type | |
| [ 0.484444] Key type id_resolver registered | |
| [ 0.484456] Key type id_legacy registered | |
| [ 0.484476] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.484678] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.508969] Key type asymmetric registered | |
| [ 0.509000] Asymmetric key parser 'x509' registered | |
| [ 0.509095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | |
| [ 0.509115] io scheduler mq-deadline registered | |
| [ 0.509127] io scheduler kyber registered | |
| [ 0.509854] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device | |
| [ 0.510908] sun4i-usb-phy 1c19400.phy: failed to get clock usb0_phy | |
| [ 0.511412] sun6i-mipi-dphy 1ca1000.d-phy: Couldn't create the DPHY encoder regmap | |
| [ 0.515311] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver | |
| [ 0.516612] sun50i-a64-r-pinctrl 1f02c00.pinctrl: 1f02c00.pinctrl supply vcc-pl not found, using dummy regulator | |
| [ 0.530191] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.535734] sun6i-mipi-dsi 1ca0000.dsi: Couldn't get VCC-DSI supply | |
| [ 0.538773] lima 1c40000.gpu: bus rate = 200000000 | |
| [ 0.538806] lima 1c40000.gpu: mod rate = 297000000 | |
| [ 0.539095] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 | |
| [ 0.539156] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 | |
| [ 0.539215] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 | |
| [ 0.539266] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus | |
| [ 0.540123] [drm] Initialized lima 1.0.0 20190217 for 1c40000.gpu on minor 0 | |
| [ 0.550116] loop: module loaded | |
| [ 0.552171] libphy: Fixed MDIO Bus: probed | |
| [ 0.552680] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.554707] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.555892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 0.555916] ehci-platform: EHCI generic platform driver | |
| [ 0.556169] ehci-platform 1c1a000.usb: EHCI Host Controller | |
| [ 0.556204] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1 | |
| [ 0.556341] ehci-platform 1c1a000.usb: irq 15, io mem 0x01c1a000 | |
| [ 0.570545] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 0.571448] hub 1-0:1.0: USB hub found | |
| [ 0.571512] hub 1-0:1.0: 1 port detected | |
| [ 0.572302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| [ 0.572351] ohci-platform: OHCI generic platform driver | |
| [ 0.572579] ohci-platform 1c1a400.usb: Generic Platform OHCI controller | |
| [ 0.572613] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2 | |
| [ 0.572774] ohci-platform 1c1a400.usb: irq 16, io mem 0x01c1a400 | |
| [ 0.635128] hub 2-0:1.0: USB hub found | |
| [ 0.635192] hub 2-0:1.0: 1 port detected | |
| [ 0.636451] usbcore: registered new interface driver usb-storage | |
| [ 0.639576] sun6i-rtc 1f00000.rtc: registered as rtc0 | |
| [ 0.639611] sun6i-rtc 1f00000.rtc: RTC enabled | |
| [ 0.639766] i2c /dev entries driver | |
| [ 0.641875] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: [email protected] | |
| [ 0.643099] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.643133] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.643287] Synopsys Designware Multimedia Card Interface Driver | |
| [ 0.644189] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.645131] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.646107] usbcore: registered new interface driver usbhid | |
| [ 0.646130] usbhid: USB HID core driver | |
| [ 0.647884] cedrus 1c0e000.video-codec: Device registered as /dev/video0 | |
| [ 0.649734] Initializing XFRM netlink socket | |
| [ 0.649779] NET: Registered protocol family 17 | |
| [ 0.649806] NET: Registered protocol family 15 | |
| [ 0.650020] 9pnet: Installing 9P2000 support | |
| [ 0.650066] Key type dns_resolver registered | |
| [ 0.650868] registered taskstats version 1 | |
| [ 0.650885] Loading compiled-in X.509 certificates | |
| [ 0.663829] Key type encrypted registered | |
| [ 0.663889] evm: Initialising EVM extended attributes: | |
| [ 0.663901] evm: security.selinux | |
| [ 0.663911] evm: security.SMACK64 | |
| [ 0.663920] evm: security.apparmor | |
| [ 0.663930] evm: security.capability | |
| [ 0.663940] evm: HMAC attrs: 0x1 | |
| [ 0.676606] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz | |
| [ 0.677088] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found | |
| [ 0.679971] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0 | |
| [ 0.681846] axp20x-adc axp813-adc: DMA mask not set | |
| [ 0.682938] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set | |
| [ 0.683181] power_supply axp20x-battery: hwmon: 'axp20x-battery' is not a valid name attribute, please fix | |
| [ 0.683939] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set | |
| [ 0.684109] power_supply axp813-ac: hwmon: 'axp813-ac' is not a valid name attribute, please fix | |
| [ 0.685558] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set | |
| [ 0.685827] power_supply axp20x-usb: hwmon: 'axp20x-usb' is not a valid name attribute, please fix | |
| [ 0.687199] dcdc1: supplied by regulator-dummy | |
| [ 0.687683] dcdc2: supplied by regulator-dummy | |
| [ 0.687982] dcdc4: supplied by regulator-dummy | |
| [ 0.688272] dcdc5: supplied by regulator-dummy | |
| [ 0.688599] dcdc6: supplied by regulator-dummy | |
| [ 0.688874] dc1sw: supplied by regulator-dummy | |
| [ 0.689136] aldo1: supplied by regulator-dummy | |
| [ 0.689224] dovdd-csi: Bringing 3300000uV into 2800000-2800000uV | |
| [ 0.689500] aldo2: supplied by regulator-dummy | |
| [ 0.689804] aldo3: supplied by regulator-dummy | |
| [ 0.690104] dldo1: supplied by regulator-dummy | |
| [ 0.690453] dldo2: supplied by regulator-dummy | |
| [ 0.690568] vcc-mipi-io: Bringing 2900000uV into 3300000-3300000uV | |
| [ 0.690898] dldo3: supplied by regulator-dummy | |
| [ 0.690979] avdd-csi: Bringing 2900000uV into 2800000-2800000uV | |
| [ 0.691247] dldo4: supplied by regulator-dummy | |
| [ 0.691533] eldo1: supplied by regulator-dummy | |
| [ 0.691853] eldo2: supplied by regulator-dummy | |
| [ 0.692148] eldo3: supplied by regulator-dummy | |
| [ 0.692233] dvdd-1v8-csi: Bringing 700000uV into 1800000-1800000uV | |
| [ 0.692501] fldo1: supplied by regulator-dummy | |
| [ 0.692823] fldo2: supplied by regulator-dummy | |
| [ 0.693136] rtc-ldo: supplied by regulator-dummy | |
| [ 0.693413] ldo-io0: supplied by regulator-dummy | |
| [ 0.693523] vcc-lcd: Bringing 3300000uV into 2800000-2800000uV | |
| [ 0.693870] ldo-io1: supplied by regulator-dummy | |
| [ 0.693957] vcc-1v8-typec: Bringing 3300000uV into 1800000-1800000uV | |
| [ 0.694222] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded | |
| [ 0.699866] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver | |
| [ 0.700264] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator | |
| [ 0.700416] pwm-backlight backlight: backlight supply power not found, using dummy regulator | |
| [ 0.714816] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator | |
| [ 0.715384] printk: console [ttyS0] disabled | |
| [ 0.736056] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 26, base_baud = 1500000) is a U6_16550A | |
| [ 2.098841] printk: console [ttyS0] enabled | |
| [ 2.125107] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 27, base_baud = 1500000) is a U6_16550A | |
| [ 2.134269] serial serial0: tty port ttyS1 registered | |
| [ 2.140288] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pd not found, using dummy regulator | |
| [ 2.150396] sun6i-mipi-dsi 1ca0000.dsi: Attached device xbd599 | |
| [ 2.156259] panel-xingbangda-xbd599 1ca0000.dsi.0: [drm:xbd599_probe] 720x1440@60 24bpp dsi 4dl - ready | |
| [ 2.195513] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops) | |
| [ 2.204488] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer_ops) | |
| [ 2.212273] sun4i-drm display-engine: No panel or bridge found... RGB output disabled | |
| [ 2.220129] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_ops) | |
| [ 2.228337] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_ops) | |
| [ 2.236381] sun4i-drm display-engine: bound 1ca0000.dsi (ops sun6i_dsi_ops) | |
| [ 2.243353] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [ 2.249972] [drm] No driver support for vblank timestamp query. | |
| [ 2.256356] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1 | |
| [ 2.761321] Console: switching to colour frame buffer device 90x90 | |
| [ 2.792276] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device | |
| [ 2.800478] ehci-platform 1c1b000.usb: EHCI Host Controller | |
| [ 2.806258] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3 | |
| [ 2.814362] ehci-platform 1c1b000.usb: irq 17, io mem 0x01c1b000 | |
| [ 2.834276] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 | |
| [ 2.841316] hub 3-0:1.0: USB hub found | |
| [ 2.845234] hub 3-0:1.0: 1 port detected | |
| [ 2.850358] ohci-platform 1c1b400.usb: Generic Platform OHCI controller | |
| [ 2.857192] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4 | |
| [ 2.865320] ohci-platform 1c1b400.usb: irq 18, io mem 0x01c1b400 | |
| [ 2.935045] hub 4-0:1.0: USB hub found | |
| [ 2.938957] hub 4-0:1.0: 1 port detected | |
| [ 2.944145] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator | |
| [ 2.957437] Goodix-TS 0-005d: 0-005d supply VDDIO not found, using dummy regulator | |
| [ 3.063761] Goodix-TS 0-005d: ID 4097, version: 0200 | |
| [ 3.070090] Goodix-TS 0-005d: Direct firmware load for goodix_4097_cfg.bin failed with error -2 | |
| [ 3.080607] random: fast init done | |
| [ 3.084721] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 792000 KHz | |
| [ 3.097308] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 816000 KHz | |
| [ 3.113096] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator | |
| [ 3.123938] sunxi-mmc 1c0f000.mmc: Got CD GPIO | |
| [ 3.139846] input: Goodix Capacitive TouchScreen as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-005d/input/input1 | |
| [ 3.162805] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode | |
| [ 3.173225] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq | |
| [ 3.201786] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode | |
| [ 3.211695] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator | |
| [ 3.230884] mmc0: new high speed SDHC card at address 0001 | |
| [ 3.237707] mmcblk0: mmc0:0001 BB1QT 29.8 GiB | |
| [ 3.243554] mmcblk0: p1 | |
| [ 3.249336] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode | |
| [ 3.260076] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T00:43:21 UTC (2601) | |
| [ 3.268707] vcc-wifi: disabling | |
| [ 3.271952] vcc5v0: disabling | |
| [ 3.275539] Freeing unused kernel memory: 1024K | |
| [ 3.294328] Run /init as init process | |
| [ 3.324916] mmc2: new DDR MMC card at address 0001 | |
| [ 3.331420] mmcblk2: mmc2:0001 RS016G 14.6 GiB | |
| [ 3.337235] mmcblk2boot0: mmc2:0001 RS016G partition 1 4.00 MiB | |
| [ 3.344402] mmcblk2boot1: mmc2:0001 RS016G partition 2 4.00 MiB | |
| [ 3.346710] random: systemd-udevd: uninitialized urandom read (16 bytes read) | |
| [ 3.349540] random: udevadm: uninitialized urandom read (16 bytes read) | |
| [ 3.349624] random: udevadm: uninitialized urandom read (16 bytes read) | |
| [ 3.352206] mmcblk2: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 > | |
| [ 3.379044] mmcblk2: p1 size 21585920 extends beyond EOD, truncated | |
| [ 4.606479] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) | |
| [ 4.717635] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. | |
| [ 5.163052] init: ureadahead main process (1429) terminated with status 5 | |
| [ 5.341602] random: crng init done | |
| [ 5.353424] random: 7 urandom warning(s) missed due to ratelimiting | |
| [ 6.371065] i2c-gpio i2c-csi: using lines 141 (SDA) and 140 (SCL) | |
| [ 6.822110] input: 1c21800.lradc as /devices/platform/soc/1c21800.lradc/input/input2 | |
| [ 7.127367] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 7.158169] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 7.220041] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 7.264009] inv-mpu6050-i2c 1-0068: mounting matrix not found: using identity... | |
| [ 7.264075] inv-mpu6050-i2c 1-0068: 1-0068 supply vddio not found, using dummy regulator | |
| [ 7.322492] Bluetooth: Core ver 2.22 | |
| [ 7.322618] NET: Registered protocol family 31 | |
| [ 7.322621] Bluetooth: HCI device and connection manager initialized | |
| [ 7.322646] Bluetooth: HCI socket layer initialized | |
| [ 7.322655] Bluetooth: L2CAP socket layer initialized | |
| [ 7.322684] Bluetooth: SCO socket layer initialized | |
| [ 7.332245] st-magn-i2c 1-001e: 1-001e supply vddio not found, using dummy regulator | |
| [ 7.358636] iio iio:device3: interrupts active high level | |
| [ 7.364812] iio iio:device3: registered magnetometer lis3mdl | |
| [ 7.366203] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 7.410959] input: gpio-vibrator as /devices/platform/vibrator/input/input3 | |
| [ 7.413941] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 7.480846] i2c i2c-1: Added multiplexed i2c bus 3 | |
| [ 7.482788] asoc-simple-card sound: ASoC: audio-amplifier not registered | |
| [ 8.012304] ov5640 2-003c: ov5640_read_reg: error: reg=300a | |
| [ 8.025939] ov5640 2-003c: ov5640_check_chip_id: failed to read chip identifier | |
| [ 8.249294] systemd-logind[1796]: New seat seat0. | |
| [ 8.484542] init: ubuntu-location-service main process (1649) killed by SEGV signal | |
| [ 8.484610] init: ubuntu-location-service main process ended, respawning | |
| [ 8.568974] init: failsafe main process (1819) killed by TERM signal | |
| [ 8.649513] init: ubuntu-location-service main process (1884) killed by SEGV signal | |
| [ 8.649577] init: ubuntu-location-service main process ended, respawning | |
| [ 8.733124] NET: Registered protocol family 10 | |
| [ 8.734604] Segment Routing with IPv6 | |
| [ 8.812908] init: ubuntu-location-service main process (1925) killed by SEGV signal | |
| [ 8.812978] init: ubuntu-location-service main process ended, respawning | |
| [ 8.953799] init: ubuntu-location-service main process (1948) killed by SEGV signal | |
| [ 8.953869] init: ubuntu-location-service main process ended, respawning | |
| [ 9.099871] init: ubuntu-location-service main process (1971) killed by SEGV signal | |
| [ 9.099952] init: ubuntu-location-service main process ended, respawning | |
| [ 9.239662] systemd-logind[1796]: Failed to start user service, ignoring: Unknown unit: [email protected] | |
| [ 9.244981] init: ubuntu-location-service main process (1994) killed by SEGV signal | |
| [ 9.265834] init: ubuntu-location-service main process ended, respawning | |
| [ 9.323913] systemd-logind[1796]: New session c1 of user phablet. | |
| [ 9.418647] init: ubuntu-location-service main process (2022) killed by SEGV signal | |
| [ 9.418737] init: ubuntu-location-service main process ended, respawning | |
| [ 9.558840] init: ubuntu-location-service main process (2049) killed by SEGV signal | |
| [ 9.558908] init: ubuntu-location-service main process ended, respawning | |
| [ 9.700975] init: ubuntu-location-service main process (2081) killed by SEGV signal | |
| [ 9.701120] init: ubuntu-location-service main process ended, respawning | |
| [ 9.836702] init: ubuntu-location-service main process (2114) killed by SEGV signal | |
| [ 9.836769] init: ubuntu-location-service main process ended, respawning | |
| [ 9.963978] init: ubuntu-location-service main process (2129) killed by SEGV signal | |
| [ 9.964051] init: ubuntu-location-service respawning too fast, stopped | |
| [ 10.000815] init: system-watchdog main process (2160) terminated with status 1 | |
| [ 11.025754] init: isc-dhcp-server main process (2337) terminated with status 1 | |
| [ 11.025825] init: isc-dhcp-server main process ended, respawning | |
| [ 11.426191] init: isc-dhcp-server main process (2397) terminated with status 1 | |
| [ 11.426322] init: isc-dhcp-server main process ended, respawning | |
| [ 11.706612] init: isc-dhcp-server main process (2428) terminated with status 1 | |
| [ 11.706684] init: isc-dhcp-server main process ended, respawning | |
| [ 12.002562] init: isc-dhcp-server main process (2471) terminated with status 1 | |
| [ 12.002625] init: isc-dhcp-server main process ended, respawning | |
| [ 12.278502] init: isc-dhcp-server main process (2499) terminated with status 1 | |
| [ 12.278579] init: isc-dhcp-server main process ended, respawning | |
| [ 12.519486] init: isc-dhcp-server main process (2528) terminated with status 1 | |
| [ 12.519551] init: isc-dhcp-server main process ended, respawning | |
| [ 12.868992] init: isc-dhcp-server main process (2566) terminated with status 1 | |
| [ 12.869052] init: isc-dhcp-server main process ended, respawning | |
| [ 13.076153] init: isc-dhcp-server main process (2578) terminated with status 1 | |
| [ 13.076225] init: isc-dhcp-server main process ended, respawning | |
| [ 13.329016] init: isc-dhcp-server main process (2591) terminated with status 1 | |
| [ 13.329100] init: isc-dhcp-server main process ended, respawning | |
| [ 13.571828] init: isc-dhcp-server main process (2611) terminated with status 1 | |
| [ 13.571903] init: isc-dhcp-server main process ended, respawning | |
| [ 13.750884] init: isc-dhcp-server main process (2628) terminated with status 1 | |
| [ 13.750983] init: isc-dhcp-server respawning too fast, stopped | |
| [ 13.791224] init: system-watchdog main process (2641) terminated with status 1 | |
| [ 32.440153] systemd-timedated[3443]: Assertion 'path' failed at ../src/basic/path-util.c:354, function path_startswith(). Aborting. | |
| [ 36.392648] FAT-fs (mmcblk2p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [ 129.213556] init: ttyS0 main process ended, respawning | |
| [ 224.255840] systemd-logind[1796]: New session 1 of user phablet. | |
| root@ubuntu-phablet:~# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment