Created
May 25, 2015 01:19
-
-
Save kangear/b3599109fc56dbe62ea9 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
<6>[ 0.000000] Initializing cgroup subsys cpu | |
<5>[ 0.000000] Linux version 3.0.36+ (ybk@v-stone-hwubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #149 SMP PREEMPT Wed May 6 10:24:20 CST 2015 | |
<4>[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d | |
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
<4>[ 0.000000] Machine: RK30board | |
<6>[ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion> | |
<6>[ 0.000000] memory reserve: Memory(base:0x90b00000 size:13M) reserved for <fb0 buf> | |
<6>[ 0.000000] memory reserve: Memory(base:0x90500000 size:6M) reserved for <camera_ipp_mem> | |
<6>[ 0.000000] memory reserve: Total reserved 99M | |
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback | |
<6>[ 0.000000] bootconsole [earlycon0] enabled | |
<4>[ 0.000000] CPU SRAM: copied sram code from c0aed000 to fef00100 - fef02158 | |
<4>[ 0.000000] CPU SRAM: copied sram data from c0aef058 to fef02158 - fef028d0 | |
<4>[ 0.000000] sram_log: 4q ?& : 4q ?) !?, # 0q *! ! 3q @ 3q | |
<4>[ 0.000000] CLKDATA_MSG: pll_flag = 0x00 | |
<6>[ 0.000000] L310 cache controller enabled | |
<6>[ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B | |
<4>[ 0.000000] DDR DEBUG: version 1.00 20131106 | |
<4>[ 0.000000] DDR DEBUG: DDR3 Device | |
<4>[ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Total Capability=2048MB | |
<4>[ 0.000000] DDR DEBUG: init success!!! freq=300MHz | |
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360 | |
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360 | |
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360 | |
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360 | |
<4>[ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0 | |
<4>[ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb | |
<4>[ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2 | |
<7>[ 0.000000] On node 0 totalpages: 498944 | |
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0aea940, node_mem_map c2140000 | |
<7>[ 0.000000] Normal zone: 1744 pages used for memmap | |
<7>[ 0.000000] Normal zone: 0 pages reserved | |
<7>[ 0.000000] Normal zone: 196144 pages, LIFO batch:31 | |
<7>[ 0.000000] HighMem zone: 2352 pages used for memmap | |
<7>[ 0.000000] HighMem zone: 298704 pages, LIFO batch:31 | |
<6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c314f000 s6976 r8192 d13504 u32768 | |
<7>[ 0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096 | |
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 494848 | |
<5>[ 0.000000] Kernel command line: board.ap_has_alsa=0 console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00140000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00002000@0x00280000(kpanic),0x00200000@0x00282000(system),-@0x00482000(userdata) bootver=2013-11-21#1.28 firmware_ver=4.1.1 | |
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) | |
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
<6>[ 0.000000] Memory: 773MB 1176MB = 1949MB total | |
<5>[ 0.000000] Memory: 1959128k/1959128k available, 138024k reserved, 1204224K highmem | |
<5>[ 0.000000] Virtual kernel memory layout: | |
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
<5>[ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB) | |
<5>[ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB) | |
<5>[ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB) | |
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
<5>[ 0.000000] .init : 0xc0408000 - 0xc0433000 ( 172 kB) | |
<5>[ 0.000000] .text : 0xc0433000 - 0xc0a81b94 (6459 kB) | |
<5>[ 0.000000] .data : 0xc0a82000 - 0xc0aec7a8 ( 426 kB) | |
<5>[ 0.000000] .bss : 0xc0af0024 - 0xc1594ad8 (10899 kB) | |
<6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
<6>[ 0.000000] Preemptible hierarchical RCU implementation. | |
<6>[ 0.000000] NR_IRQS:352 | |
<4>[ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks | |
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms | |
<4>[ 0.000000] rk_timer: version 1.2 | |
<6>[ 0.003755] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341) | |
<6>[ 0.012925] pid_max: default: 32768 minimum: 301 | |
<6>[ 0.018255] Mount-cache hash table entries: 512 | |
<6>[ 0.023812] Initializing cgroup subsys debug | |
<6>[ 0.028592] Initializing cgroup subsys cpuacct | |
<6>[ 0.033582] Initializing cgroup subsys freezer | |
<6>[ 0.038566] CPU: Testing write buffer coherency: ok | |
<4>[ 0.124817] CPU1: Booted secondary processor | |
<4>[ 0.164806] CPU2: Booted secondary processor | |
<4>[ 0.204805] CPU3: Booted secondary processor | |
<6>[ 0.204835] Brought up 4 CPUs | |
<6>[ 0.222498] SMP: Total of 4 processors activated (6525.87 BogoMIPS). | |
<6>[ 0.229881] devtmpfs: initialized | |
<6>[ 0.239354] NET: Registered protocol family 16 | |
<6>[ 0.244431] last_log: 0xf0100000 map to 0xf7004000 and copy to 0xc0af4180 (version 2.1) | |
<4>[ 0.267747] DVFS MSG: AVS Value(index=0): 182 181 181 181 183 182 182 182 181 181 | |
<6>[ 0.287112] lcdc0 is used as external display device contoller! | |
<6>[ 0.293727] lcdc1 is used as primary display device controller! | |
<6>[ 0.400587] rk29sdk_wifi_bt_gpio_control_init: init finished | |
<6>[ 0.408186] console [ttyFIQ0] enabled, bootconsole disabled | |
<6>[ 0.417337] Registered FIQ tty driver f0035cc0 | |
<6>[ 0.417880] Loaded driver for PL330 DMAC-1 rk29-pl330 | |
<6>[ 0.417921] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 | |
<6>[ 0.418107] Loaded driver for PL330 DMAC-2 rk29-pl330 | |
<6>[ 0.418146] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 | |
<6>[ 0.450013] bio: create slab <bio-0> at 0 | |
<5>[ 0.454428] SCSI subsystem initialized | |
<6>[ 0.454626] usbcore: registered new interface driver usbfs | |
<6>[ 0.454735] usbcore: registered new interface driver hub | |
<6>[ 0.469000] usbcore: registered new device driver usb | |
<6>[ 0.469245] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter | |
<6>[ 0.469481] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter | |
<6>[ 0.469614] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter | |
<6>[ 0.469754] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter | |
<6>[ 0.470036] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter | |
<6>[ 0.500582] rk30-adc rk30-adc: rk30 adc: driver initialized | |
<4>[ 0.500809] timed-gpio: probe of timed-gpio failed with error -22 | |
<6>[ 0.500928] Advanced Linux Sound Architecture Driver Version 1.0.24. | |
<6>[ 0.501355] Bluetooth: Core ver 2.16 | |
<6>[ 0.501420] NET: Registered protocol family 31 | |
<6>[ 0.501454] Bluetooth: HCI device and connection manager initialized | |
<6>[ 0.501502] Bluetooth: HCI socket layer initialized | |
<6>[ 0.501539] Bluetooth: L2CAP socket layer initialized | |
<6>[ 0.501589] Bluetooth: SCO socket layer initialized | |
<4>[ 0.502614] rk fb probe ok! | |
<4>[ 0.507455] act8846_set_init,line=20 | |
<4>[ 0.507486] act8846_set_init:g_pmic_type=3 | |
<4>[ 0.509270] act8846_set_init nor_mode:act_dcdc1 =1200000mV end | |
<4>[ 0.511150] act8846_set_init nor_mode:vdd_core =1000000mV end | |
<4>[ 0.513025] act8846_set_init nor_mode:vdd_cpu =1000000mV end | |
<4>[ 0.514904] act8846_set_init nor_mode:act_dcdc4 =3300000mV end | |
<4>[ 0.516151] act8846_set_init act_ldo1 =1000000mV end | |
<4>[ 0.517922] act8846_set_init act_ldo2 =1200000mV end | |
<4>[ 0.518598] ------------[ cut here ]------------ | |
<4>[ 0.518649] WARNING: at drivers/regulator/core.c:1406 _regulator_disable+0x128/0x250() | |
<4>[ 0.518704] unbalanced disables for ACT_LDO3 | |
<4>[ 0.518761] [<c043e3b0>] (unwind_backtrace+0x0/0xf8) from [<c046f45c>] (warn_slowpath_common+0x4c/0x64) | |
<4>[ 0.518833] [<c046f45c>] (warn_slowpath_common+0x4c/0x64) from [<c046f508>] (warn_slowpath_fmt+0x30/0x40) | |
<4>[ 0.518907] [<c046f508>] (warn_slowpath_fmt+0x30/0x40) from [<c06244e8>] (_regulator_disable+0x128/0x250) | |
<4>[ 0.518982] [<c06244e8>] (_regulator_disable+0x128/0x250) from [<c0624640>] (regulator_disable+0x30/0x70) | |
<4>[ 0.519057] [<c0624640>] (regulator_disable+0x30/0x70) from [<c0450114>] (act8846_set_init+0x19c/0x2a8) | |
<4>[ 0.519136] [<c0450114>] (act8846_set_init+0x19c/0x2a8) from [<c08e5824>] (act8846_i2c_probe+0x150/0x1a4) | |
<4>[ 0.519217] [<c08e5824>] (act8846_i2c_probe+0x150/0x1a4) from [<c06cb77c>] (i2c_device_probe+0xc0/0xfc) | |
<4>[ 0.519292] [<c06cb77c>] (i2c_device_probe+0xc0/0xfc) from [<c063e350>] (driver_probe_device+0x90/0x1ac) | |
<4>[ 0.519363] [<c063e350>] (driver_probe_device+0x90/0x1ac) from [<c063e4f8>] (__driver_attach+0x8c/0x90) | |
<4>[ 0.519433] [<c063e4f8>] (__driver_attach+0x8c/0x90) from [<c063d55c>] (bus_for_each_dev+0x5c/0x88) | |
<4>[ 0.519501] [<c063d55c>] (bus_for_each_dev+0x5c/0x88) from [<c063dd28>] (bus_add_driver+0x180/0x254) | |
<4>[ 0.519569] [<c063dd28>] (bus_add_driver+0x180/0x254) from [<c063e9a4>] (driver_register+0x78/0x13c) | |
<4>[ 0.519640] [<c063e9a4>] (driver_register+0x78/0x13c) from [<c06cdcf4>] (i2c_register_driver+0x2c/0xb4) | |
<4>[ 0.519718] [<c06cdcf4>] (i2c_register_driver+0x2c/0xb4) from [<c041a404>] (act8846_module_init+0x10/0x34) | |
<4>[ 0.519798] [<c041a404>] (act8846_module_init+0x10/0x34) from [<c04336e8>] (do_one_initcall+0xfc/0x164) | |
<4>[ 0.519870] [<c04336e8>] (do_one_initcall+0xfc/0x164) from [<c040893c>] (kernel_init+0x98/0x13c) | |
<4>[ 0.519938] [<c040893c>] (kernel_init+0x98/0x13c) from [<c0439a08>] (kernel_thread_exit+0x0/0x8) | |
<4>[ 0.520011] ---[ end trace f4bbaf83fed11b30 ]--- | |
<4>[ 0.521792] act8846_set_init act_ldo4 =3300000mV end | |
<4>[ 0.522467] ------------[ cut here ]------------ | |
<4>[ 0.522510] WARNING: at drivers/regulator/core.c:1406 _regulator_disable+0x128/0x250() | |
<4>[ 0.522564] unbalanced disables for ACT_LDO5 | |
<4>[ 0.522609] [<c043e3b0>] (unwind_backtrace+0x0/0xf8) from [<c046f45c>] (warn_slowpath_common+0x4c/0x64) | |
<4>[ 0.522681] [<c046f45c>] (warn_slowpath_common+0x4c/0x64) from [<c046f508>] (warn_slowpath_fmt+0x30/0x40) | |
<4>[ 0.522754] [<c046f508>] (warn_slowpath_fmt+0x30/0x40) from [<c06244e8>] (_regulator_disable+0x128/0x250) | |
<4>[ 0.522828] [<c06244e8>] (_regulator_disable+0x128/0x250) from [<c0624640>] (regulator_disable+0x30/0x70) | |
<4>[ 0.522901] [<c0624640>] (regulator_disable+0x30/0x70) from [<c0450114>] (act8846_set_init+0x19c/0x2a8) | |
<4>[ 0.522975] [<c0450114>] (act8846_set_init+0x19c/0x2a8) from [<c08e5824>] (act8846_i2c_probe+0x150/0x1a4) | |
<4>[ 0.523051] [<c08e5824>] (act8846_i2c_probe+0x150/0x1a4) from [<c06cb77c>] (i2c_device_probe+0xc0/0xfc) | |
<4>[ 0.523123] [<c06cb77c>] (i2c_device_probe+0xc0/0xfc) from [<c063e350>] (driver_probe_device+0x90/0x1ac) | |
<4>[ 0.523195] [<c063e350>] (driver_probe_device+0x90/0x1ac) from [<c063e4f8>] (__driver_attach+0x8c/0x90) | |
<4>[ 0.523264] [<c063e4f8>] (__driver_attach+0x8c/0x90) from [<c063d55c>] (bus_for_each_dev+0x5c/0x88) | |
<4>[ 0.523332] [<c063d55c>] (bus_for_each_dev+0x5c/0x88) from [<c063dd28>] (bus_add_driver+0x180/0x254) | |
<4>[ 0.523400] [<c063dd28>] (bus_add_driver+0x180/0x254) from [<c063e9a4>] (driver_register+0x78/0x13c) | |
<4>[ 0.523470] [<c063e9a4>] (driver_register+0x78/0x13c) from [<c06cdcf4>] (i2c_register_driver+0x2c/0xb4) | |
<4>[ 0.523545] [<c06cdcf4>] (i2c_register_driver+0x2c/0xb4) from [<c041a404>] (act8846_module_init+0x10/0x34) | |
<4>[ 0.523620] [<c041a404>] (act8846_module_init+0x10/0x34) from [<c04336e8>] (do_one_initcall+0xfc/0x164) | |
<4>[ 0.523691] [<c04336e8>] (do_one_initcall+0xfc/0x164) from [<c040893c>] (kernel_init+0x98/0x13c) | |
<4>[ 0.523757] [<c040893c>] (kernel_init+0x98/0x13c) from [<c0439a08>] (kernel_thread_exit+0x0/0x8) | |
<4>[ 0.523819] ---[ end trace f4bbaf83fed11b31 ]--- | |
<4>[ 0.525594] act8846_set_init act_ldo6 =3300000mV end | |
<4>[ 0.526731] act8846_set_init act_ldo7 =1800000mV end | |
<4>[ 0.527405] ------------[ cut here ]------------ | |
<4>[ 0.527448] WARNING: at drivers/regulator/core.c:1406 _regulator_disable+0x128/0x250() | |
<4>[ 0.527502] unbalanced disables for ACT_LDO8 | |
<4>[ 0.527546] [<c043e3b0>] (unwind_backtrace+0x0/0xf8) from [<c046f45c>] (warn_slowpath_common+0x4c/0x64) | |
<4>[ 0.527617] [<c046f45c>] (warn_slowpath_common+0x4c/0x64) from [<c046f508>] (warn_slowpath_fmt+0x30/0x40) | |
<4>[ 0.527691] [<c046f508>] (warn_slowpath_fmt+0x30/0x40) from [<c06244e8>] (_regulator_disable+0x128/0x250) | |
<4>[ 0.527764] [<c06244e8>] (_regulator_disable+0x128/0x250) from [<c0624640>] (regulator_disable+0x30/0x70) | |
<4>[ 0.527837] [<c0624640>] (regulator_disable+0x30/0x70) from [<c0450114>] (act8846_set_init+0x19c/0x2a8) | |
<4>[ 0.527911] [<c0450114>] (act8846_set_init+0x19c/0x2a8) from [<c08e5824>] (act8846_i2c_probe+0x150/0x1a4) | |
<4>[ 0.527986] [<c08e5824>] (act8846_i2c_probe+0x150/0x1a4) from [<c06cb77c>] (i2c_device_probe+0xc0/0xfc) | |
<4>[ 0.528058] [<c06cb77c>] (i2c_device_probe+0xc0/0xfc) from [<c063e350>] (driver_probe_device+0x90/0x1ac) | |
<4>[ 0.528129] [<c063e350>] (driver_probe_device+0x90/0x1ac) from [<c063e4f8>] (__driver_attach+0x8c/0x90) | |
<4>[ 0.528199] [<c063e4f8>] (__driver_attach+0x8c/0x90) from [<c063d55c>] (bus_for_each_dev+0x5c/0x88) | |
<4>[ 0.528266] [<c063d55c>] (bus_for_each_dev+0x5c/0x88) from [<c063dd28>] (bus_add_driver+0x180/0x254) | |
<4>[ 0.528334] [<c063dd28>] (bus_add_driver+0x180/0x254) from [<c063e9a4>] (driver_register+0x78/0x13c) | |
<4>[ 0.528405] [<c063e9a4>] (driver_register+0x78/0x13c) from [<c06cdcf4>] (i2c_register_driver+0x2c/0xb4) | |
<4>[ 0.528479] [<c06cdcf4>] (i2c_register_driver+0x2c/0xb4) from [<c041a404>] (act8846_module_init+0x10/0x34) | |
<4>[ 0.528555] [<c041a404>] (act8846_module_init+0x10/0x34) from [<c04336e8>] (do_one_initcall+0xfc/0x164) | |
<4>[ 0.528625] [<c04336e8>] (do_one_initcall+0xfc/0x164) from [<c040893c>] (kernel_init+0x98/0x13c) | |
<4>[ 0.528692] [<c040893c>] (kernel_init+0x98/0x13c) from [<c0439a08>] (kernel_thread_exit+0x0/0x8) | |
<4>[ 0.528753] ---[ end trace f4bbaf83fed11b32 ]--- | |
<4>[ 0.528793] act8846_set_init,line=103 END | |
<4>[ 0.528865] i2c-core: driver [act8846] using legacy suspend method | |
<4>[ 0.528909] i2c-core: driver [act8846] using legacy resume method | |
<6>[ 0.588633] rk616 4-0050: rk616 core probe success! | |
<6>[ 0.588720] Switching to clocksource rk_timer | |
<6>[ 0.594209] Switched to NOHz mode on CPU #0 | |
<6>[ 0.594846] Switched to NOHz mode on CPU #2 | |
<6>[ 0.594859] Switched to NOHz mode on CPU #1 | |
<6>[ 0.594871] Switched to NOHz mode on CPU #3 | |
<4>[ 0.595611] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf70ac000 | |
<4>[ 0.595696] fb0:win0 | |
<4>[ 0.595702] fb1:win1 | |
<4>[ 0.595706] fb2:win2 | |
<4>[ 0.595802] rk3188 lcdc1 clk enable... | |
<4>[ 0.620906] rk3188 lcdc1 clk disable... | |
<4>[ 0.653013] fb0:phy:90b00000>>vir:f8000000>>len:0xd00000 | |
<4>[ 0.653266] rk_fb_register>>>>>fb0 | |
<4>[ 0.653561] rk_fb_register>>>>>fb1 | |
<4>[ 0.653616] rk3188 lcdc1 clk enable... | |
<4>[ 0.653656] lcdc1: dclk:76800000>>fps:50 | |
<6>[ 0.653690] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok! | |
<6>[ 0.653735] lcdc1 wakeup from standby! | |
<6>[ 0.653765] lcdc1 win0 open,atv layer:1 | |
<4>[ 0.654205] rk3188 lcdc1 probe ok! | |
<4>[ 0.654272] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf70b8000 | |
<4>[ 0.654339] fb0:win0 | |
<4>[ 0.654343] fb1:win1 | |
<4>[ 0.654348] fb2:win2 | |
<4>[ 0.654426] rk3188 lcdc0 clk enable... | |
<4>[ 0.679512] rk3188 lcdc0 clk disable... | |
<4>[ 0.679548] fb2:phy:90b00000>>vir:f8000000>>len:0xd00000 | |
<4>[ 0.679737] rk_fb_register>>>>>fb2 | |
<4>[ 0.680004] rk_fb_register>>>>>fb3 | |
<4>[ 0.680034] rk3188 lcdc0 probe ok! | |
<6>[ 0.761602] rk616-lvds rk616-lvds: rk616 lvds probe success! | |
<6>[ 0.762760] NET: Registered protocol family 2 | |
<6>[ 0.762909] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) | |
<6>[ 0.763311] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) | |
<6>[ 0.765202] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) | |
<6>[ 0.766313] TCP: Hash tables configured (established 131072 bind 65536) | |
<6>[ 0.766362] TCP reno registered | |
<6>[ 0.766393] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
<6>[ 0.766461] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
<6>[ 0.766776] NET: Registered protocol family 1 | |
<4>[ 0.766953] ------------[ cut here ]------------ | |
<4>[ 0.767003] WARNING: at drivers/gpio/gpiolib.c:101 gpio_ensure_requested+0x54/0x1b0() | |
<4>[ 0.767058] autorequest GPIO-284 | |
<4>[ 0.767111] [<c043e3b0>] (unwind_backtrace+0x0/0xf8) from [<c046f45c>] (warn_slowpath_common+0x4c/0x64) | |
<4>[ 0.767185] [<c046f45c>] (warn_slowpath_common+0x4c/0x64) from [<c046f508>] (warn_slowpath_fmt+0x30/0x40) | |
<4>[ 0.767260] [<c046f508>] (warn_slowpath_fmt+0x30/0x40) from [<c0609100>] (gpio_ensure_requested+0x54/0x1b0) | |
<4>[ 0.767338] [<c0609100>] (gpio_ensure_requested+0x54/0x1b0) from [<c06096f8>] (gpio_direction_input+0x90/0x190) | |
<4>[ 0.767419] [<c06096f8>] (gpio_direction_input+0x90/0x190) from [<c0612b98>] (rk29_backlight_probe+0x58/0x260) | |
<4>[ 0.767503] [<c0612b98>] (rk29_backlight_probe+0x58/0x260) from [<c063f568>] (platform_drv_probe+0x18/0x1c) | |
<4>[ 0.767581] [<c063f568>] (platform_drv_probe+0x18/0x1c) from [<c063e350>] (driver_probe_device+0x90/0x1ac) | |
<4>[ 0.767655] [<c063e350>] (driver_probe_device+0x90/0x1ac) from [<c063e4f8>] (__driver_attach+0x8c/0x90) | |
<4>[ 0.767727] [<c063e4f8>] (__driver_attach+0x8c/0x90) from [<c063d55c>] (bus_for_each_dev+0x5c/0x88) | |
<4>[ 0.767799] [<c063d55c>] (bus_for_each_dev+0x5c/0x88) from [<c063dd28>] (bus_add_driver+0x180/0x254) | |
<4>[ 0.767870] [<c063dd28>] (bus_add_driver+0x180/0x254) from [<c063e9a4>] (driver_register+0x78/0x13c) | |
<4>[ 0.767947] [<c063e9a4>] (driver_register+0x78/0x13c) from [<c0419fbc>] (rk29_backlight_init+0xc/0x18) | |
<4>[ 0.768027] [<c0419fbc>] (rk29_backlight_init+0xc/0x18) from [<c04336e8>] (do_one_initcall+0xfc/0x164) | |
<4>[ 0.768102] [<c04336e8>] (do_one_initcall+0xfc/0x164) from [<c040893c>] (kernel_init+0x98/0x13c) | |
<4>[ 0.768173] [<c040893c>] (kernel_init+0x98/0x13c) from [<c0439a08>] (kernel_thread_exit+0x0/0x8) | |
<4>[ 0.768238] ---[ end trace f4bbaf83fed11b33 ]--- | |
<4>[ 0.768383] RK29 Backlight Driver Initialized. | |
<6>[ 0.768595] Unpacking initramfs... | |
<6>[ 0.831793] Freeing initrd memory: 1280K | |
<6>[ 0.831908] PMU: registered new PMU device of type 0 | |
<4>[ 0.832033] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 2 | |
<4>[ 0.832087] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 2 | |
<4>[ 0.833231] rk3188 cpufreq version 2.1, suspend freq 1008 MHz | |
<4>[ 0.834224] highmem bounce pool size: 64 pages | |
<6>[ 0.834380] ashmem: initialized | |
<6>[ 0.839128] fuse init (API version 7.16) | |
<6>[ 0.840242] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) | |
<6>[ 0.840300] io scheduler noop registered | |
<6>[ 0.840331] io scheduler deadline registered | |
<6>[ 0.840404] io scheduler cfq registered (default) | |
<6>[ 0.847679] rga: Driver loaded succesfully | |
<4>[ 0.847875] rk_serial.c v1.6 2013-12-23 | |
<6>[ 0.847990] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0 | |
<6>[ 0.848169] rk_serial rk_serial.0: membase 0xf70c0000 | |
<6>[ 0.848253] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3 | |
<6>[ 0.848412] rk_serial rk_serial.3: membase 0xf70c8000 | |
<4>[ 0.848540] ==wftest_driver== | |
<4>[ 0.848606] ret=0 | |
<6>[ 0.848755] Rockchip ion module(version: 1.0) is successfully loaded | |
<6>[ 0.851376] loop: module loaded | |
<6>[ 0.851436] Android kernel panic handler initialized (bind=kpanic) | |
<6>[ 0.852133] PPP generic driver version 2.4.2 | |
<6>[ 0.852308] PPP Deflate Compression module registered | |
<6>[ 0.852349] PPP BSD Compression module registered | |
<6>[ 0.853077] PPP MPPE Compression module registered | |
<6>[ 0.853122] NET: Registered protocol family 24 | |
<6>[ 0.853236] usbcore: registered new interface driver cdc_ether | |
<6>[ 0.853324] usbcore: registered new interface driver cdc_subset | |
<6>[ 0.853399] usbcore: registered new interface driver zaurus | |
<6>[ 0.853454] cdc_ncm: 04-Aug-2011 | |
<6>[ 0.853513] usbcore: registered new interface driver cdc_ncm | |
<4>[ 0.853557] Rockchip WiFi SYS interface (V1.00) ... | |
<6>[ 0.853626] Initializing USB Mass Storage driver... | |
<6>[ 0.853707] usbcore: registered new interface driver usb-storage | |
<6>[ 0.853752] USB Mass Storage support registered. | |
<6>[ 0.853880] usbcore: registered new interface driver usbserial | |
<6>[ 0.853966] USB Serial support registered for generic | |
<6>[ 0.854043] usbcore: registered new interface driver usbserial_generic | |
<6>[ 0.854090] usbserial: USB Serial Driver core | |
<6>[ 0.854150] USB Serial support registered for GSM modem (1-port) | |
<6>[ 0.854233] usbcore: registered new interface driver option | |
<6>[ 0.854275] option: v0.7.2:USB Driver for GSM modems | |
<6>[ 1.065959] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode | |
<6>[ 1.066000] usb20_otg usb20_otg: DWC OTG Controller | |
<6>[ 1.066107] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1 | |
<6>[ 1.066171] usb20_otg usb20_otg: irq 48, io mem 0x00000000 | |
<6>[ 1.066203] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest | |
<6>[ 1.066275] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
<6>[ 1.066314] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
<6>[ 1.066355] usb usb1: Product: DWC OTG Controller | |
<6>[ 1.066383] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd | |
<6>[ 1.066417] usb usb1: SerialNumber: usb20_otg | |
<6>[ 1.066675] hub 1-0:1.0: USB hub found | |
<6>[ 1.066707] hub 1-0:1.0: 1 port detected | |
<6>[ 1.069306] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000 | |
<6>[ 1.279671] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode | |
<6>[ 1.279705] usb20_host usb20_host: DWC OTG Controller | |
<6>[ 1.279751] usb20_host usb20_host: new USB bus registered, assigned bus number 2 | |
<6>[ 1.279805] usb20_host usb20_host: irq 49, io mem 0x00000000 | |
<6>[ 1.279872] DWC_OTG: Init: Port Power? op_state=1 | |
<6>[ 1.279899] DWC_OTG: Init: Power Port (0) | |
<6>[ 1.279949] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
<6>[ 1.279987] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
<6>[ 1.280026] usb usb2: Product: DWC OTG Controller | |
<6>[ 1.280053] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd | |
<6>[ 1.280085] usb usb2: SerialNumber: usb20_host | |
<6>[ 1.280317] hub 2-0:1.0: USB hub found | |
<6>[ 1.280345] hub 2-0:1.0: 1 port detected | |
<6>[ 1.281147] cfg80211: Calling CRDA to update world regulatory domain | |
<6>[ 1.281469] android_usb gadget: Mass Storage Function, version: 2009/09/11 | |
<6>[ 1.281514] android_usb gadget: Number of LUNs=2 | |
<6>[ 1.281543] lun0: LUN: removable file: (no medium) | |
<6>[ 1.281572] lun1: LUN: removable file: (no medium) | |
<6>[ 1.281745] android_usb gadget: android_usb ready | |
<6>[ 1.281918] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0 | |
<6>[ 1.282137] usbcore: registered new interface driver xpad | |
<6>[ 1.282204] usbcore: registered new interface driver usb_acecad | |
<6>[ 1.282237] acecad: v3.2:USB Acecad Flair tablet driver | |
<6>[ 1.282289] usbcore: registered new interface driver aiptek | |
<6>[ 1.282321] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) | |
<6>[ 1.282365] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen | |
<6>[ 1.282426] usbcore: registered new interface driver gtco | |
<4>[ 1.282457] GTCO usb driver version: 2.00.0006 | |
<6>[ 1.282509] usbcore: registered new interface driver hanwang | |
<6>[ 1.282562] usbcore: registered new interface driver kbtab | |
<6>[ 1.282595] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver | |
<6>[ 1.282651] usbcore: registered new interface driver wacom | |
<6>[ 1.282683] wacom: v1.52:USB Wacom tablet driver | |
<6>[ 1.282733] usbcore: registered new interface driver hctusbtouchscreen | |
<6>[ 1.282866] ++++++++remotectl_init | |
<4>[ 1.282905] ++++++++remotectl_probe | |
<4>[ 1.282942] remotectl probe j=0x0 | |
<4>[ 1.282963] remotectl probe j=0x1 | |
<4>[ 1.282983] remotectl probe j=0x2 | |
<6>[ 1.283098] input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1 | |
<3>[ 1.283540] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.283755] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.283968] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<3>[ 1.284241] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.284513] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.284783] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<3>[ 1.284996] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.285210] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.285422] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<3>[ 1.285635] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.285850] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.286061] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<3>[ 1.286330] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.286599] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.286869] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<6>[ 1.286919] rtc_hym8563 1-0051: clock/calendar information is no longer guaranteed | |
<3>[ 1.287414] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.287916] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.288416] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<3>[ 1.288978] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.289537] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.290095] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<3>[ 1.290600] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.291102] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.291603] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<3>[ 1.379396] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.379963] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.380523] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<3>[ 1.380942] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.381357] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.381773] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<3>[ 1.381989] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.382205] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.382422] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<3>[ 1.382986] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.383549] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.384111] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<6>[ 1.384341] using rtc device, rtc_hym8563, for alarms | |
<6>[ 1.384390] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0 | |
<6>[ 1.384459] i2c /dev entries driver | |
<6>[ 1.384897] lirc_dev: IR Remote Control driver registered, major 250 | |
<6>[ 1.384935] IR NEC protocol handler initialized | |
<6>[ 1.384963] IR RC5(x) protocol handler initialized | |
<6>[ 1.384992] IR RC6 protocol handler initialized | |
<6>[ 1.385017] IR JVC protocol handler initialized | |
<6>[ 1.385042] IR Sony protocol handler initialized | |
<6>[ 1.385068] IR RC5 (streamzap) protocol handler initialized | |
<6>[ 1.385100] IR LIRC bridge handler initialized | |
<6>[ 1.385125] Linux video capture interface: v2.00 | |
<4>[ 1.385278] def_ref_volt: 1800mV, curr_ref_volt: 1800mV | |
<6>[ 1.385788] device-mapper: uevent: version 1.0.3 | |
<6>[ 1.385973] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected] | |
<6>[ 1.386093] Bluetooth: HCI UART driver ver 2.2 | |
<6>[ 1.386123] Bluetooth: HCI H4 protocol initialized | |
<6>[ 1.386151] Bluetooth: HCILL protocol initialized | |
<6>[ 1.386210] cpuidle: using governor ladder | |
<6>[ 1.386235] cpuidle: using governor menu | |
<6>[ 1.431556] | |
<6>[ 1.431559] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc0] | |
<4>[ 1.431608] | |
<4>[ 1.431610] ================= | |
<4>[ 1.431614] sdmmc_rescan..2017.. ====find no SDMMC host. [mmc0] | |
<6>[ 1.431709] .Line3986..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08. [sd_mmc] | |
<6>[ 1.431862] | |
<6>[ 1.431865] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc1] | |
<6>[ 1.431934] .Line3986..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08. [sdio] | |
<6>[ 1.432025] Skipping unavailable LED gpio -1 (button-backlight) | |
<4>[ 1.433060] drivers/hid/hid-wizhong.c:484:wizhong_init | |
<4>[ 1.433112] drivers/hid/hid-wizhong.c:488:wizhong_init | |
<4>[ 1.433145] drivers/hid/hid-ty009.c:220:wizhong_init | |
<4>[ 1.433197] drivers/hid/hid-ty009.c:224:wizhong_init | |
<4>[ 1.433225] drivers/hid/hid-ty116.c:337:wizhong_init | |
<4>[ 1.433272] drivers/hid/hid-ty116.c:341:wizhong_init | |
<6>[ 1.433393] usbcore: registered new interface driver usbhid | |
<6>[ 1.433427] usbhid: USB HID core driver | |
<6>[ 1.448805] rk29_sdmmc_change_clk_div..1961.. newDiv=40, newCLK=300Khz [sdio] | |
<6>[ 1.479106] logger: created 256K log 'log_main' | |
<6>[ 1.479184] logger: created 256K log 'log_events' | |
<6>[ 1.479266] logger: created 256K log 'log_radio' | |
<6>[ 1.479338] logger: created 256K log 'log_system' | |
<4>[ 1.479700] rk616_get_parameter : THIS IS FOR mid | |
<6>[ 1.499989] Enter::audio_card_init----290 | |
<4>[ 1.500153] rk616_probe : rk616 or pdata or rcv_ctl_gpio is NULL! | |
<4>[ 1.500188] rk616_probe : rk616 or pdata or mic_sel_gpio is NULL! | |
<6>[ 1.534340] asoc: rk616-hifi <-> rk29_i2s.1 mapping ok | |
<6>[ 1.539276] asoc: rk616-voice <-> rk29_i2s.1 mapping ok | |
<6>[ 1.539621] ALSA device list: | |
<6>[ 1.539642] #0: RK_RK616 | |
<6>[ 1.539736] GACT probability NOT on | |
<6>[ 1.539763] Mirror/redirect action on | |
<6>[ 1.539785] u32 classifier | |
<6>[ 1.539801] Actions configured | |
<6>[ 1.539822] Netfilter messages via NETLINK v0.30. | |
<6>[ 1.539879] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) | |
<6>[ 1.540159] ctnetlink v0.93: registering with nfnetlink. | |
<6>[ 1.540213] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 | |
<6>[ 1.540251] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. | |
<6>[ 1.540490] xt_time: kernel timezone is -0000 | |
<6>[ 1.540626] ip_tables: (C) 2000-2006 Netfilter Core Team | |
<6>[ 1.540757] arp_tables: (C) 2002 David S. Miller | |
<6>[ 1.540813] TCP cubic registered | |
<6>[ 1.540831] Initializing XFRM netlink socket | |
<6>[ 1.541163] NET: Registered protocol family 10 | |
<6>[ 1.541644] Mobile IPv6 | |
<6>[ 1.541676] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
<6>[ 1.541794] IPv6 over IPv4 tunneling driver | |
<6>[ 1.542331] NET: Registered protocol family 17 | |
<6>[ 1.542373] NET: Registered protocol family 15 | |
<6>[ 1.668798] usb 2-1: new high speed USB device number 2 using usb20_host | |
<6>[ 1.678875] Bluetooth: RFCOMM TTY layer initialized | |
<6>[ 1.678909] Bluetooth: RFCOMM socket layer initialized | |
<6>[ 1.678938] Bluetooth: RFCOMM ver 1.11 | |
<6>[ 1.678960] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
<6>[ 1.678990] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
<6>[ 1.679131] NET: Registered protocol family 35 | |
<6>[ 1.679283] [BT_RFKILL]: Enter rfkill_rk_init | |
<6>[ 1.679375] [BT_RFKILL]: Request irq for bt wakeup host | |
<6>[ 1.679416] [BT_RFKILL]: ** disable irq | |
<6>[ 1.679489] [BT_RFKILL]: bt shut off power | |
<6>[ 1.708796] [BT_RFKILL]: ap6330 device registered. | |
<6>[ 1.738822] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
<5>[ 1.738878] Registering SWP/SWPB emulation handler | |
<6>[ 1.739229] ddrfreq: verion 3.2 20131126 | |
<6>[ 1.739269] ddrfreq: fix cpu pause bug | |
<6>[ 1.739304] ddrfreq: normal 396MHz video 300MHz video_low 0MHz dualview 456MHz idle 0MHz suspend 198MHz reboot 300MHz | |
<3>[ 1.739611] rk_cam_cif(3329):rk3066b-camera version: v0.3.21 Zoom by ipprk_sensor_io_init | |
<4>[ 1.741362] rk_sensor_power on:0, 1636 | |
<4>[ 1.741389] rk_sensor_ioctrl on:1 | |
<4>[ 1.741408] rk_sensor_ioctrl Cam_Reset | |
<4>[ 1.741431] rk_sensor_ioctrl on:1 | |
<4>[ 1.741450] rk_sensor_ioctrl Cam_PowerDown | |
<4>[ 1.741474] rk_sensor_ioctrl on:0 | |
<4>[ 1.741492] rk_sensor_ioctrl Cam_Mclk | |
<4>[ 1.741513] rk_sensor_ioctrl on:0 | |
<4>[ 1.741533] rk_sensor_ioctrl Cam_Power | |
<4>[ 1.741560] ret: 0 | |
<4>[ 1.758811] SensorPwrSeq-power: 0 | |
<6>[ 1.763043] ddrfreq: change freq to 396 MHz when normal | |
<4>[ 1.769568] rk_sensor_power on:1, 1636 | |
<4>[ 1.769590] rk_sensor_ioctrl on:1 | |
<4>[ 1.769607] rk_sensor_ioctrl Cam_Power | |
<4>[ 1.774268] rk_cif_power ldo_18____ =1800000mV end | |
<4>[ 1.774292] ret: 0 | |
<6>[ 1.787609] rk616-hdmi rk616-hdmi.1: rk616 hdmi probe success. | |
<4>[ 1.788791] SensorPwrSeq-power: 1 | |
<4>[ 1.788810] rk_sensor_ioctrl on:24000000 | |
<4>[ 1.788830] rk_sensor_ioctrl Cam_Mclk | |
<4>[ 1.788855] rk_sensor_ioctrl on:0 | |
<4>[ 1.788871] rk_sensor_ioctrl Cam_PowerDown | |
<4>[ 1.788893] rk_sensor_ioctrl on:1 | |
<4>[ 1.788910] rk_sensor_ioctrl Cam_Reset | |
<4>[ 1.808788] rk_sensor_ioctrl on:0 | |
<4>[ 1.808807] rk_sensor_ioctrl Cam_Reset | |
<4>[ 1.858973] min_w = 800,min_h = 600 ,max_real_w = 1600,max_real_h = 1200,max_w = 1600,max_h =1200 | |
<6>[ 1.880292] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608 | |
<6>[ 1.880327] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
<6>[ 1.880364] usb 2-1: Product: USB2.0 Hub | |
<6>[ 1.880801] hub 2-1:1.0: USB hub found | |
<6>[ 1.881144] hub 2-1:1.0: 4 ports detected | |
<4>[ 1.899789] rk_sensor_power on:0, 1636 | |
<4>[ 1.899811] rk_sensor_ioctrl on:1 | |
<4>[ 1.899828] rk_sensor_ioctrl Cam_Reset | |
<4>[ 1.899847] rk_sensor_ioctrl on:1 | |
<4>[ 1.899863] rk_sensor_ioctrl Cam_PowerDown | |
<4>[ 1.899883] rk_sensor_ioctrl on:0 | |
<4>[ 1.899900] rk_sensor_ioctrl Cam_Mclk | |
<4>[ 1.899928] rk_sensor_ioctrl on:0 | |
<4>[ 1.899946] rk_sensor_ioctrl Cam_Power | |
<4>[ 1.899967] ret: 0 | |
<4>[ 1.918798] SensorPwrSeq-power: 0 | |
<4>[ 1.928836] Probe gc2145_front_3 success | |
<6>[ 1.928984] input: rk_headsetdet as /devices/platform/rk_headsetdet.0/input/input2 | |
<6>[ 1.929248] input: rk_micdet as /devices/platform/rk_micdet.0/input/input3 | |
<3>[ 1.929897] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 1.930448] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 1.930998] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<3>[ 1.931040] rtc_hym8563 1-0051: hctosys: invalid date/time | |
<4>[ 1.931094] es8323_i2c_probe | |
<6>[ 1.934447] asoc: dit-hifi <-> rk-spdif mapping ok | |
<6>[ 1.934763] Freeing init memory: 172K | |
<4>[ 1.986093] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. | |
<6>[ 2.017524] keychord: using input dev rk29-keypad for fevent | |
<6>[ 2.017559] keychord: using input dev rkxx-remotectl for fevent | |
<6>[ 2.159115] usb 2-1.3: new low speed USB device number 3 using usb20_host | |
<4>[ 2.251851] gp_rknand_info = : 0xef0e5100 | |
<4>[ 2.251917] rk30_chip_set:1 | |
<4>[ 2.251958] request IRQ_NANDC irq , ret=0......... | |
<4>[ 2.251990] FTL INFO:Version = 438,Date = 20130620 | |
<4>[ 2.252055] FlashCopyProgBuf1=0xc1439000 | |
<4>[ 2.252095] ATime: 40 ns AHB: 140 timming: 1081 | |
<4>[ 2.252120] No.1 FLASH INFO:ff ff ff ff ff | |
<4>[ 2.252139] gBootMedia = 2 gSdmmcFwPartOffset =2000! | |
<4>[ 2.252167] CardId = 2 | |
<6>[ 2.314350] usb 2-1.3: New USB device found, idVendor=040b, idProduct=2013 | |
<6>[ 2.314387] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
<6>[ 2.314429] usb 2-1.3: Product: 2.4G Wireless Keyboard&Mouse | |
<6>[ 2.321070] input: 2.4G Wireless Keyboard&Mouse as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3:1.0/input/input4 | |
<6>[ 2.321299] keychord: using input dev 2.4G Wireless Keyboard&Mouse for fevent | |
<6>[ 2.321343] generic-usb 0003:040B:2013.0001: input: USB HID v1.10 Keyboard [2.4G Wireless Keyboard&Mouse] on usb-usb20_host-1.3/input0 | |
<6>[ 2.334182] input: 2.4G Wireless Keyboard&Mouse as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3:1.1/input/input5 | |
<6>[ 2.334430] keychord: using input dev 2.4G Wireless Keyboard&Mouse for fevent | |
<6>[ 2.334474] generic-usb 0003:040B:2013.0002: input: USB HID v1.10 Mouse [2.4G Wireless Keyboard&Mouse] on usb-usb20_host-1.3/input1 | |
<4>[ 2.387511] rk29_dma_set_buffdone_fn | |
<4>[ 2.387535] EmmcBus_khz = 48000 | |
<4>[ 2.387551] SDM_Init OK | |
<4>[ 2.388568] SDC_SetHostBusWidth flag 1 , 2 bits | |
<4>[ 2.388611] EmmcBus_khz = 4000 , need = 4000 | |
<4>[ 2.407074] EmmcBus_khz = 24000 , need = 36000 | |
<4>[ 2.407602] EmmcBus_khz = 96000 , need = 100000 | |
<4>[ 2.407631] SDC_SetHostBusWidth flag 3 , 8 bits | |
<4>[ 2.407695] SdmmcInit BootCapSize: 0x400 | |
<4>[ 2.407717] gEmmcBootPart 1 | |
<4>[ 2.408928] SdmmcInit UserCapSize: 0x1d5a000 | |
<4>[ 2.408952] SdmmcInit ret = 0! | |
<4>[ 2.408971] rknand_buffer.c version: 4.38 20121130! | |
<5>[ 2.409114] 9 cmdlinepart partitions found on MTD device rk29xxnand | |
<5>[ 2.409154] Creating 9 MTD partitions on "rk29xxnand": | |
<5>[ 2.409184] 0x000000400000-0x000000800000 : "misc" | |
<5>[ 2.410201] 0x000000800000-0x000001000000 : "kernel" | |
<5>[ 2.411046] 0x000001000000-0x000002000000 : "boot" | |
<5>[ 2.411833] 0x000002000000-0x000004000000 : "recovery" | |
<5>[ 2.412629] 0x000004000000-0x000008000000 : "backup" | |
<5>[ 2.413479] 0x000008000000-0x000010000000 : "cache" | |
<5>[ 2.414368] 0x000050000000-0x000050400000 : "kpanic" | |
<6>[ 2.415895] apanic: Bound to mtd partition 'kpanic' | |
<6>[ 2.415928] apanic: No panic data available | |
<5>[ 2.416092] 0x000050400000-0x000090400000 : "system" | |
<5>[ 2.417677] 0x000090400000-0x0003ab000000 : "userdata" | |
<4>[ 2.428822] ---headsetobserve_work--- | |
<4>[ 2.428854] old_status == headset_info->headset_status | |
<4>[ 2.428882] ---micobserve_work--- | |
<4>[ 2.428906] old_status == mic_info->mic_status | |
<6>[ 2.449988] EXT4-fs (mtdblock7): mounted filesystem without journal. Opts: noauto_da_alloc | |
<6>[ 2.704825] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc | |
<6>[ 2.738359] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc | |
<4>[ 2.767025] UMP: Using OS memory backend, allocation limit: 1073741824 | |
<4>[ 2.767063] UMP: UMP device driver loaded | |
<4>[ 2.793038] Mali: Mali400 inside of rk3188! | |
<4>[ 2.793065] Mali: mali freq table num : 6 | |
<4>[ 2.793086] Mali: mali freq table :Mali: 128,Mali: 198,Mali: 256,Mali: 297,Mali: 384,Mali: 594,Mali: | |
<4>[ 2.793153] Mali: init mali clock success | |
<4>[ 2.799169] Mali: @@@@@@@Mali device driver loaded success@@@@@@@@ | |
<4>[ 2.806586] rk30_mirroring: Unknown symbol video_data_to_mirroring (err 0) | |
<4>[ 2.806651] rk30_mirroring: Unknown symbol audio_data_to_mirroring (err 0) | |
<4>[ 2.812615] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned. | |
<4>[ 2.813495] ipp irq 47 | |
<4>[ 2.813762] IPP init, version rk30-ipp 1.003 | |
<3>[ 2.870065] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl' | |
<3>[ 3.089881] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' | |
<3>[ 3.094015] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper' | |
<3>[ 3.198022] VPU_SERVICE: failed on clk_get pd_video | |
<4>[ 3.198070] vpu: power on | |
<6>[ 3.198119] VPU_SERVICE: checking hw id 4831 | |
<4>[ 3.199149] vpu: power off...done | |
<6>[ 3.199191] VPU_SERVICE: init success | |
<3>[ 3.260036] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}' | |
<3>[ 3.260085] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial' | |
<3>[ 3.260563] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead | |
<4>[ 3.359103] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in | |
<4>[ 3.359137] [rknand_sys_storage_ioctl:103] RKNAND_GET_DRM_KEY | |
<4>[ 3.359167] [rknand_sys_storage_ioctl:365] return ret = 0 | |
<3>[ 3.361529] android_usb: already disabled | |
<6>[ 3.366027] adb_open | |
<6>[ 3.366047] mtp_bind_config | |
<6>[ 3.582313] .428.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc] | |
<6>[ 3.582359] .459.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc] | |
<6>[ 3.696853] DWC_OTG: frame_number 0x3d2d, start 0x3d27, complete: 1 | |
<6>[ 3.760697] DWC_OTG: frame_number 0x3f2c, start 0x3f27, complete: 1rk fb use 3 buffers | |
<6>[ 3.884513] lcdc1 win1 open,atv layer:2 | |
<6>[ 3.884565] lcdc1 win1 closed,atv layer:1 | |
<6>[ 3.953113] rk30-lcdc rk30-lcdc.1: blank mode:0 | |
<6>[ 4.323928] DWC_OTG: frame_number 0x10c6, start 0x10bf, complete: 1 | |
<6>[ 4.468008] DWC_OTG: frame_number 0x1546, start 0x153f, complete: 1 | |
<6>[ 4.636086] DWC_OTG: frame_number 0x1a87, start 0x1a7f, complete: 1 | |
<6>[ 4.683673] DWC_OTG: frame_number 0x1c04, start 0x1bff, complete: 1 | |
<6>[ 4.752785] DWC_OTG: frame_number 0x1e2c, start 0x1e27, complete: 1 | |
<6>[ 5.064680] DWC_OTG: frame_number 0x27ec, start 0x27e7, complete: 1 | |
<6>[ 5.179669] DWC_OTG: frame_number 0x2b84, start 0x2b7f, complete: 1 | |
<6>[ 5.419884] DWC_OTG: frame_number 0x3305, start 0x32ff, complete: 1 | |
<6>[ 5.436075] DWC_OTG: frame_number 0x3387, start 0x337f, complete: 1 | |
<6>[ 5.515798] DWC_OTG: frame_number 0x3605, start 0x35ff, complete: 1 | |
<6>[ 5.840818] DWC_OTG: frame_number 0x2d, start 0x27, complete: 1 | |
<6>[ 7.509317] warning: `zygote' uses 32-bit capabilities (legacy support in use) | |
<3>[ 7.527789] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 2... | |
<3>[ 7.528303] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 1... | |
<3>[ 7.528821] i2c i2c-1: No ack, Maybe slave(addr: 0x51) not exist or abnormal power-on, retry 0... | |
<6>[ 8.529219] DWC_OTG: frame_number 0x1430, start 0x1427, complete: 1 | |
<6>[ 8.648882] DWC_OTG: frame_number 0x17ed, start 0x17e7, complete: 1 | |
<6>[ 9.249091] DWC_OTG: frame_number 0x2aaf, start 0x2aa7, complete: 1 | |
<6>[ 9.451733] DWC_OTG: frame_number 0x3104, start 0x30ff, complete: 1 | |
<6>[ 9.544673] DWC_OTG: frame_number 0x33ec, start 0x33e7, complete: 1 | |
<6>[ 9.667661] DWC_OTG: frame_number 0x37c4, start 0x37bf, complete: 1 | |
<6>[ 9.779793] DWC_OTG: frame_number 0x3b45, start 0x3b3f, complete: 1 | |
<6>[ 10.204381] request_suspend_state: wakeup (3->0) at 10155594378 (1970-01-02 00:00:02.677074374 UTC) | |
<4>[ 10.671311] Current WiFi chip is AP6330. | |
<4>[ 10.724118] ======================================================= | |
<4>[ 10.724222] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== | |
<4>[ 10.724324] ======================================================= | |
<4>[ 10.724416] RKWIFI WiFi driver (Powered by Rockchip,Ver 4.53.WFD) init. | |
<4>[ 10.724762] =========== WLAN placed in POWER ON ======== | |
<3>[ 10.724928] ANDROID-ERROR) wifi_set_power = 1 | |
<6>[ 10.724994] rk29sdk_wifi_power: 1 | |
<6>[ 10.820479] acc_open | |
<6>[ 10.820518] acc_release | |
<6>[ 10.993259] wifi turn on power | |
<3>[ 10.993343] ANDROID-ERROR) wifi_set_carddetect = 1 | |
<6>[ 10.993404] rk29sdk_wifi_set_carddetect:1 | |
<6>[ 10.993419] mmc1: slot status change detected(0-1) | |
<6>[ 11.188920] | |
<6>[ 11.188927] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc1] | |
<4>[ 11.234275] rk29_sdmmc_command_complete..2958...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 11.234852] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 11.235458] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 11.236098] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 11.237356] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 11.238063] rk29_sdmmc_command_complete..2958...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<6>[ 11.683870] DWC_OTG: frame_number 0x36c5, start 0x36bf, complete: 1 | |
<6>[ 11.689401] DWC_OTG: frame_number 0x36f1, start 0x36e7, complete: 1 | |
<6>[ 11.808883] DWC_OTG: frame_number 0x3aad, start 0x3aa7, complete: 1 | |
<6>[ 12.424841] DWC_OTG: frame_number 0xded, start 0xde7, complete: 1 | |
<4>[ 12.989059] failed to power up wifi chip, retry again (4 left) ** | |
<4>[ 12.989081] | |
<3>[ 12.990263] ANDROID-ERROR) ## wifi_remove | |
<3>[ 12.990433] ANDROID-ERROR) wifi_set_power = 0 | |
<6>[ 12.990532] rk29sdk_wifi_power: 0 | |
<6>[ 13.299797] DWC_OTG: frame_number 0x2945, start 0x293f, complete: 1 | |
<6>[ 13.384709] wifi shut off power | |
<3>[ 13.388110] ANDROID-ERROR) wifi_set_carddetect = 0 | |
<6>[ 13.392216] rk29sdk_wifi_set_carddetect:0 | |
<6>[ 13.392266] mmc1: slot status change detected(1-0) | |
<6>[ 13.392363] | |
<6>[ 13.392369] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc1] | |
<4>[ 13.392744] =========== WLAN placed in POWER OFF ======== | |
<4>[ 13.392882] =========== WLAN placed in POWER ON ======== | |
<3>[ 13.392987] ANDROID-ERROR) wifi_set_power = 1 | |
<6>[ 13.393075] rk29sdk_wifi_power: 1 | |
<6>[ 13.611755] DWC_OTG: frame_number 0x3304, start 0x32ff, complete: 1 | |
<6>[ 13.624958] DWC_OTG: frame_number 0x336e, start 0x3367, complete: 1 | |
<6>[ 13.806985] wifi turn on power | |
<3>[ 13.815122] ANDROID-ERROR) wifi_set_carddetect = 1 | |
<6>[ 13.815166] rk29sdk_wifi_set_carddetect:1 | |
<6>[ 13.815195] mmc1: slot status change detected(0-1) | |
<6>[ 14.009028] | |
<6>[ 14.009041] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc1] | |
<4>[ 14.054853] rk29_sdmmc_command_complete..2958...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 14.055829] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 14.056531] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 14.057165] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 14.057762] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 14.058326] rk29_sdmmc_command_complete..2958...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<6>[ 14.320976] DWC_OTG: frame_number 0x92e, start 0x927, complete: 1 | |
<4>[ 15.808839] failed to power up wifi chip, retry again (3 left) ** | |
<4>[ 15.808850] | |
<3>[ 15.809207] ANDROID-ERROR) ## wifi_remove | |
<3>[ 15.809246] ANDROID-ERROR) wifi_set_power = 0 | |
<6>[ 15.809283] rk29sdk_wifi_power: 0 | |
<6>[ 16.009398] wifi shut off power | |
<3>[ 16.009422] ANDROID-ERROR) wifi_set_carddetect = 0 | |
<6>[ 16.009467] rk29sdk_wifi_set_carddetect:0 | |
<6>[ 16.009498] mmc1: slot status change detected(1-0) | |
<6>[ 16.009550] | |
<6>[ 16.009555] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc1] | |
<4>[ 16.009839] =========== WLAN placed in POWER OFF ======== | |
<4>[ 16.010005] =========== WLAN placed in POWER ON ======== | |
<3>[ 16.010070] ANDROID-ERROR) wifi_set_power = 1 | |
<6>[ 16.010097] rk29sdk_wifi_power: 1 | |
<6>[ 16.275551] wifi turn on power | |
<3>[ 16.275576] ANDROID-ERROR) wifi_set_carddetect = 1 | |
<6>[ 16.275612] rk29sdk_wifi_set_carddetect:1 | |
<6>[ 16.275635] mmc1: slot status change detected(0-1) | |
<6>[ 16.468830] | |
<6>[ 16.468835] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc1] | |
<4>[ 16.514059] rk29_sdmmc_command_complete..2958...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 16.514575] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 16.515087] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 16.515601] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 16.516114] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 16.516627] rk29_sdmmc_command_complete..2958...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 18.271663] | |
<4>[ 18.271672] failed to power up wifi chip, retry again (2 left) ** | |
<4>[ 18.271697] | |
<3>[ 18.272158] ANDROID-ERROR) ## wifi_remove | |
<3>[ 18.272220] ANDROID-ERROR) wifi_set_power = 0 | |
<6>[ 18.272290] rk29sdk_wifi_power: 0 | |
<6>[ 18.435586] [BT_RFKILL]: bt shut off power | |
<6>[ 18.516108] DWC_OTG: frame_number 0xc47, start 0xc3f, complete: 1 | |
<6>[ 18.546495] wifi shut off power | |
<3>[ 18.550083] ANDROID-ERROR) wifi_set_carddetect = 0 | |
<6>[ 18.555271] rk29sdk_wifi_set_carddetect:0 | |
<6>[ 18.559493] mmc1: slot status change detected(1-0) | |
<6>[ 18.564441] | |
<6>[ 18.564448] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc1] | |
<4>[ 18.566754] =========== WLAN placed in POWER OFF ======== | |
<4>[ 18.576779] =========== WLAN placed in POWER ON ======== | |
<3>[ 18.577101] ANDROID-ERROR) wifi_set_power = 1 | |
<6>[ 18.577259] rk29sdk_wifi_power: 1 | |
<6>[ 18.950030] wifi turn on power | |
<3>[ 18.950086] ANDROID-ERROR) wifi_set_carddetect = 1 | |
<6>[ 18.950140] rk29sdk_wifi_set_carddetect:1 | |
<6>[ 18.950171] mmc1: slot status change detected(0-1) | |
<6>[ 19.028975] [BT_RFKILL]: bt turn on power | |
<6>[ 19.149061] | |
<6>[ 19.149081] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc1] | |
<4>[ 19.195323] rk29_sdmmc_command_complete..2958...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 19.195993] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 19.196672] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 19.197356] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 19.198014] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<4>[ 19.198692] rk29_sdmmc_command_complete..2958...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio] | |
<6>[ 19.425116] DWC_OTG: frame_number 0x28af, start 0x28a7, complete: 1 | |
<6>[ 19.460061] DWC_OTG: frame_number 0x29c7, start 0x29bf, complete: 1 | |
<6>[ 19.568959] DWC_OTG: frame_number 0x2d2e, start 0x2d27, complete: 1 | |
<6>[ 19.832979] DWC_OTG: frame_number 0x356e, start 0x3567, complete: 1 | |
<6>[ 20.363670] DWC_OTG: frame_number 0x604, start 0x5ff, complete: 1 | |
<6>[ 20.580094] DWC_OTG: frame_number 0xcc7, start 0xcbf, complete: 1 | |
<6>[ 20.603706] DWC_OTG: frame_number 0xd84, start 0xd7f, complete: 1 | |
<4>[ 20.948889] failed to power up wifi chip, retry again (1 left) ** | |
<4>[ 20.948909] | |
<3>[ 20.949550] ANDROID-ERROR) ## wifi_remove | |
<3>[ 20.949626] ANDROID-ERROR) wifi_set_power = 0 | |
<6>[ 20.949693] rk29sdk_wifi_power: 0 | |
<6>[ 21.187776] wifi shut off power | |
<3>[ 21.187831] ANDROID-ERROR) wifi_set_carddetect = 0 | |
<6>[ 21.187890] rk29sdk_wifi_set_carddetect:0 | |
<6>[ 21.187929] mmc1: slot status change detected(1-0) | |
<4>[ 21.188568] =========== WLAN placed in POWER OFF ======== | |
<4>[ 21.188623] | |
<4>[ 21.188628] failed to power up wifi chip, max retry reached, exits ** | |
<4>[ 21.188638] | |
<6>[ 21.219287] | |
<6>[ 21.219295] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc1] | |
<6>[ 120.065252] Enter::rk_hifi_hw_params----105 | |
<6>[ 120.069518] Enter:rk_hifi_hw_params, 155, rate=44100 | |
<6>[ 120.074546] Enter:rk_hifi_hw_params, 178, pll_out/div/params_rate(params) = 64 | |
<7>[ 120.084859] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0) | |
<4>[ 120.137411] rk616_codec_power_up : power up playback | |
<6>[ 120.209188] DWC_OTG: frame_number 0x3630, start 0x3627, complete: 1 | |
<6>[ 123.140326] qtaguid: ctrl_counterset(s 1 10015): insufficient priv from pid=414 tgid=356 uid=1000 | |
<6>[ 123.200831] DWC_OTG: frame_number 0x13ad, start 0x13a7, complete: 1rk_sensor_power on:0, 1636 | |
<4>[ 123.460588] rk_sensor_ioctrl on:1 | |
<4>[ 123.460624] rk_sensor_ioctrl Cam_Reset | |
<4>[ 123.460654] rk_sensor_ioctrl on:1 | |
<4>[ 123.460695] rk_sensor_ioctrl Cam_PowerDown | |
<4>[ 123.460730] rk_sensor_ioctrl on:0 | |
<4>[ 123.460753] rk_sensor_ioctrl Cam_Mclk | |
<4>[ 123.460784] rk_sensor_ioctrl on:0 | |
<4>[ 123.460808] rk_sensor_ioctrl Cam_Power | |
<4>[ 123.460843] ret: 0 | |
<4>[ 123.478871] SensorPwrSeq-power: 0 | |
<4>[ 123.488973] rk_sensor_power on:1, 1636 | |
<4>[ 123.489015] rk_sensor_ioctrl on:1 | |
<4>[ 123.489043] rk_sensor_ioctrl Cam_Power | |
<4>[ 123.491406] rk_cif_power ldo_18____ =1800000mV end | |
<4>[ 123.491448] ret: 0 | |
<4>[ 123.508839] SensorPwrSeq-power: 1 | |
<4>[ 123.508870] rk_sensor_ioctrl on:24000000 | |
<4>[ 123.508900] rk_sensor_ioctrl Cam_Mclk | |
<4>[ 123.508936] rk_sensor_ioctrl on:0 | |
<4>[ 123.508966] rk_sensor_ioctrl Cam_PowerDown | |
<4>[ 123.509002] rk_sensor_ioctrl on:1 | |
<4>[ 123.509028] rk_sensor_ioctrl Cam_Reset | |
<4>[ 123.528810] rk_sensor_ioctrl on:0 | |
<4>[ 123.528837] rk_sensor_ioctrl Cam_Reset | |
<4>[ 126.130009] rk616_codec_power_down : power down playback | |
<3>[ 134.072484] rk_cam_cif(2832):Camera host haven't recevie data from sensor,last fps = 0,pcdev->fps = 0,cif_irq: 1,dma_irq: 0! | |
<3>[ 134.072701] rk_cam_cif(2745):CIF_CIF_CTRL = 0xf000 | |
<3>[ 134.072766] rk_cam_cif(2746):CIF_CIF_INTEN = 0x201 | |
<3>[ 134.072826] rk_cam_cif(2747):CIF_CIF_INTSTAT = 0x0 | |
<3>[ 134.072886] rk_cam_cif(2748):CIF_CIF_FOR = 0x10001 | |
<3>[ 134.072944] rk_cam_cif(2749):CIF_CIF_CROP = 0x0 | |
<3>[ 134.073001] rk_cam_cif(2750):CIF_CIF_SET_SIZE = 0x2580320 | |
<3>[ 134.073066] rk_cam_cif(2751):CIF_CIF_SCL_CTRL = 0x10 | |
<3>[ 134.073127] rk_cam_cif(2752):CRU_PCLK_REG30 = 0X0 | |
<3>[ 134.073187] rk_cam_cif(2753):CIF_CIF_LAST_LINE = 0X1e0 | |
<3>[ 134.073249] rk_cam_cif(2755):CIF_CIF_LAST_PIX = 0X2d0 | |
<3>[ 134.073313] rk_cam_cif(2756):CIF_CIF_VIR_LINE_WIDTH = 0X320 | |
<3>[ 134.073380] rk_cam_cif(2757):CIF_CIF_LINE_NUM_ADDR = 0X0 | |
<3>[ 134.073445] rk_cam_cif(2758):CIF_CIF_FRM0_ADDR_Y = 0X90500000 | |
<3>[ 134.073514] rk_cam_cif(2759):CIF_CIF_FRM0_ADDR_UV = 0X90575300 | |
<3>[ 134.073583] rk_cam_cif(2760):CIF_CIF_FRAME_STATUS = 0X0 | |
<3>[ 134.073646] rk_cam_cif(2761):CIF_CIF_SCL_VALID_NUM = 0X808 | |
<3>[ 134.073712] rk_cam_cif(2762):CIF_CIF_CUR_DST = 0X90576960 | |
<3>[ 134.073776] rk_cam_cif(2763):CIF_CIF_LINE_NUM_ADDR = 0X0 | |
<3>[ 134.073841] rk_cam_cif(2787):CIF may be error, so reset cif for resume | |
<3>[ 137.072483] rk_cam_cif(2832):Camera host haven't recevie data from sensor,last fps = 0,pcdev->fps = 0,cif_irq: 1,dma_irq: 0! | |
<3>[ 137.072695] rk_cam_cif(2745):CIF_CIF_CTRL = 0xf000 | |
<3>[ 137.072764] rk_cam_cif(2746):CIF_CIF_INTEN = 0x201 | |
<3>[ 137.072825] rk_cam_cif(2747):CIF_CIF_INTSTAT = 0x0 | |
<3>[ 137.072886] rk_cam_cif(2748):CIF_CIF_FOR = 0x10001 | |
<3>[ 137.072944] rk_cam_cif(2749):CIF_CIF_CROP = 0x0 | |
<3>[ 137.073003] rk_cam_cif(2750):CIF_CIF_SET_SIZE = 0x2580320 | |
<3>[ 137.073070] rk_cam_cif(2751):CIF_CIF_SCL_CTRL = 0x10 | |
<3>[ 137.073131] rk_cam_cif(2752):CRU_PCLK_REG30 = 0X0 | |
<3>[ 137.073189] rk_cam_cif(2753):CIF_CIF_LAST_LINE = 0X1e0 | |
<3>[ 137.073253] rk_cam_cif(2755):CIF_CIF_LAST_PIX = 0X2d0 | |
<3>[ 137.073314] rk_cam_cif(2756):CIF_CIF_VIR_LINE_WIDTH = 0X320 | |
<3>[ 137.073380] rk_cam_cif(2757):CIF_CIF_LINE_NUM_ADDR = 0X0 | |
<3>[ 137.073445] rk_cam_cif(2758):CIF_CIF_FRM0_ADDR_Y = 0X90500000 | |
<3>[ 137.073515] rk_cam_cif(2759):CIF_CIF_FRM0_ADDR_UV = 0X90575300 | |
<3>[ 137.073578] rk_cam_cif(2760):CIF_CIF_FRAME_STATUS = 0X0 | |
<3>[ 137.073615] rk_cam_cif(2761):CIF_CIF_SCL_VALID_NUM = 0X808 | |
<3>[ 137.073652] rk_cam_cif(2762):CIF_CIF_CUR_DST = 0X90576960 | |
<3>[ 137.073688] rk_cam_cif(2763):CIF_CIF_LINE_NUM_ADDR = 0X0 | |
<4>[ 137.073735] wake up video buffer index = 0 !!! | |
<4>[ 137.073766] wake up video buffer index = 1 !!! | |
<4>[ 137.073798] wake up video buffer index = 2 !!! | |
<4>[ 137.073829] wake up video buffer index = 3 !!! | |
<3>[ 137.073862] rk_cam_cif(2817):the 2 reinit times ,wake up video buffers! | |
<3>[ 137.073873] | |
<6>[ 137.790974] qtaguid: ctrl_counterset(s 0 10015): insufficient priv from pid=414 tgid=356 uid=1000 | |
<6>[ 149.750023] Enter::rk_hifi_hw_params----105 | |
<6>[ 149.750088] Enter:rk_hifi_hw_params, 155, rate=44100 | |
<6>[ 149.750135] Enter:rk_hifi_hw_params, 178, pll_out/div/params_rate(params) = 64 | |
<7>[ 149.750203] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0) | |
<6>[ 149.778540] binder: 99:1256 transaction failed 29189, size 72-0 | |
<4>[ 149.801569] rk_sensor_power on:0, 1636 | |
<4>[ 149.801710] rk_sensor_ioctrl on:1 | |
<4>[ 149.801795] rk_sensor_ioctrl Cam_Reset | |
<4>[ 149.801878] rk_sensor_ioctrl on:1 | |
<4>[ 149.801955] rk_sensor_ioctrl Cam_PowerDown | |
<4>[ 149.802037] rk_sensor_ioctrl on:0 | |
<4>[ 149.802106] rk_sensor_ioctrl Cam_Mclk | |
<4>[ 149.802237] rk_sensor_ioctrl on:0 | |
<4>[ 149.802472] rk_sensor_ioctrl Cam_Power | |
<4>[ 149.802577] ret: 0 | |
<4>[ 149.803246] rk616_codec_power_up : power up playback | |
<4>[ 149.824829] SensorPwrSeq-power: 0 | |
<4>[ 153.148149] rk616_codec_power_down : power down playback | |
<6>[ 169.088795] DWC_OTG: ********vbus detect********************************************* | |
<6>[ 169.278060] DWC_OTG: ********soft connect!!!***************************************** | |
<6>[ 169.284066] DWC_OTG: USB SUSPEND | |
<6>[ 169.405980] DWC_OTG: USB RESET | |
<6>[ 169.519774] android_work: sent uevent USB_STATE=CONNECTED | |
<6>[ 169.521653] DWC_OTG: USB RESET | |
<6>[ 169.650942] android_usb gadget: high speed config #1: android | |
<6>[ 169.651359] android_work: sent uevent USB_STATE=CONFIGURED | |
<6>[ 169.678170] mtp_open |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment