Example APRS iGate configuration

aprx.conf

mycall  LY2EN-3
myloc lat 5443.45N lon 02517.30E

<aprsis>
	passcode -1
	server   euro.aprs2.net
	heartbeat-timeout 1m
</aprsis>
<logging>
	pidfile /var/run/aprx.pid
	rflog /var/log/aprx/aprx-rf.log
	aprxlog /var/log/aprx/aprx.log
	erlangfile /var/run/aprx.state
</logging>
<interface>
    ax25-device   $mycall
    tx-ok	true
    telem-to-is   true
</interface>
<beacon>
	beaconmode both
	cycle-size  20m
	beacon symbol "I#" $myloc comment "iGate+Digi 144.8 MHz (Arduino + TNC)"
</beacon>
<beacon>
	beaconmode both
	cycle-size 15m
	beacon raw ";145.75VLN*111111z5443.89N/02515.73ErT186 R50k Repeater / LY0RVN"
</beacon>
<digipeater>
    transmitter     $mycall
    ratelimit      60 120      
    srcratelimit   10 20   
    <source>
       source         $mycall
       relay-type    digipeated 
       viscous-delay  0     
       ratelimit      60 120
    </source>
    <source>                # APRSIS source adds a TX-IGATE behaviour
       source        APRSIS
       relay-type    third-party 
       viscous-delay  5    
       ratelimit      60 120 
    via-path		WIDE2-1  
    msg-path		WIDE2-1  
    </source>
</digipeater>