kaysond

#usage "<b>DXFimport</b> V2.1<p>"
       "This ULP can import DXF files that include polylines.<br>"
       "Browse to the DXF file, setup your origins, input units, scale factor and linewidth then click convert. "
       "The ULP will then show you the script in case you want to change the layer the input will be written to.<br>"
       "Tested in version 5, 6, 7, and Autodesk EAGLE.<br><br>"
       "Command line syntax:<br> run import-dxf.ulp filename TargetLayer Units [options]<br><br>"
       "TargetLayer is number from 1-255 that corresponds to the layer that you want the imported features to be drawn on."
       "If TargetLayer is set to  '0 MultiLayer', StartLayer is a number from 1-255 that corresponds to the first layer to be drawn on. Each different layer in the DXF will be drawn on subsequent EAGLE layers"
       "Units is a number where 0 means imperial units and 1 means metric units."
       "[options] contains 5 additional arguments that are optional and not required by default."

kaysond

#!/usr/bin/env bash
#You'll need to enable IPMI over lan in idrac first
#iDRAC Settings -> Network -> IPMI Settings
#Channel Privilege Level Limit needs to be Administrator
#You may want to create a dedicated username/pass with IPMI permission in iDRAC Settings -> User Authentication
IPMIHOST=idracip
IPMIUSER=username
IPMIPW=password
IPMIEK=0000000000000000000000000000000000000000