-
-
Save kennedy/11278351 to your computer and use it in GitHub Desktop.
| Location | Name | Frequency | Duplex | Offset | Tone | rToneFreq | cToneFreq | DtcsCode | DtcsPolarity | Mode | TStep | Skip | Comment | URCALL | RPT1CALL | RPT2CALL | DVCODE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 462.125000 | 0.000000 | TSQL | 88.5 | 69.3 | 023 | NN | FM | 5.00 | S | ||||||||
| 2 | 462.225000 | 0.000000 | 88.5 | 88.5 | 023 | NN | FM | 5.00 | S | |||||||||
| 3 | 462.325000 | 0.000000 | 88.5 | 88.5 | 023 | NN | FM | 5.00 | S | |||||||||
| 4 | 462.425000 | 0.000000 | TSQL | 88.5 | 103.5 | 023 | NN | FM | 5.00 | S | ||||||||
| 5 | 462.525000 | 0.000000 | TSQL | 88.5 | 114.8 | 023 | NN | FM | 5.00 | S | ||||||||
| 6 | 462.625000 | 0.000000 | TSQL | 88.5 | 127.3 | 023 | NN | FM | 5.00 | S | ||||||||
| 7 | 462.725000 | 0.000000 | TSQL | 88.5 | 136.5 | 023 | NN | FM | 5.00 | S | ||||||||
| 8 | 462.825000 | 0.000000 | TSQL | 88.5 | 162.2 | 023 | NN | FM | 5.00 | S | ||||||||
| 9 | 462.925000 | 0.000000 | DTCS | 88.5 | 88.5 | 023 | NN | FM | 5.00 | S | ||||||||
| 10 | 463.025000 | 0.000000 | DTCS | 88.5 | 88.5 | 051 | NN | FM | 5.00 | S | ||||||||
| 11 | 463.125000 | 0.000000 | DTCS | 88.5 | 88.5 | 125 | NN | FM | 5.00 | S | ||||||||
| 12 | 463.225000 | 0.000000 | DTCS | 88.5 | 88.5 | 155 | RR | FM | 5.00 | S | ||||||||
| 13 | 463.525000 | 0.000000 | DTCS | 88.5 | 88.5 | 465 | RR | FM | 5.00 | S | ||||||||
| 14 | 450.225000 | 0.000000 | DTCS | 88.5 | 88.5 | 023 | NN | FM | 5.00 | S | ||||||||
| 15 | 460.325000 | 0.000000 | 88.5 | 88.5 | 023 | NN | FM | 5.00 | S | |||||||||
| 16 | 469.950000 | 0.000000 | TSQL | 88.5 | 203.5 | 023 | NN | FM | 5.00 | S |
Let me start by saying, “Yes” I have read this and other posts. It is not my intent to violate the FCC’s laws/rules. But, being an analytical type of person, I need to know the “Why”.
I have a few Baofeng BF8888s. I used the latest version of CHIRP Next to pull the channel list off the 888s.
I have a Baofeng GT-5TP. I learned you can program the GT-5TP using CHIRP by setting the type of radio to UV-82HP. I have been able to pull the programming table off and reload it. No problem
I loaded the 888s frequencies onto my GT-5TP. Again, I trying to figure out the “WHY”.
I can hear some of the channels on the GT-5TP when I transmit on my 888, but not all of them. WHY? Also, I can’t hear anything on my 888 if I transmit from the GT-5TP. It is as if it is not transmitting at all. When I push the PPT button I don’t get the orange transmitting light. Did I miss a configuration somewhere? Or is the GT-5TP built so that it cannot transmit on FRS/GMRA channels to be compliant with the FCC rules? Again, I do not intend to use the GT-5TP unlawfully. This is purely academic. Does anyone have any ideas?
I loaded the 888s frequencies onto my GT-5TP. Again, I trying to figure out the “WHY”. I can hear some of the channels on the GT-5TP when I transmit on my 888, but not all of them. WHY? Also, I can’t hear anything on my 888 if I transmit from the GT-5TP. It is as if it is not transmitting at all. When I push the PPT button I don’t get the orange transmitting light. Did I miss a configuration somewhere? Or is the GT-5TP built so that it cannot transmit on FRS/GMRA channels to be compliant with the FCC rules? Again, I do not intend to use the GT-5TP unlawfully. This is purely academic. Does anyone have any ideas?
Hello there. After checking the GT-5TP specs it says "Frequency Range: VHF 144-148MHz (TX/RX); UHF: 420-450MHz(TX/RX)".
Could this be purely a hardware issue on the GT-5TP side of things? None of the 888s listed frequencies are within the 420-450 range.
Let me start by saying, “Yes” I have read this and other posts. It is not my intent to violate the FCC’s laws/rules. But, being an analytical type of person, I need to know the “Why”. I have a few Baofeng BF8888s. I used the latest version of CHIRP Next to pull the channel list off the 888s.
I have a Baofeng GT-5TP. I learned you can program the GT-5TP using CHIRP by setting the type of radio to UV-82HP. I have been able to pull the programming table off and reload it. No problem
I loaded the 888s frequencies onto my GT-5TP. Again, I trying to figure out the “WHY”. I can hear some of the channels on the GT-5TP when I transmit on my 888, but not all of them. WHY? Also, I can’t hear anything on my 888 if I transmit from the GT-5TP. It is as if it is not transmitting at all. When I push the PPT button I don’t get the orange transmitting light. Did I miss a configuration somewhere? Or is the GT-5TP built so that it cannot transmit on FRS/GMRA channels to be compliant with the FCC rules? Again, I do not intend to use the GT-5TP unlawfully. This is purely academic. Does anyone have any ideas?
I finally figured it out. The GT-5TP sold in the USA has a software block. The only way to use the above-listed frequencies is to jailbreak the phone back to default. So, in theory, if you revert to the original default you can transmit on the above-listed channels.
Regards,
anyone know the frequencies of vertel team talkie channels , need to connect with my uv5r please guide me.
Hi may know who have correct file to clone from BF-888S to UV-82 , Thanks.
Thanks for this