iTerm2 + Oh My Zsh + Solarized color scheme + Source Code Pro Powerline + Font Awesome + [Powerlevel10k] - (macOS)

iterm2-solarized.md

Default

Powerlevel10k

iterm2-solarized_instructions.md

How to install

iTerm2

brew install --cask iterm2

Or, if you do not have homebrew (you should ;)): Download and install iTerm2

iTerm2 has better color fidelity than the built in Terminal, so your themes will look better.

Get the iTerm color settings

• Solarized Dark theme (patched version to fix the bright black value)
• Solarized Light theme
• More themes @ iterm2colorschemes

Just save it somewhere and open the file(s). The color settings will be imported into iTerm2. Apply them in iTerm through iTerm → preferences → profiles → colors → load presets. You can create a different profile other than Default if you wish to do so.

Oh My Zsh

More info here: https://github.com/robbyrussell/oh-my-zsh

Install with curl

sh -c "$(curl -fsSL https://raw.githubusercontent.com/robbyrussell/oh-my-zsh/master/tools/install.sh)"

When the installation is done, edit ~/.zshrc and set ZSH_THEME="agnoster" for the default look. Or better yet, go for Powerlevel10k.

Powerlevel9k / Powerlevel10k

Why Powerlevel10k? Well, because it's a drop-in replacement for Powerlevel9k, just a lot faster to render your prompt. ls feels fast again!

So if you prefer the Powerlevel10k look with added info such as exit codes and timestamps on the right, run:

git clone https://github.com/romkatv/powerlevel10k.git $ZSH_CUSTOM/themes/powerlevel10k

Then edit your ~/.zshrc and set ZSH_THEME="powerlevel10k/powerlevel10k". Once you do so, when you start a new terminal session, the Powerlevel10 configure wizard will be launched to set your prompt, beware, there are many many options!

Powerlevel10k offers a whole lot more and is extremely configurable, best is to check its project page.

If you want to trigger the configuration wizard immediately, simply run p10k configure to discover all options, which are plentiful.

Install a patched font

If you did not go with Powerlevel10k or you want another font, read on:

• Source Code Pro
• Source Code Pro + Font Awesome, this one is needed if you want the icons from Font Awesome as shown in the screenshot for Powerlevel10k.
• Others @ powerline fonts

Open the downloaded font and press "Install Font".

Set this font in iTerm2 (iTerm → Preferences → Profiles → Text → Font), in the dropdown select the desired Font. You will see it change on the fly.

Restart iTerm2 for all changes to take effect.

Further tweaking

Things like

• auto suggestions
• word jumping with arrow keys / natural text editing
• syntax highlighting
• visual studio code config

can be found in the section below.

Auto suggestions (for Oh My Zsh)

Just follow these steps: https://github.com/zsh-users/zsh-autosuggestions/blob/master/INSTALL.md#oh-my-zsh

If the auto suggestions do not appear to show, it could be a problem with your color scheme. Under "iTerm → Preferences → Profiles → Colors tab", check the value of Black Bright, that is the color your auto suggestions will have. It will be displayed on top of the Background color. If there is not enough contrast between the two, you won't see the suggestions even if they're actually there..

Enable word jumps and word deletion, aka natural text selection

By default, word jumps (option + → or ←) and word deletions (option + backspace) do not work. To enable these, go to "iTerm → Preferences → Profiles → Keys → Key mappings → Presets... → Natural Text Editing → Boom! Head explodes"

Syntax highlighting

Clone the repository:

git clone https://github.com/zsh-users/zsh-syntax-highlighting.git ${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-syntax-highlighting

Activate the plugin in ~/.zshrc:

plugins=( [plugins...] zsh-syntax-highlighting)

Restart iTerm2 for all changes to take effect.

Visual Studio Code config

Installing a patched font will mess up the integrated terminal in VS Code unless you use the proper settings. You'll need to go to settings (CMD + ,) and add or edit the following values:

• for Source Code Pro + Font Awesome: "terminal.integrated.fontFamily": "'SourceCodePro+Powerline+Awesome Regular'". The single quotes are important! Restart VS Code after the config change.
• for Source Code Pro: "terminal.integrated.fontFamily": "Source Code Pro for Powerline"
• for Meslo: "terminal.integrated.fontFamily": "Meslo LG M for Powerline"
• for other fonts you'll need to check the font name in Font Book. You can right click on them on select "Show in Finder" to get the exact name.

You can also set the fontsize e.g.: "terminal.integrated.fontSize": 14

In the screenshots "Desktop" and "OneDrive" are symbolic links, but the rest is my local home, so everything should be accessible.

Is there any way I can edit the text displaying before the prompt?
I used to have a export PS1="%n@%d $ " defined in my old .zshrc. Any tips on how to get the same display text using oh-my-zsh??

@jbantony Remove any line from .zshrc that mentions "p10k", "powerlevel10k" or "ZSH_THEME". Then add PS1='%n@%d $ ' (without the export).

pls sir how can i install item 2 on windows cause i'm not getting it sir

You cannot install iTerm2 on Windows.

getting this error
➜ ~
iconv: conversion from -t unsupported
iconv: try 'iconv -l' to get the list of supported encodings
Error converting string from to UTF-8
➜ ~
iconv: conversion from -t unsupported
iconv: try 'iconv -l' to get the list of supported encodings
Error converting string from to UTF-8
➜ ~

@Gbolahan284 : It is for MacOS

yes. for MacOS

Hello, I found some update before and my terminal just like on the screenshot.

Why its like "⇣4 +5 !3 ?50" ? Before update, its normal.

Hello, I found some update before and my terminal just like on the screenshot.

Why its like "⇣4 +5 !3 ?50" ? Before update, its normal.

@dante4rt, can you share your setup for the prompt?

Why its like "⇣4 +5 !3 ?50" ? Before update, its normal.

@dante4rt See https://github.com/romkatv/powerlevel10k#what-do-different-symbols-in-git-status-mean

I don't know why but after I finished the setup, when I use command ls my directories are displated unevenly

@BaloneyBoy97 That's normal. ls prints files in columns. Try running it in a directory with more files to see it.

This is dope, thanks a lot. Just FYI, I had an issue with setting up the fontFamily for VS Code, it kept breaking but eventually added this "MesloLGS NF" and downloaded the font files manually as cause some of them did not load. And it worked without even reloading the app.

I saw it in the the powerlevel10K repo Also has links to fonts

Hi, Any idea how to change the "ok" to "tick" ?

@wcpoon Run p10k configure and select UNICODE instead of ASCII. If you don't see this option, check https://github.com/romkatv/powerlevel10k/tree/master#some-prompt-styles-are-missing-from-the-configuration-wizard

Hello my friend I'm so busy now and I don't have any idea for that subject yet

…

On Fri, Nov 10, 2023, 18:37 Roman Perepelitsa ***@***.***> wrote: ***@***.**** commented on this gist. ------------------------------ @wcpoon <https://github.com/wcpoon> Run p10k configure and select UNICODE instead of ASCII. If you don't see this option, check https://github.com/romkatv/powerlevel10k/tree/master#some-prompt-styles-are-missing-from-the-configuration-wizard — Reply to this email directly, view it on GitHub <https://gist.github.com/kevin-smets/8568070#gistcomment-4756662> or unsubscribe <https://github.com/notifications/unsubscribe-auth/AEDGFNCVQBYFTA6D7DQPSODYDY7KTBFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFQKSXMYLMOVS2I5DSOVS2I3TBNVS3W5DIOJSWCZC7OBQXE5DJMNUXAYLOORPWCY3UNF3GS5DZVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFU44DKNRYGA3TBJ3UOJUWOZ3FOKTGG4TFMF2GK> . You are receiving this email because you are subscribed to this thread. Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub> .

Wow, that's solid man. I love Powerlevel10k so much already after 10mins of using it. ❤️

hey bros please send same theme for windows computers

because this theme is very different for windows system.

why do I have a git written instead of a picture octocat?

@Prrromanssss The GitHub logo is displayed when you are on a branch with a remote on github.com. In your git repository the branch "main" either does not have a remote or it's not on github.com.

@romkatv
Oh, I got it, thanks!!!

I successfully installed self-suggestion, but it recommends letter by letter, not word suggestion.

I use WebStorm and the icons are not showing. How do I fix it? Many Thanks

I use WebStorm and the icons are not showing. How do I fix it? Many Thanks

You need to download font and apply terminal font.

Hi,
Any ideas how to completely uninstall iterm2 on a macbook pro.Already tried moving from applications to trash and emptying trash + restarting but it appears some residual settings still there.Require a brand new clean install.

@Chris7V , I believe there are settings for iTerm2 stored somewhere in /Library on the Mac, per my apple support person. I had to reinstall iterm2 yesterday and all my settings were magically there. That directory is locked to me so I can't investigate further.