Created
April 2, 2017 19:25
-
-
Save keyz182/a13feac565a1e8b9eef555666510d386 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # generated by Slic3r 1.2.9 on Sun Apr 2 20:25:14 2017 | |
| [filament:My Settings] | |
| bed_temperature = 0 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| extrusion_multiplier = 2.5 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 60 | |
| filament_colour = #FFFFFF | |
| filament_diameter = 1.75 | |
| first_layer_bed_temperature = 0 | |
| first_layer_temperature = 200 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 5 | |
| temperature = 200 | |
| [presets] | |
| filament = My Settings.ini | |
| print = Single Extruder Mode.ini | |
| printer = Single Extruder Mode.ini | |
| [print:Dual Extruder Mode] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 100 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 50% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = honeycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 75% | |
| first_layer_speed = 30 | |
| gap_fill_speed = 60 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 75 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 1 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 35 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 6 | |
| skirt_height = 1 | |
| skirts = 4 | |
| small_perimeter_speed = 30% | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 75% | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 2 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 80 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 50% | |
| top_solid_layers = 3 | |
| travel_speed = 130 | |
| xy_size_compensation = 0 | |
| [print:Single Extruder Mode] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 100 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 50% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = honeycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 75% | |
| first_layer_speed = 30 | |
| gap_fill_speed = 60 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 75 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 1 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 35 | |
| perimeters = 5 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 6 | |
| skirt_height = 1 | |
| skirts = 4 | |
| small_perimeter_speed = 30% | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 75% | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 80 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 50% | |
| top_solid_layers = 3 | |
| travel_speed = 130 | |
| xy_size_compensation = 0 | |
| [printer:Dual Extruder Mode] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n | |
| extruder_offset = 0x0,0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.4,0.4 | |
| octoprint_apikey = | |
| octoprint_host = | |
| pressure_advance = 0 | |
| retract_before_travel = 2,2 | |
| retract_layer_change = 1,1 | |
| retract_length = 2,2 | |
| retract_length_toolchange = 10,10 | |
| retract_lift = 0,0 | |
| retract_restart_extra = 0,0 | |
| retract_restart_extra_toolchange = 0,0 | |
| retract_speed = 40,40 | |
| start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 0,0 | |
| z_offset = 0 | |
| [printer:My Settings] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.4 | |
| octoprint_apikey = | |
| octoprint_host = | |
| pressure_advance = 0 | |
| retract_before_travel = 2 | |
| retract_layer_change = 1 | |
| retract_length = 2 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 40 | |
| start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = 0 | |
| [printer:Single Extruder Mode] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.4 | |
| octoprint_apikey = | |
| octoprint_host = | |
| pressure_advance = 0 | |
| retract_before_travel = 2 | |
| retract_layer_change = 1 | |
| retract_length = 2 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 40 | |
| start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = 0 | |
| [settings] | |
| autocenter = 1 | |
| mode = simple |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment