-
-
Save killerbees19/6e5d396ec8f51b7089cb4d2273817e6a to your computer and use it in GitHub Desktop.
Huawei E3372h-153
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Working Huawei E3372h-153 SETPORT mappings | |
replacing A1,A2 with FF turns off need for usb_modeswitch | |
AT^SETPORT="A1,A2;12,1,16,A1,A2" | |
^GETPORTMODE: TYPE: WCDMA: huawei,PCUI:0,MDM:1,NDIS:2,CDROM:3,SD:4, | |
AT^SETPORT="A1,A2;1,12,16,A1,A2" | |
^GETPORTMODE: TYPE: WCDMA: huawei,MDM:0,PCUI:1,NDIS:2,CDROM:3,SD:4, | |
AT^SETPORT="A1,A2;10,12,16,A1,A2" | |
^GETPORTMODE: TYPE: WCDMA: huawei,MDM:0,PCUI:1,NDIS:2,CDROM:3,SD:4, | |
AT^SETPORT="FF;10,12,16" | |
^GETPORTMODE: TYPE: WCDMA: huawei,MDM:0,PCUI:1,NDIS:2, | |
AT^SETPORT="FF;5,10,12,16" | |
^GETPORTMODE: TYPE: WCDMA: huawei,GPS:0,MDM:1,PCUI:2,NDIS:3, | |
AT^SETPORT="FF;12,16" | |
^GETPORTMODE: TYPE: WCDMA: huawei,PCUI:0,NDIS:1, | |
AT^SETPORT="FF;10,12,16,5,A" | |
^GETPORTMODE: TYPE: WCDMA: huawei,MDM:0,PCUI:1,NDIS:2,GPS:3,BT:4, | |
this seems to work with windows mobile partner | |
AT^SETPORT="FF;12,10,16" | |
^GETPORTMODE: TYPE: WCDMA: huawei,PCUI:0,MDM:1,NDIS:2, | |
ndis connection on PCUI port, couln't get this to work | |
AT^NDISDUP=1,1,"4g.tele2.ee" | |
AT^DHCP? | |
ATI - display information about the modem and imei | |
AT + CLAC - list of supported commands | |
AT ^ FHVER - Check software version and modem | |
AT ^ VERSION? - Firmware version | |
AT ^ CARDLOCK? - Check the status of a modem lock and the number of attempts to enter the unlock code: | |
CONNECT response: CARDLOCK: A, B, 0 | |
A = 2 the modem is enabled | |
A = 1 modem is locked - SimLock | |
A = 3, you used up all 10 attempts to enter the code | |
B - number of remaining attempts to enter the unlock code (default is 10) | |
AT ^ CARDLOCK = "unlock code" - enter the unlock code (8 digits) | |
AT + CSQ - View the signal strength | |
AT ^ SYSINFOEX - which network in the currently logged modem | |
AT ^ SETPORT =? - Mapping of possible port configurations | |
AT ^ SETPORT? - Displays the current port configuration | |
AT ^ SETPORT = "combination" - switch ports required in combination, for example, AT ^ SETPORT = "A1, A2; 10,12,16, A1, A2" | |
AT ^ RESET - reboot of the modem (needed after SETPORT) | |
alot of info about this and kinda similar E3372s modem http://4pda.ru/forum/index.php?showtopic=582284&st=600 | |
non hilink firmware https://3ginfo.ru/downloads1431.html because hilink sucks for advanced things | |
some more info http://habrahabr.ru/post/233007/ | |
my modem flash code | |
Flash 64928896 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment