Last active
February 9, 2024 10:35
-
-
Save kingargyle/f919e3543fd75bab4190a64f5eb67b9f to your computer and use it in GitHub Desktop.
Prusa Slicer Anycubic Kobra Neo
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| M117 Cooling down... | |
| M104 S0 ; turn off extruder | |
| M107 ; Fan off | |
| M140 S0; Turn bed off | |
| M84 ; disable motors | |
| G91 ;relative positioning | |
| G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure | |
| G1 Z+0.5 E-5 ;X-20 Y-20 F240 ;move Z up a bit and retract filament even more | |
| G28 X0 ;move X to min endstops, so the head is out of the way | |
| G90 ;Absolute positionning | |
| G1 Y200 F3000 ;Present print | |
| M84 ;steppers off | |
| M300 P300 S4000 | |
| M117 Finished |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # generated by PrusaSlicer 2.5.0+linux-x64-GTK2 on 2023-01-08 at 19:36:43 UTC | |
| [print:Anycubic Kobra neo] | |
| avoid_crossing_perimeters = 0 | |
| avoid_crossing_perimeters_max_detour = 0 | |
| bottom_fill_pattern = monotonic | |
| bottom_solid_layers = 3 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 0 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_separation = 0 | |
| brim_type = outer_only | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| draft_shield = disabled | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 0 | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 50% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = stars | |
| first_layer_acceleration = 0 | |
| first_layer_acceleration_over_raft = 0 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.35 | |
| first_layer_speed = 30 | |
| first_layer_speed_over_raft = 30 | |
| fuzzy_skin = none | |
| fuzzy_skin_point_dist = 0.8 | |
| fuzzy_skin_thickness = 0.3 | |
| gap_fill_enabled = 1 | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| gcode_label_objects = 0 | |
| gcode_resolution = 0.0125 | |
| gcode_substitutions = | |
| infill_acceleration = 0 | |
| infill_anchor = 600% | |
| infill_anchor_max = 50 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 80 | |
| inherits = | |
| interface_shells = 0 | |
| ironing = 0 | |
| ironing_flowrate = 15% | |
| ironing_spacing = 0.1 | |
| ironing_speed = 15 | |
| ironing_type = top | |
| layer_height = 0.3 | |
| max_print_speed = 80 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_bead_width = 85% | |
| min_feature_size = 25% | |
| min_skirt_length = 0 | |
| mmu_segmented_region_max_width = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_generator = arachne | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| print_settings_id = | |
| raft_contact_distance = 0.1 | |
| raft_expansion = 1.5 | |
| raft_first_layer_density = 90% | |
| raft_first_layer_expansion = 3 | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 6 | |
| skirt_height = 1 | |
| skirts = 1 | |
| slice_closing_radius = 0.049 | |
| slicing_mode = regular | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 20 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_auto = 1 | |
| support_material_bottom_contact_distance = 0 | |
| support_material_bottom_interface_layers = -1 | |
| support_material_buildplate_only = 0 | |
| support_material_closing_radius = 2 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_pattern = rectilinear | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_style = grid | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 0 | |
| support_material_with_sheath = 1 | |
| support_material_xy_spacing = 50% | |
| thick_bridges = 1 | |
| thin_walls = 1 | |
| threads = 4 | |
| top_fill_pattern = monotonic | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 15 | |
| top_solid_layers = 3 | |
| top_solid_min_thickness = 0 | |
| travel_speed = 130 | |
| travel_speed_z = 0 | |
| wall_distribution_count = 1 | |
| wall_transition_angle = 10 | |
| wall_transition_filter_deviation = 25% | |
| wall_transition_length = 100% | |
| wipe_tower = 0 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_brim_width = 2 | |
| wipe_tower_no_sparse_layers = 0 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 180 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:Anycubic Kobra neo 0.12 -Gambody] | |
| avoid_crossing_perimeters = 1 | |
| avoid_crossing_perimeters_max_detour = 0 | |
| bottom_fill_pattern = rectilinear | |
| bottom_solid_layers = 5 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 0 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_separation = 0 | |
| brim_type = outer_only | |
| brim_width = 10 | |
| clip_multipart_objects = 0 | |
| compatible_printers = | |
| compatible_printers_condition = | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| draft_shield = disabled | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 0 | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 50% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 8% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_acceleration_over_raft = 0 | |
| first_layer_extrusion_width = 0.45 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 30 | |
| first_layer_speed_over_raft = 30 | |
| fuzzy_skin = none | |
| fuzzy_skin_point_dist = 0.8 | |
| fuzzy_skin_thickness = 0.3 | |
| gap_fill_enabled = 1 | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| gcode_label_objects = 0 | |
| gcode_resolution = 0.0125 | |
| gcode_substitutions = | |
| infill_acceleration = 0 | |
| infill_anchor = 600% | |
| infill_anchor_max = 50 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 80 | |
| inherits = | |
| interface_shells = 0 | |
| ironing = 0 | |
| ironing_flowrate = 15% | |
| ironing_spacing = 0.1 | |
| ironing_speed = 15 | |
| ironing_type = top | |
| layer_height = 0.12 | |
| max_print_speed = 80 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_bead_width = 85% | |
| min_feature_size = 25% | |
| min_skirt_length = 0 | |
| mmu_segmented_region_max_width = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = KOBRA_[input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_generator = arachne | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| print_settings_id = | |
| raft_contact_distance = 0.1 | |
| raft_expansion = 1.5 | |
| raft_first_layer_density = 90% | |
| raft_first_layer_expansion = 3 | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 5 | |
| skirt_height = 1 | |
| skirts = 2 | |
| slice_closing_radius = 0.049 | |
| slicing_mode = regular | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 20 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_auto = 0 | |
| support_material_bottom_contact_distance = 0 | |
| support_material_bottom_interface_layers = -1 | |
| support_material_buildplate_only = 0 | |
| support_material_closing_radius = 2 | |
| support_material_contact_distance = 0.25 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 2 | |
| support_material_interface_pattern = rectilinear | |
| support_material_interface_spacing = 0.25 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 3 | |
| support_material_speed = 60 | |
| support_material_style = snug | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 3 | |
| support_material_with_sheath = 1 | |
| support_material_xy_spacing = 50% | |
| thick_bridges = 1 | |
| thin_walls = 1 | |
| threads = 4 | |
| top_fill_pattern = rectilinear | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 15 | |
| top_solid_layers = 5 | |
| top_solid_min_thickness = 0 | |
| travel_speed = 100 | |
| travel_speed_z = 0 | |
| wall_distribution_count = 1 | |
| wall_transition_angle = 10 | |
| wall_transition_filter_deviation = 25% | |
| wall_transition_length = 100% | |
| wipe_tower = 0 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_brim_width = 2 | |
| wipe_tower_no_sparse_layers = 0 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 180 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:Anycubic Kobra neo 0.20 -Gambody] | |
| avoid_crossing_perimeters = 0 | |
| avoid_crossing_perimeters_max_detour = 0 | |
| bottom_fill_pattern = rectilinear | |
| bottom_solid_layers = 3 | |
| bottom_solid_min_thickness = 0 | |
| bridge_acceleration = 0 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_separation = 0 | |
| brim_type = outer_only | |
| brim_width = 10 | |
| clip_multipart_objects = 0 | |
| compatible_printers = | |
| compatible_printers_condition = | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| draft_shield = disabled | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 0 | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 50% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 10% | |
| fill_pattern = 3dhoneycomb | |
| first_layer_acceleration = 0 | |
| first_layer_acceleration_over_raft = 0 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 30 | |
| first_layer_speed_over_raft = 30 | |
| fuzzy_skin = none | |
| fuzzy_skin_point_dist = 0.8 | |
| fuzzy_skin_thickness = 0.3 | |
| gap_fill_enabled = 1 | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| gcode_label_objects = 0 | |
| gcode_resolution = 0.0125 | |
| gcode_substitutions = | |
| infill_acceleration = 0 | |
| infill_anchor = 600% | |
| infill_anchor_max = 50 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 80 | |
| inherits = | |
| interface_shells = 0 | |
| ironing = 0 | |
| ironing_flowrate = 15% | |
| ironing_spacing = 0.1 | |
| ironing_speed = 15 | |
| ironing_type = top | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_bead_width = 85% | |
| min_feature_size = 25% | |
| min_skirt_length = 0 | |
| mmu_segmented_region_max_width = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = KOBRA_[input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_generator = arachne | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| print_settings_id = | |
| raft_contact_distance = 0.1 | |
| raft_expansion = 1.5 | |
| raft_first_layer_density = 90% | |
| raft_first_layer_expansion = 3 | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 5 | |
| skirt_height = 1 | |
| skirts = 2 | |
| slice_closing_radius = 0.049 | |
| slicing_mode = regular | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 20 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_auto = 1 | |
| support_material_bottom_contact_distance = 0 | |
| support_material_bottom_interface_layers = -1 | |
| support_material_buildplate_only = 0 | |
| support_material_closing_radius = 2 | |
| support_material_contact_distance = 0.25 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 2 | |
| support_material_interface_pattern = rectilinear | |
| support_material_interface_spacing = 0.25 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 3 | |
| support_material_speed = 60 | |
| support_material_style = snug | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 3 | |
| support_material_with_sheath = 1 | |
| support_material_xy_spacing = 50% | |
| thick_bridges = 1 | |
| thin_walls = 1 | |
| threads = 4 | |
| top_fill_pattern = rectilinear | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 15 | |
| top_solid_layers = 3 | |
| top_solid_min_thickness = 0 | |
| travel_speed = 130 | |
| travel_speed_z = 0 | |
| wall_distribution_count = 1 | |
| wall_transition_angle = 10 | |
| wall_transition_filter_deviation = 25% | |
| wall_transition_length = 100% | |
| wipe_tower = 0 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_brim_width = 2 | |
| wipe_tower_no_sparse_layers = 0 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 180 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [printer:Anycubic Kobra neo] | |
| bed_custom_model = | |
| bed_custom_texture = | |
| bed_shape = 0x0,220x0,220x220,0x220 | |
| before_layer_gcode = | |
| between_objects_gcode = | |
| color_change_gcode = M600 | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = | |
| default_print_profile = | |
| deretract_speed = 0 | |
| end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM107 ; Fan off\nM84 ; disable motors\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F240 ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished\n | |
| extra_loading_move = -2 | |
| extruder_colour = "" | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin2 | |
| high_current_on_filament_swap = 0 | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = | |
| machine_limits_usage = time_estimate_only | |
| machine_max_acceleration_e = 10000,5000 | |
| machine_max_acceleration_extruding = 1500,1250 | |
| machine_max_acceleration_retracting = 1500,1250 | |
| machine_max_acceleration_travel = 1500,1250 | |
| machine_max_acceleration_x = 9000,1000 | |
| machine_max_acceleration_y = 9000,1000 | |
| machine_max_acceleration_z = 500,200 | |
| machine_max_feedrate_e = 120,120 | |
| machine_max_feedrate_x = 500,200 | |
| machine_max_feedrate_y = 500,200 | |
| machine_max_feedrate_z = 12,12 | |
| machine_max_jerk_e = 2.5,2.5 | |
| machine_max_jerk_x = 10,10 | |
| machine_max_jerk_y = 10,10 | |
| machine_max_jerk_z = 0.2,0.4 | |
| machine_min_extruding_rate = 0,0 | |
| machine_min_travel_rate = 0,0 | |
| max_layer_height = 0 | |
| max_print_height = 250 | |
| min_layer_height = 0.07 | |
| nozzle_diameter = 0.4 | |
| parking_pos_retraction = 92 | |
| pause_print_gcode = M601 | |
| print_host = | |
| printer_model = | |
| printer_notes = | |
| printer_settings_id = | |
| printer_technology = FFF | |
| printer_variant = | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 0 | |
| retract_before_travel = 2 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 0 | |
| retract_length = 2 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_lift_above = 0 | |
| retract_lift_below = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 35 | |
| silent_mode = 1 | |
| single_extruder_multi_material = 0 | |
| start_gcode = G21 ;metric values\n\nG90 ;absolute positioning\n\nM82 ;set extruder to absolute mode\n\nM107 ;start with the fan off\n\nM117 Homing X/Y ...\n\nG28 X0 Y0 ;move X/Y to min endstops\n\nM117 Homing Z ...\n\nG28 Z0 ;move Z to min endstops\n\nG1 Z15.0 F240 ;move the platform down 15mm\n\nM117 Heating ...\n\nM104 S[first_layer_temperature]\n\n; set extruder temp\n\nM109 S[first_layer_temperature]\n\n; wait for extruder temp\n\nM117 Start cleaning ...\nM420 S1 ; Enable Bed Levelling Mesh\nG92 E0 ;zero the extruded length\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM420 S1 ; Enable Bed Levelling Mesh\nM117 Printing... | |
| template_custom_gcode = | |
| thumbnails = | |
| thumbnails_format = PNG | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 0 | |
| z_offset = 0 | |
| [presets] | |
| print = Anycubic Kobra neo 0.12 -Gambody | |
| sla_print = 0.025 UltraDetail | |
| sla_material = | |
| printer = Anycubic Kobra neo | |
| filament = PLA Kobra Neo | |
| physical_printer = |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| G21 ;metric values | |
| G90 ;absolute positioning | |
| M82 ;set extruder to absolute mode | |
| M107 ;start with the fan off | |
| M117 Homing X/Y ... | |
| G28 X0 Y0 ;move X/Y to min endstops | |
| M117 Homing Z ... | |
| G28 Z0 ;move Z to min endstops | |
| G1 Z15.0 F240 ;move the platform down 15mm | |
| M117 Heating ... | |
| M104 S[first_layer_temperature] | |
| ; set extruder temp | |
| M109 S[first_layer_temperature] | |
| ; wait for extruder temp | |
| M117 Start cleaning ... | |
| M420 S1 ; Enable Bed Levelling Mesh | |
| G92 E0 ;zero the extruded length | |
| M117 Intro line ... | |
| G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed | |
| G1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position | |
| G1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line | |
| G1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little | |
| G1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line | |
| G92 E0 ; Reset Extruder | |
| G1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish | |
| G92 E0 ; Reset Extruder | |
| M420 S1 ; Enable Bed Levelling Mesh | |
| M117 Printing... |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment