A simple Powershell script that monitors a remote hosts connection. Loops constantly reporting to the screen when the status changes. Optionally also records to the event log, makes an audible beep, and/or sends emails.

Start-Monitoring.ps1

<#
.SYNOPSIS
    Tests the connection to the supplied host or IP and reports back on changes to its status.
.DESCRIPTION
    This script will check the connection to the supplied hostname or IP address every 5 second's to 
    monitor its status. If the status changes, a message is recorded, the Eventlog is update (optional), and an email is sent
    to a supplied email address (optional).

    If a TCPPort parameter is suppied the script will attempt to connect to this port. Otherwise a simple ICMP Ping is used.

    To end monitoring, press CTRL-C
.PARAMETER RemoteHost
    A String specifying host or IP address you'd like to monitor. You can also specify a TCPport here using host:port syntax.
.PARAMETER EmailAddress
    A String specifying the email address to notify of status changes. If not supplied, or empty, emails are not sent.

    In order to use this, first edit the script to supply a valid SMTP server, port, and from address.
.PARAMETER EventLog
    If true, status changes are also recorded in the Windows Application EventLog.

    In order to use this, first run this command at an Administrator Powershell Prompt:
     > New-EventLog -LogName Application -Source MonitoringConnection
.PARAMETER NoNotify
    If true, status changes will not show up as Windows notifications.
.PARAMETER Silent
    If true, the script will not create any beeps as the status changes.
.PARAMETER Pause
    The number of seconds to wait between tests. Default 5 seconds.
.PARAMETER TCPPort
    If supplied, the script will test a connection to the supplied TCP port. If not supplied a ICMP Ping test is used.
.PARAMETER Namespace
    If supplied, the script will run a query on this WMI Namespace on the supplied Host
.PARAMETER Class
    If supplied, the script will run a query on this WMI Class of the supplied namespace on the supplied Host
.PARAMETER WMIProperty
    The WMI Property to monitor. Any changes in value will be reported
.PARAMETER WMIFilter
    The Filter used to identify the correct result in the WMI query.

.EXAMPLE
    ./Start-Monitoring google.com
.EXAMPLE
    ./Start-Monitoring -RemoteHost 8.8.8.8 -EmailAddress [email protected]
.EXAMPLE
    ./Start-Monitoring -RemoteHost 8.8.8.8 -EmailAddress [email protected] -EventLog $true
.EXAMPLE
    ./Start-Monitoring -RemoteHost 8.8.8.8 -TCPPort 53
.EXAMPLE
    ./Start-Monitoring -RemoteHost 8.8.8.8:53
.EXAMPLE
    ./Start-Monitoring -RemoteHost @("www.google.com:443","8.8.8.8:53")
.EXAMPLE
    ./Start-Monitoring -RemoteHost WebServer1 -Namespace "root\cimv2" -Class Win32_PerfRawData_APPPOOLCountersProvider_APPPOOLWAS -WMIProperty CurrentApplicationPoolState -WMIFilter "{$_.Name -like 'SLSS'}"

.NOTES
  Version:        1.7
  Author:         Cameron McConnochie
  Creation Date:  12 June 2020
  Purpose/Change: Added support for host:port format to allow multiple host and port combos to monitor

  Version:        1.6
  Author:         Cameron McConnochie
  Creation Date:  16 Sept 2019
  Purpose/Change: Added support for an array of hosts to monitor

  Version:        1.5
  Author:         Cameron McConnochie
  Creation Date:  17 June 2019
  Purpose/Change: Added Core compatibility

  Version:        1.4
  Author:         Cameron McConnochie
  Creation Date:  22 March 2019
  Purpose/Change: Added WMI monitoring

  Version:        1.3
  Author:         Cameron McConnochie
  Creation Date:  26 Feb 2019
  Purpose/Change: Added Validation of the supplied hostname/IP

  Version:        1.2
  Author:         Cameron McConnochie
  Creation Date:  8 Oct 2018
  Purpose/Change: Added Notifications

  Version:        1.1
  Author:         Cameron McConnochie
  Creation Date:  10 Aug 2018
  Purpose/Change: Added TCP Port monitoring

  Version:        1.0
  Author:         Cameron McConnochie
  Creation Date:  26 July 2018
  Purpose/Change: Initial script development
#>

    [CmdletBinding()]
    Param(
        [Parameter(Mandatory=$True,Position=1)]
        [ValidateScript({
            if ($_ -like "*:*") {
                if($_.Split(":")[0] -As [IPAddress] -and $_.Split(":")[1] -As [Int]){
                    $True
                }else {
                    if(([System.Net.Dns]::GetHostEntry($_.Split(":")[0])) -and $_.Split(":")[1] -As [Int]){
                        $True
                    }else{
                        Throw "$($_) is not a valid IP or hostname. Try again."
                    }
                }
            } elseif($_ -As [IPAddress]){
                $True
            } else {
                if([System.Net.Dns]::GetHostEntry($_)){
                    $True
                }else{
                    Throw "$($_) is not a valid IP or hostname. Try again."
                }
            }
        })] 
        [string[]]$RemoteHost,

        [Parameter(Mandatory=$False)] 
        [ValidateScript({
            if($_ -Match "\b[A-Z0-9._%+-]+@[A-Z0-9.-]+\.[A-Z]{2,}\b" -or $_ -eq $null){
                $True
            } else {
                Throw "$($_) is not a valid email address. Try again, or remove this parameter to skip email alerts."
            }
        })] 
        [mailaddress]$EmailAddress = $null,

        [Parameter(Mandatory=$False)]
        [switch]$EventLog,

        [Parameter(Mandatory=$False)]
        [switch]$NoNotify,

        [Parameter(Mandatory=$False)]
        [switch]$Silent,

        [Parameter(Mandatory=$False)]
        [int32]$Pause = 5,

        [Parameter(Mandatory=$False,
        ParameterSetName = 'Port')]
        [int32]$TCPPort,

        [Parameter(Mandatory=$true,
        ParameterSetName = 'WMI')]
        [string]$Namespace,

        [Parameter(Mandatory=$true,
        ParameterSetName = 'WMI')]
        [string]$Class,

        [Parameter(Mandatory=$true,
        ParameterSetName = 'WMI')]
        [string]$WMIProperty,

        [Parameter(Mandatory=$False,
        ParameterSetName = 'WMI')]
        [scriptblock]$WMIFilter
    )

        ######
    #
    # SMTP Mail Server Settings, edit these values in order to use email alerts
    #
    ######
    $SMTPServer = "smtp.someopenmailserver.com"
    $SMTPPort = 25
    $SMTPFromAddress = "[email protected]"

    #Script Starts here...
    $RemoteHostStatus = 99 #1 = online, 2 = offline, 3 = undefined
    [string]$WMIPrevious = "99" #Used to identify changes

    #Error Check
    #Confirm EventLog Source is configured if required
    if($EventLog){
        try{
            [System.Diagnostics.EventLog]::SourceExists("MonitoringConnection") | Out-Null
        }catch{
            throw "In order to record to the EventLog, first run this command at an Administrator Powershell Prompt: `n`
            > New-EventLog -LogName Application -Source MonitoringConnection"
        }
    }
    if($EmailAddress -ne $null){
        if(-not ((Test-NetConnection -ComputerName $SMTPServer -Port $SMTPPort).TcpTestSucceeded)){
            throw "Unable to connect to the specified SMTP server. Confirm the settings in this script and retry `n`
            $($SMTPServer) unreachable on port $($SMTPPort)"
        }
        
        #Clear the progress bar
        Write-Progress -Activity "Test-NetConnection - $($SMTPServer):$($SMTPPort)" -Completed
    }

    #Deal with an Array first
    If($RemoteHost.Count -gt 1){    
        Write-Host "Monitoring the connection status of $($RemoteHost)" -ForegroundColor Blue
        Write-Host " press CTRL-C to stop" -ForegroundColor Blue
        Write-Host ""        
        Write-Progress -Activity "Monitoring connection status of $($RemoteHost)" -id $PID -Status "..."
        
        # Change the default behavior of CTRL-C so that the script can intercept and use it versus just terminating the script.
        [Console]::TreatControlCAsInput = $True
        # Sleep for 1 second and then flush the key buffer so any previously pressed keys are discarded and the loop can monitor for the use of
        #   CTRL-C. The sleep command ensures the buffer flushes correctly.
        Start-Sleep -Seconds 1
        $Host.UI.RawUI.FlushInputBuffer()
        
        $Jobs = @()
        $ScriptPath = $MyInvocation.MyCommand.Definition
        #Shared
        $ScriptArgs = @{
            EventLog = $EventLog
            NoNotify = $NoNotify
            Silent = $Silent
            Pause = $Pause
        }
                
        if($EmailAddress){$ScriptArgs.Add("EmailAddress", $EmailAddress)}
        #Unique
        If($TCPPort){
            # Port Query
            if($TCPPort){$ScriptArgs.Add("TCPPort", $TCPPort)}
        }elseIf($Namespace){
            # WMI Query
            if($Namespace){$ScriptArgs.Add("Namespace",$Namespace)}
            if($Class){$ScriptArgs.Add("Class",$Class)}
            if($WMIProperty){$ScriptArgs.Add("WMIProperty",$WMIProperty)}
            if($WMIFilter){$ScriptArgs.Add("WMIFilter",$WMIFilter)}
        }else{
            # Ping Query
        }
        $RemoteHost | ForEach-Object {
            $Jobs += Start-Job -Name "Monitor-$($_)" -ScriptBlock {param($ScriptPath, $RemoteHost, $ScriptArgs)
                $ScriptArgs.Add("RemoteHost",$RemoteHost)
                &$ScriptPath @ScriptArgs
            } -ArgumentList @($ScriptPath, $_, $ScriptArgs)
        }
        While ((Get-Job | Where-Object {$_.Name -like "Monitor-*"}).Count -gt 0) {
            Receive-Job -Job $Jobs

            # If a key was pressed during the loop execution, check to see if it was CTRL-C (aka "3"), and if so exit the script after clearing
            #   out any running jobs and setting CTRL-C back to normal.
            If ($Host.UI.RawUI.KeyAvailable -and ($Key = $Host.UI.RawUI.ReadKey("AllowCtrlC,NoEcho,IncludeKeyUp"))) {
                If ([Int]$Key.Character -eq 3) {
                    Write-Host ""
                    Write-Warning "CTRL-C was used - Shutting down any running jobs before exiting."
                    Get-Job | Where-Object {$_.Name -like "Monitor-*"} | Remove-Job -Force -Confirm:$False
                    [Console]::TreatControlCAsInput = $False
                    Return
                }
                # Flush the key buffer again for the next loop.
                $Host.UI.RawUI.FlushInputBuffer()
            }
            #Add a small pause to ease CPU load
            Start-Sleep -Milliseconds 200
        }
    }
        
    #Extract TCP Port if encoded in Host
    If ($RemoteHost -like "*:*") {
        $TCPPort = [Int32]$RemoteHost.Split(":")[1]
        $RemoteHost = $RemoteHost.Split(":")[0]
    }

    If($Host.Name -ne "ServerRemoteHost"){
        Write-Host "Monitoring the connection status of $($RemoteHost)" -ForegroundColor Blue
        Write-Host " press CTRL-C to stop" -ForegroundColor Blue
        Write-Host ""
    }

    #Setup Nofitications
    If (-not $NoNotify){
        $AppId = '{1AC14E77-02E7-4E5D-B744-2EB1AE5198B7}\WindowsPowerShell\v1.0\powershell.exe'
        $null = [Windows.UI.Notifications.ToastNotificationManager, Windows.UI.Notifications, ContentType = WindowsRuntime]
        $null = [Windows.Data.Xml.Dom.XmlDocument, Windows.Data.Xml.Dom.XmlDocument, ContentType = WindowsRuntime]
        $WarningLogo = "$env:TEMP\ToastWarningLogo.png"
        if (-not (Test-Path $WarningLogo)){
            $Logo = "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"
            [byte[]]$Bytes = [convert]::FromBase64String($Logo)
            [System.IO.File]::WriteAllBytes($WarningLogo,$Bytes)
        }
        
        $InfoLogo = "$env:TEMP\ToastInfoLogo.png"
        if (-not (Test-Path $InfoLogo)){
            $Logo = "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"
            [byte[]]$Bytes = [convert]::FromBase64String($Logo)
            [System.IO.File]::WriteAllBytes($InfoLogo,$Bytes)
        }
    }

    While ($true){
        If ($TCPPort){
            #This test is used to reduce the timeout - thanks to Jan Doggen: https://superuser.com/questions/805621/test-network-ports-faster-with-powershell

            $tcpclient = new-Object system.Net.Sockets.TcpClient
            $iar = $tcpclient.BeginConnect($RemoteHost,$TCPPort,$null,$null)
            $wait = $iar.AsyncWaitHandle.WaitOne(2000,$false)
            
            if(!$wait)
            {
                # Close the connection and report timeout
                $tcpclient.Close()
                $Result = $null
            }
            else
            {
                # Close the connection and report the error if there is one
                $error.Clear()
                Try{
                    $tcpclient.EndConnect($iar) | out-Null
                }catch{}
                if(!$?){
                    $Result = $null
                }else{
                    $Result = "Success"
                }
                $tcpclient.Close()
            }

            $OKStatus = "listening on $($TCPPort)"
            $ErStatus = "not listening on $($TCPPort)"
        }elseif($WMIProperty){
            if($Pause -lt 30){
                Write-Host "A pause of only $($Pause) between WMI queries will strain the remote host. Adjusting to 30 seconds."
                $Pause = 30
            }

            $WMIResult = Get-WmiObject -Namespace $Namespace -Class $Class -ComputerName $RemoteHost 

            if($WMIFilter){
                $WMIResult = $WMIResult.Where($WMIFilter)
            }

            if($WMIResult.Count -gt "1"){
                throw "Multiple WMI results found, check you're using a valid filter."
            }elseif($WMIResult.Count -eq "0"){
                $WMIResult = "NotFound"
            }else{
                #If a single result found, update the result to its value
                $WMIResult = $WMIResult | Select-Object -ExpandProperty $WMIProperty
            }

            #Always return a Result of 1, just use the RemoteHostStatus variable to mark it as a different/a change.
            $Result = 1 
            if($WMIResult -ne $WMIPrevious){
                #No change, Update history value to highlight change
                $RemoteHostStatus = 0
            }else{
                #No change, Update history value to highlight change
                $RemoteHostStatus = 1 
            }

            $WMIPrevious = $WMIResult
            $ErStatus = $OKStatus = "$($WMIProperty) has status $($WMIResult)"
        }else{
            $Result = Test-Connection -Count 1 -ComputerName $RemoteHost -Quiet

            $OKStatus = "online"
            $ErStatus = "offline"
        }

        If($Result){
            #Host is online/good
            If($RemoteHostStatus -ne 1){
                #New Status
                Write-Host " $($RemoteHost) $($OKStatus) at $(Get-Date -Format G)" -ForegroundColor Green

                If($Host.Name -ne "ServerRemoteHost"){ $Host.PrivateData.ProgressBackgroundColor='DarkCyan' }
                Write-Progress -id $PID -Activity " Monitoring connection status of $($RemoteHost)" -Status (Get-Culture).TextInfo.ToTitleCase($OKStatus.ToLower())

                If(-not $Silent){
                    [console]::beep(2000,300)
                }

                If(-not $NoNotify){
                    Write-Debug "Showing notification"

                    $XmlString = @("
                    <toast duration = 'short'>
                      <visual>
                        <binding template='ToastGeneric'>
                          <text>$($RemoteHost) $($OKStatus)</text>
                          <text>$($RemoteHost) $($OKStatus) at $(Get-Date -Format G)</text>
                          <image src='$InfoLogo' placement='appLogoOverride' hint-crop='circle' />
                        </binding>
                      </visual>
                      <audio src='ms-winsoundevent:Notification.Default' />
                    </toast>
                  ")

                  $ToastXml = [Windows.Data.Xml.Dom.XmlDocument]::new()
                  $ToastXml.LoadXml($XmlString)
                  $Toast = [Windows.UI.Notifications.ToastNotification]::new($ToastXml)
                  [Windows.UI.Notifications.ToastNotificationManager]::CreateToastNotifier($AppId).Show($Toast)
                }

                If($EmailAddress -ne $null){
                    $Message = "$($RemoteHost) $($OKStatus) at $(Get-Date -Format G)"
                    Send-MailMessage -To $EmailAddress -Body $Message -BodyAsHtml -From $SMTPFromAddress -SmtpServer $SMTPServer -Port $SMTPPort -Subject "$($RemoteHost) $($OKStatus)"
                }

                If($EventLog){
                    Write-EventLog -LogName Application -Source MonitoringConnection -Message "$($RemoteHost) $($OKStatus)" -EventId 8000 -EntryType Information
                }

                $RemoteHostStatus = 1
            }
        }else{
            #Host is offline/changed
            If($RemoteHostStatus -ne 0){
                #New Status
                Write-Host " $($RemoteHost) $($ErStatus) at $(Get-Date -Format G)" -ForegroundColor Red

                If($Host.Name -ne "ServerRemoteHost"){ $Host.PrivateData.ProgressBackgroundColor='Red' }
                Write-Progress -id $PID -Activity " Monitoring connection status of $($RemoteHost)" -Status (Get-Culture).TextInfo.ToTitleCase($ErStatus.ToLower())

                If(-not $Silent){
                    [console]::beep(500,300)
                }

                If($EmailAddress -ne $null){
                    $Message = "$($RemoteHost) $($ErStatus) at $(Get-Date -Format G)"
                    Send-MailMessage -To $EmailAddress -Body $Message -BodyAsHtml -From $SMTPFromAddress -SmtpServer $SMTPServer -Port $SMTPPort -Subject "$($RemoteHost) $($ErStatus)"
                }

                If(-not $NoNotify){
                    Write-Debug "Showing notification"

                    $XmlString = @("
                    <toast duration = 'short'>
                      <visual>
                        <binding template='ToastGeneric'>
                          <text>$($RemoteHost) $($ErStatus)</text>
                          <text>$($RemoteHost) $($ErStatus) at $(Get-Date -Format G)</text>
                          <image src='$WarningLogo' placement='appLogoOverride' hint-crop='circle' />
                        </binding>
                      </visual>
                      <audio src='ms-winsoundevent:Notification.Default' />
                    </toast>
                  ")

                  $ToastXml = [Windows.Data.Xml.Dom.XmlDocument]::new()
                  $ToastXml.LoadXml($XmlString)
                  $Toast = [Windows.UI.Notifications.ToastNotification]::new($ToastXml)
                  [Windows.UI.Notifications.ToastNotificationManager]::CreateToastNotifier($AppId).Show($Toast)
                }

                If($EventLog){
                    Write-EventLog -LogName Application -Source MonitoringConnection -Message "$($RemoteHost) $($ErStatus)" -EventId 8001 -EntryType Warning
                }
                $RemoteHostStatus = 0
            }
        }

        #Pause before trying again
        Start-Sleep -Seconds $Pause
    }

For that you need to know SMTP server settings. You'll need to put your settings into lines 171-173:

    $SMTPServer = "smtp.someopenmailserver.com"
    $SMTPPort = 25
    $SMTPFromAddress = "[email protected]"

For home, using your ISP's mail server settings are going to be the best/easiest option.

Unable to find type [mailaddress]: make sure that the assembly containing this type is loaded.
At D:\psftpMonitoring\Start-Monitoring.ps1:131 char:22

•     [mailaddress] <<<< $EmailAddress = $null,
  

  • CategoryInfo : InvalidOperation: (mailaddress:String) [], ParentContainsErrorRecordException
  • FullyQualifiedErrorId : TypeNotFound

Hi Kiwi - I have saved the smtp server details and I am facing above error for $EmailAddress. I gave from email and port 25 as smtp port as inputs

I am running on server 2008 R2

Congrats for the script! Im trying to schedule with params in win10 but it wont work. Is it possible to work?