boot2docker info

gistfile1.txt

Name:            boot2docker-vm
Groups:          /
Guest OS:        Linux 2.6 / 3.x (64 bit)
UUID:            bc98eef8-e6ed-44c9-bc6f-5cbd59430c73
Config file:     /Users/clemens/VirtualBox VMs/boot2docker-vm/boot2docker-vm.vbox
Snapshot folder: /Users/clemens/VirtualBox VMs/boot2docker-vm/Snapshots
Log folder:      /Users/clemens/VirtualBox VMs/boot2docker-vm/Logs
Hardware UUID:   bc98eef8-e6ed-44c9-bc6f-5cbd59430c73
Memory size:     1024MB
Page Fusion:     off
VRAM size:       8MB
CPU exec cap:    100%
HPET:            on
Chipset:         piix3
Firmware:        BIOS
Number of CPUs:  2
PAE:             on
Long Mode:       on
Synthetic CPU:   off
CPUID overrides: None
Boot menu mode:  disabled
Boot Device (1): DVD
Boot Device (2): DVD
Boot Device (3): HardDisk
Boot Device (4): Not Assigned
ACPI:            on
IOAPIC:          on
Time offset:     0ms
RTC:             UTC
Hardw. virt.ext: on
Nested Paging:   on
Large Pages:     on
VT-x VPID:       on
VT-x unr. exec.: on
State:           running (since 2014-02-07T12:36:22.544000000)
Monitor count:   1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address: 
Teleporter Password: 
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration: 
Autostart Enabled: off
Autostart Delay: 0
Default Frontend: 
Storage Controller Name (0):            SATA
Storage Controller Type (0):            IntelAhci
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0):  30
Storage Controller Port Count (0):      30
Storage Controller Bootable (0):        on
SATA (0, 0): /Users/clemens/bin/./boot2docker.iso (UUID: 05ac5943-07d1-46f0-b923-09187b5ca153)
SATA (1, 0): /Users/clemens/bin/./boot2docker.vmdk (UUID: 9f8bd4eb-bffa-42be-b7bc-546f6b678a95)
NIC 1:           MAC: 080027FDD2E6, Attachment: NAT, Cable connected: on, Trace: off (file: none), Type: virtio, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 1 Settings:  MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, receive: 64)
NIC 1 Rule(0):   name = docker, protocol = tcp, host ip = 127.0.0.1, host port = 4243, guest ip = , guest port = 4243
NIC 1 Rule(1):   name = ssh, protocol = tcp, host ip = 127.0.0.1, host port = 2022, guest ip = , guest port = 22
NIC 2:           disabled
NIC 3:           disabled
NIC 4:           disabled
NIC 5:           disabled
NIC 6:           disabled
NIC 7:           disabled
NIC 8:           disabled
Pointing Device: PS/2 Mouse
Keyboard Device: PS/2 Keyboard
UART 1:          disabled
UART 2:          disabled
LPT 1:           disabled
LPT 2:           disabled
Audio:           disabled
Clipboard Mode:  disabled
Drag'n'drop Mode: disabled
Session type:    headless
Video mode:      720x400x0 at 0,0
VRDE:            disabled
USB:             disabled
EHCI:            disabled

USB Device Filters:

<none>

Available remote USB devices:

<none>

Currently Attached USB Devices:

<none>

Bandwidth groups:  <none>

Shared folders:  <none>

VRDE Connection:    not active
Clients so far:     0

Video capturing:    not active
Capture screens:    0
Capture file:       /Users/clemens/VirtualBox VMs/boot2docker-vm/boot2docker-vm.webm
Capture dimensions: 1024x768
Capture rate:       512 kbps
Capture FPS:        25

Guest:

Configured memory balloon size:      0 MB
OS type:                             Linux26_64
Additions run level:                 0

Guest Facilities:

No active facilities.