dmesg

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x517f803c]
[    0.000000] Linux version 5.3.8-gentoo (root@ubuntu) (gcc version 8.3.0 (Gentoo 8.3.0-r1 p1.1)) #1 SMP PREEMPT Tue Nov 5 01:26:38 PST 2019
[    0.000000] Machine model: Lenovo Yoga C630
[    0.000000] printk: debug: ignoring loglevel setting.
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xffffd000  ESRT=0xdc611d18  SMBIOS=0xffe09000  MEMATTR=0xdc1b0698  RNG=0xe291bc18  MEMRESERVE=0xbb3f7e98 
[    0.000000] efi: seeding entropy pool
[    0.000000] efi: memattr: Unexpected EFI Memory Attributes table version -1347440721
[    0.000000] esrt: Reserving ESRT space from 0x00000000dc611d18 to 0x00000000dc611d50.
[    0.000000] cma: Reserved 32 MiB at 0x00000000df800000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000027c79ffff]
[    0.000000] NUMA: NODE_DATA [mem 0x27b8f8800-0x27b8f9fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027c79ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000803fffff]
[    0.000000]   node   0: [mem 0x0000000080400000-0x0000000080d5ffff]
[    0.000000]   node   0: [mem 0x0000000081ac0000-0x00000000856fffff]
[    0.000000]   node   0: [mem 0x0000000085f10000-0x0000000085fbffff]
[    0.000000]   node   0: [mem 0x000000008c517000-0x000000008c5fffff]
[    0.000000]   node   0: [mem 0x0000000097c00000-0x0000000098efffff]
[    0.000000]   node   0: [mem 0x0000000099500000-0x000000009ffcffff]
[    0.000000]   node   0: [mem 0x000000009ffd0000-0x000000009ffd9fff]
[    0.000000]   node   0: [mem 0x000000009ffdd000-0x000000009fffffff]
[    0.000000]   node   0: [mem 0x00000000a0000000-0x00000000e1b39fff]
[    0.000000]   node   0: [mem 0x00000000e1b3a000-0x00000000ffe59fff]
[    0.000000]   node   0: [mem 0x00000000ffe5a000-0x000000027c79ffff]
[    0.000000] Zeroed struct page in unavailable ranges: 502 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027c79ffff]
[    0.000000] On node 0 totalpages: 2003158
[    0.000000]   DMA32 zone: 6949 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 444726 pages, LIFO batch:63
[    0.000000]   Normal zone: 24351 pages used for memmap
[    0.000000]   Normal zone: 1558432 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] psci: OSI mode supported.
[    0.000000] percpu: Embedded 23 pages/cpu s54312 r8192 d31704 u94208
[    0.000000] pcpu-alloc: s54312 r8192 d31704 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: Hardware dirty bit management
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1971858
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/kernel-genkernel-arm64-5.3.8-gentoo root=UUID=5ba3f62b-c0a1-472a-8fe2-e3f1d4ac19a6 ro efi=novamap ignore_loglevel clk_ignore_unused pd_ignore_unused console=tty0
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0xd8611000-0xdc611000] (64MB)
[    0.000000] Memory: 7113628K/8012632K available (13692K kernel code, 1948K rwdata, 6640K rodata, 1536K init, 400K bss, 866236K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] random: get_random_bytes called from start_kernel+0x2f8/0x48c with crng_init=0
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000286] Console: colour dummy device 80x25
[    0.000742] printk: console [tty0] enabled
[    0.000815] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.000833] pid_max: default: 32768 minimum: 301
[    0.000904] LSM: Security Framework initializing
[    0.000969] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000995] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.001439] *** VALIDATE proc ***
[    0.001641] *** VALIDATE cgroup1 ***
[    0.001653] *** VALIDATE cgroup2 ***
[    0.023364] ASID allocator initialised with 32768 entries
[    0.031359] rcu: Hierarchical SRCU implementation.
[    0.041538] Remapping and enabling EFI services.
[    0.051400] smp: Bringing up secondary CPUs ...
[    0.084747] Detected VIPT I-cache on CPU1
[    0.084789] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
[    0.084842] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
[    0.116709] Detected VIPT I-cache on CPU2
[    0.116738] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
[    0.116783] CPU2: Booted secondary processor 0x0000000200 [0x517f803c]
[    0.148897] Detected VIPT I-cache on CPU3
[    0.148920] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
[    0.148960] CPU3: Booted secondary processor 0x0000000300 [0x517f803c]
[    0.181600] Detected VIPT I-cache on CPU4
[    0.181626] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[    0.181668] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
[    0.213405] Detected VIPT I-cache on CPU5
[    0.213433] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
[    0.213476] CPU5: Booted secondary processor 0x0000000500 [0x516f802d]
[    0.245629] Detected VIPT I-cache on CPU6
[    0.245659] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
[    0.245701] CPU6: Booted secondary processor 0x0000000600 [0x516f802d]
[    0.277858] Detected VIPT I-cache on CPU7
[    0.277889] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
[    0.277932] CPU7: Booted secondary processor 0x0000000700 [0x516f802d]
[    0.278020] smp: Brought up 1 node, 8 CPUs
[    0.278148] SMP: Total of 8 processors activated.
[    0.278157] CPU features: detected: Privileged Access Never
[    0.278165] CPU features: detected: LSE atomic instructions
[    0.278172] CPU features: detected: User Access Override
[    0.278180] CPU features: detected: 32-bit EL0 Support
[    0.278188] CPU features: detected: Common not Private translations
[    0.278196] CPU features: detected: RAS Extension Support
[    0.278204] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.278215] CPU features: detected: CRC32 instructions
[    1.839537] CPU: All CPU(s) started at EL1
[    1.839584] alternatives: patching kernel code
[    1.846823] devtmpfs: initialized
[    1.855180] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    1.855203] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.856084] xor: measuring software checksum speed
[    1.896107]    8regs     :  3016.000 MB/sec
[    1.936180]    32regs    :  3811.000 MB/sec
[    1.976209]    arm64_neon:  2827.000 MB/sec
[    1.976218] xor: using function: 32regs (3811.000 MB/sec)
[    1.976239] pinctrl core: initialized pinctrl subsystem
[    1.977520] SMBIOS 3.0 present.
[    1.977540] DMI: LENOVO 81JL/LNVNB161216, BIOS 9UCN33WW(V2.06) 06/ 4/2019
[    1.977956] NET: Registered protocol family 16
[    1.978432] audit: initializing netlink subsys (disabled)
[    1.978545] audit: type=2000 audit(0.416:1): state=initialized audit_enabled=0 res=1
[    1.984240] cpuidle: using governor menu
[    1.984568] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.985388] DMA: preallocated 256 KiB pool for atomic allocations
[    1.986666] Serial: AMBA PL011 UART driver
[    2.010238] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    2.010263] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    2.010274] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    2.010285] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    2.013450] cryptd: max_cpu_qlen set to 1000
[    2.084492] raid6: neonx8   gen()  2717 MB/s
[    2.152558] raid6: neonx8   xor()  2324 MB/s
[    2.220656] raid6: neonx4   gen()  2636 MB/s
[    2.288730] raid6: neonx4   xor()  2316 MB/s
[    2.356828] raid6: neonx2   gen()  2042 MB/s
[    2.424928] raid6: neonx2   xor()  1850 MB/s
[    2.493007] raid6: neonx1   gen()  1124 MB/s
[    2.561074] raid6: neonx1   xor()  1328 MB/s
[    2.629187] raid6: int64x8  gen()  1265 MB/s
[    2.697259] raid6: int64x8  xor()   687 MB/s
[    2.765350] raid6: int64x4  gen()  1297 MB/s
[    2.833424] raid6: int64x4  xor()   684 MB/s
[    2.901485] raid6: int64x2  gen()  1099 MB/s
[    2.969558] raid6: int64x2  xor()   570 MB/s
[    3.037641] raid6: int64x1  gen()   916 MB/s
[    3.105710] raid6: int64x1  xor()   493 MB/s
[    3.105718] raid6: using algorithm neonx8 gen() 2717 MB/s
[    3.105726] raid6: .... xor() 2324 MB/s, rmw enabled
[    3.105737] raid6: using neon recovery algorithm
[    3.106186] ACPI: Interpreter disabled.
[    3.122090] vgaarb: loaded
[    3.122380] SCSI subsystem initialized
[    3.122530] libata version 3.00 loaded.
[    3.122739] usbcore: registered new interface driver usbfs
[    3.122777] usbcore: registered new interface driver hub
[    3.122854] usbcore: registered new device driver usb
[    3.123402] pps_core: LinuxPPS API ver. 1 registered
[    3.123412] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    3.123434] PTP clock support registered
[    3.123539] EDAC MC: Ver: 3.0.0
[    3.124043] Registered efivars operations
[    3.124671] Advanced Linux Sound Architecture Driver Initialized.
[    3.125003] Bluetooth: Core ver 2.22
[    3.125035] NET: Registered protocol family 31
[    3.125044] Bluetooth: HCI device and connection manager initialized
[    3.125058] Bluetooth: HCI socket layer initialized
[    3.125068] Bluetooth: L2CAP socket layer initialized
[    3.125084] Bluetooth: SCO socket layer initialized
[    3.125796] clocksource: Switched to clocksource arch_sys_counter
[    3.125961] VFS: Disk quotas dquot_6.6.0
[    3.126019] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.126075] *** VALIDATE hugetlbfs ***
[    3.126205] pnp: PnP ACPI: disabled
[    3.131350] thermal_sys: Registered thermal governor 'step_wise'
[    3.131355] thermal_sys: Registered thermal governor 'power_allocator'
[    3.133443] NET: Registered protocol family 2
[    3.133808] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    3.133930] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    3.134283] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    3.135176] TCP: Hash tables configured (established 65536 bind 65536)
[    3.135292] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    3.135484] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    3.135830] NET: Registered protocol family 1
[    3.136230] RPC: Registered named UNIX socket transport module.
[    3.136245] RPC: Registered udp transport module.
[    3.136253] RPC: Registered tcp transport module.
[    3.136261] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.136277] PCI: CLS 0 bytes, default 64
[    3.136407] Unpacking initramfs...
[   28.285684] Freeing initrd memory: 89164K
[   28.286751] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[   28.287003] kvm [1]: HYP mode not available
[   28.587817] Initialise system trusted keyrings
[   28.587945] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[   28.592971] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   28.593529] NFS: Registering the id_resolver key type
[   28.593557] Key type id_resolver registered
[   28.593566] Key type id_legacy registered
[   28.593581] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   28.593608] ntfs: driver 2.1.32 [Flags: R/W].
[   28.593959] 9p: Installing v9fs 9p2000 file system support
[   28.594258] NILFS version 2 loaded
[   28.612302] Key type asymmetric registered
[   28.612320] Asymmetric key parser 'x509' registered
[   28.612360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[   28.612503] io scheduler mq-deadline registered
[   28.612518] io scheduler kyber registered
[   28.612647] io scheduler bfq registered
[   28.621186] efifb: probing for efifb
[   28.621254] efifb: framebuffer at 0x80400000, using 8100k, total 8100k
[   28.621265] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[   28.621273] efifb: scrolling: redraw
[   28.621283] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   28.633711] Console: switching to colour frame buffer device 240x67
[   28.645245] fb0: EFI VGA frame buffer device
[   28.645596] EINJ: ACPI disabled.
[   30.686502] smps2: supplied by vph_pwr
[   30.686752] smps3: supplied by vph_pwr
[   30.686824] smps3: Setting 1352000-1352000uV
[   30.687080] smps4: supplied by vph_pwr
[   30.687168] smps4: Setting 1800000-1800000uV
[   30.687409] smps5: supplied by vph_pwr
[   30.687474] smps5: Setting 2040000-2040000uV
[   30.687705] smps7: supplied by vph_pwr
[   30.687774] smps7: Setting 1028000-1028000uV
[   30.688019] ldo1: supplied by smps7
[   30.688084] ldo1: Setting 880000-880000uV
[   30.688453] ldo2: supplied by smps3
[   30.688516] ldo2: Setting 1200000-1200000uV
[   30.688877] ldo3: supplied by smps7
[   30.689066] ldo5: supplied by smps7
[   30.689128] ldo5: Setting 800000-800000uV
[   30.689319] ldo6: supplied by vph_pwr
[   30.689382] ldo6: Setting 1800000-1800000uV
[   30.689578] ldo7: supplied by smps5
[   30.689649] ldo7: Setting 1800000-1800000uV
[   30.689852] ldo8: supplied by smps3
[   30.690039] ldo9: supplied by regulator-dummy
[   30.690247] ldo10: supplied by regulator-dummy
[   30.690408] ldo11: supplied by smps7
[   30.690570] ldo12: supplied by smps5
[   30.690646] ldo12: Setting 1800000-1800000uV
[   30.690871] ldo13: supplied by regulator-dummy
[   30.691046] ldo14: supplied by smps5
[   30.691113] ldo14: Setting 1880000-1880000uV
[   30.691556] ldo15: supplied by smps5
[   30.691745] ldo16: supplied by regulator-dummy
[   30.691918] ldo17: supplied by smps3
[   30.691992] ldo17: Setting 1304000-1304000uV
[   30.692225] ldo18: supplied by regulator-dummy
[   30.692430] ldo19: supplied by regulator-dummy
[   30.694360] ldo19: Setting 3100000-3108000uV
[   30.696427] ldo20: supplied by regulator-dummy
[   30.698331] ldo20: Setting 2960000-2960000uV
[   30.700361] ldo21: supplied by regulator-dummy
[   30.702352] ldo22: supplied by regulator-dummy
[   30.704311] ldo23: supplied by regulator-dummy
[   30.706245] ldo24: supplied by regulator-dummy
[   30.708015] ldo24: Setting 3075000-3083000uV
[   30.709950] ldo25: supplied by regulator-dummy
[   30.711683] ldo25: Setting 3104000-3112000uV
[   30.713532] ldo26: supplied by smps3
[   30.715238] ldo26: Setting 1200000-1208000uV
[   30.717185] ldo28: supplied by regulator-dummy
[   30.718999] lvs1: supplied by smps4
[   30.720763] lvs2: supplied by smps4
[   30.726184] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   30.729749] SuperH (H)SCI(F) driver initialized
[   30.731787] msm_serial: driver initialized
[   30.733744] 898000.serial: ttyHS0 at MMIO 0x898000 (irq = 124, base_baud = 0) is a MSM
[   30.735639] serial serial0: tty port ttyHS0 registered
[   30.737886] arm-smmu 5040000.iommu: probing hardware configuration...
[   30.739595] arm-smmu 5040000.iommu: SMMUv2 with:
[   30.741292] arm-smmu 5040000.iommu: 	stage 1 translation
[   30.742973] arm-smmu 5040000.iommu: 	address translation ops
[   30.744610] arm-smmu 5040000.iommu: 	non-coherent table walk
[   30.746225] arm-smmu 5040000.iommu: 	(IDR0.CTTW overridden by FW configuration)
[   30.747857] arm-smmu 5040000.iommu: 	stream matching with 5 register groups
[   30.749510] arm-smmu 5040000.iommu: 	5 context banks (0 stage-2 only)
[   30.751202] arm-smmu 5040000.iommu: 	Supported page sizes: 0x63315000
[   30.752878] arm-smmu 5040000.iommu: 	Stage-1: 48-bit VA -> 36-bit IPA
[   30.755792] arm-smmu 15000000.iommu: option qcom,smmu-500-fw-impl-errata
[   30.757941] arm-smmu 15000000.iommu: probing hardware configuration...
[   30.759639] arm-smmu 15000000.iommu: SMMUv2 with:
[   30.761341] arm-smmu 15000000.iommu: 	stage 1 translation
[   30.763047] arm-smmu 15000000.iommu: 	non-coherent table walk
[   30.764737] arm-smmu 15000000.iommu: 	(IDR0.CTTW overridden by FW configuration)
[   30.766469] arm-smmu 15000000.iommu: 	stream matching with 76 register groups
[   30.768209] arm-smmu 15000000.iommu: 	45 context banks (0 stage-2 only)
[   30.769972] arm-smmu 15000000.iommu: 	Supported page sizes: 0x61311000
[   30.771712] arm-smmu 15000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
[   30.773465] arm-smmu 15000000.iommu: Handoff smr: 80080880 s2cr: 0 cb: 0
[   30.775260] arm-smmu 15000000.iommu: Handoff smr: 80080c80 s2cr: 0 cb: 0
[   30.777032] arm-smmu 15000000.iommu: Handoff smr: 800f00a0 s2cr: 1 cb: 1
[   30.778798] arm-smmu 15000000.iommu: Handoff smr: 800f00c0 s2cr: 1 cb: 1
[   30.780537] arm-smmu 15000000.iommu: Handoff smr: 800f00e0 s2cr: 2 cb: 2
[   30.782271] arm-smmu 15000000.iommu: Handoff smr: 800f0100 s2cr: 2 cb: 2
[   30.783985] arm-smmu 15000000.iommu: Handoff smr: 80000740 s2cr: 3 cb: 3
[   30.785676] arm-smmu 15000000.iommu: Handoff smr: 80000760 s2cr: 3 cb: 3
[   30.799084] loop: module loaded
[   30.801757] ufshcd-qcom 1d84000.ufshc: Adding to iommu group 0
[   30.803863] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[   30.805684] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[   30.807516] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[   30.809679] ufshcd-qcom 1d84000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
[   30.811550] ufshcd-qcom 1d84000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
[   30.813492] ufshcd-qcom 1d84000.ufshc: Initialization failed
[   30.845891] ufshcd-qcom 1d84000.ufshc: ufshcd_pltfrm_init() failed -517
[   30.850088] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
[   30.858687] libphy: Fixed MDIO Bus: probed
[   30.860917] tun: Universal TUN/TAP device driver, 1.6
[   30.863670] thunder_xcv, ver 1.0
[   30.865666] thunder_bgx, ver 1.0
[   30.867637] nicpf, ver 1.0
[   30.869963] hclge is initializing
[   30.871884] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[   30.873869] hns3: Copyright (c) 2017 Huawei Corporation.
[   30.875919] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   30.877970] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   30.880078] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[   30.882198] igb: Copyright (c) 2007-2014 Intel Corporation.
[   30.884362] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[   30.886537] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[   30.889012] sky2: driver version 1.30
[   30.891713] usbcore: registered new interface driver r8152
[   30.893962] usbcore: registered new interface driver ax88179_178a
[   30.896296] VFIO - User Level meta-driver version: 0.3
[   30.901869] dwc3 a600000.dwc3: Adding to iommu group 1
[   30.904271] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[   30.909134] dwc3 a800000.dwc3: Adding to iommu group 2
[   30.911490] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[   30.914484] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   30.916650] ehci-pci: EHCI PCI platform driver
[   30.918828] ehci-platform: EHCI generic platform driver
[   30.921092] ehci-orion: EHCI orion driver
[   30.923350] ehci-exynos: EHCI EXYNOS driver
[   30.925593] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   30.927822] ohci-pci: OHCI PCI platform driver
[   30.930048] ohci-platform: OHCI generic platform driver
[   30.932356] ohci-exynos: OHCI EXYNOS driver
[   30.934996] usbcore: registered new interface driver usb-storage
[   30.938671] usbcore: registered new interface driver xpad
[   30.942198] i2c /dev entries driver
[   30.950251] Bluetooth: HCI UART driver ver 2.3
[   30.952466] Bluetooth: HCI UART protocol H4 registered
[   30.954689] Bluetooth: HCI UART protocol LL registered
[   30.956937] Bluetooth: HCI UART protocol Broadcom registered
[   30.959141] Bluetooth: HCI UART protocol QCA registered
[   30.960281] ldo25: unsupportable voltage range: 3300000-3112000uV
[   30.964002] Bluetooth: failed to enable regulator:vddch0
[   30.966852] Bluetooth: wcn3990 serdev registration failed
[   30.967478] sdhci: Secure Digital Host Controller Interface driver
[   30.969498] hci_uart_qca: probe of serial0-0 failed with error -22
[   30.971501] sdhci: Copyright(c) Pierre Ossman
[   30.976588] Synopsys Designware Multimedia Card Interface Driver
[   30.979496] sdhci-pltfm: SDHCI platform and OF driver helper
[   30.981417] ledtrig-cpu: registered to indicate activity on CPUs
[   30.983551] hidraw: raw HID events driver (C) Jiri Kosina
[   30.984455] usbcore: registered new interface driver usbhid
[   30.985168] usbhid: USB HID core driver
[   30.987299] NET: Registered protocol family 17
[   30.988123] 9pnet: Installing 9P2000 support
[   30.988861] Key type dns_resolver registered
[   30.990822] registered taskstats version 1
[   30.991676] Loading compiled-in X.509 certificates
[   30.992951] Btrfs loaded, crc32c=crc32c-generic
[   30.998526] SW_EDP_1P2: supplied by ldo2
[   30.999891] qcom-qmp-phy 1d87000.phy: Registered Qcom-QMP phy
[   31.000973] qcom-qmp-phy 88e9000.phy: Registered Qcom-QMP phy
[   31.001971] qcom-qmp-phy 88eb000.phy: Registered Qcom-QMP phy
[   31.002891] qcom-qusb2-phy 88e2000.phy: Registered Qcom-QUSB2 phy
[   31.003780] qcom-qusb2-phy 88e3000.phy: Registered Qcom-QUSB2 phy
[   31.005449] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[   31.006242] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[   31.006953] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[   31.009021] scsi host0: ufshcd
[   31.023746] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[   31.030344] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   31.031450] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   31.032605] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000002010010
[   31.033675] xhci-hcd xhci-hcd.0.auto: irq 130, io mem 0x0a600000
[   31.035406] hub 1-0:1.0: USB hub found
[   31.036432] hub 1-0:1.0: 1 port detected
[   31.037527] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   31.038538] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   31.039546] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[   31.040563] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   31.042463] hub 2-0:1.0: USB hub found
[   31.043162] hub 2-0:1.0: 1 port detected
[   31.044232] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[   31.045211] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[   31.047493] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   31.048581] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[   31.049803] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000002010010
[   31.050929] xhci-hcd xhci-hcd.1.auto: irq 131, io mem 0x0a800000
[   31.052613] hub 3-0:1.0: USB hub found
[   31.053704] hub 3-0:1.0: 1 port detected
[   31.054878] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   31.055830] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[   31.056590] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[   31.057364] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   31.058560] hub 4-0:1.0: USB hub found
[   31.059332] hub 4-0:1.0: 1 port detected
[   31.060409] PM: genpd: Not disabling unused power domains
[   31.061821] hctosys: unable to open rtc device (rtc0)
[   31.062833] clk: Not disabling unused clocks
[   31.063603] ALSA device list:
[   31.064375]   No soundcards found.
[   31.142940] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[   31.157037] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[   31.161883] scsi 0:0:0:49488: Well-known LUN    SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[   31.170526] scsi 0:0:0:49476: Well-known LUN    SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[   31.175703] scsi 0:0:0:49456: Well-known LUN    SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[   31.179685] scsi 0:0:0:0: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[   31.181974] sd 0:0:0:0: Power-on or device reset occurred
[   31.192121] scsi 0:0:0:1: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[   31.193120] sd 0:0:0:0: [sda] 29765632 4096-byte logical blocks: (122 GB/114 GiB)
[   31.195770] sd 0:0:0:1: Power-on or device reset occurred
[   31.199957] sd 0:0:0:0: [sda] Write Protect is off
[   31.200155] scsi 0:0:0:2: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[   31.201838] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[   31.202181] sd 0:0:0:1: [sdb] Write Protect is off
[   31.202188] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
[   31.202943] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   31.203290] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
[   31.205077] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
[   31.207523] sd 0:0:0:2: Power-on or device reset occurred
[   31.229157] scsi 0:0:0:3: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[   31.229600] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   31.230904]  sdb: sdb1 sdb2
[   31.232372] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[   31.233017] sd 0:0:0:3: Power-on or device reset occurred
[   31.233386] scsi 0:0:0:4: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[   31.233489] sd 0:0:0:1: [sdb] Attached SCSI disk
[   31.233690] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
[   31.233761] sd 0:0:0:3: [sdd] Write Protect is off
[   31.233766] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
[   31.233882] sd 0:0:0:4: Power-on or device reset occurred
[   31.233920] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   31.233986] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
[   31.234129] scsi 0:0:0:5: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[   31.234402] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
[   31.234479] sd 0:0:0:4: [sde] Write Protect is off
[   31.234483] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
[   31.234620] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   31.234626] sd 0:0:0:5: Power-on or device reset occurred
[   31.234688] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes
[   31.235256] random: fast init done
[   31.235352] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
[   31.235700] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks: (1.61 GB/1.50 GiB)
[   31.236247] sd 0:0:0:5: [sdf] Write Protect is off
[   31.236251] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
[   31.236726] sd 0:0:0:2: [sdc] Write Protect is off
[   31.237009] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   31.237489]  sdd: sdd2 sdd3
[   31.237515] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes
[   31.238692]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27
[   31.239322] sd 0:0:0:3: [sdd] Attached SCSI disk
[   31.240491]  sdf: sdf2 sdf3 sdf4 sdf5
[   31.243453] sd 0:0:0:4: [sde] Attached SCSI disk
[   31.243516] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
[   31.243576] sd 0:0:0:5: [sdf] Attached SCSI disk
[   31.243911]  sda: sda1 sda2
[   31.244959] sd 0:0:0:0: [sda] Attached SCSI disk
[   31.274583] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   31.275546] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
[   31.279554]  sdc: sdc1 sdc2
[   31.282411] sd 0:0:0:2: [sdc] Attached SCSI disk
[   31.284048] Freeing unused kernel memory: 1536K
[   31.306740] Run /init as init process
[   31.374091] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   31.394088] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[   31.585441] hub 1-1:1.0: USB hub found
[   31.588614] hub 1-1:1.0: 4 ports detected
[   31.601743] hub 3-1:1.0: USB hub found
[   31.604304] hub 3-1:1.0: 3 ports detected
[   31.666440] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[   31.674320] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[   31.729717] hub 4-1:1.0: USB hub found
[   31.732194] hub 4-1:1.0: 2 ports detected
[   31.734599] hub 2-1:1.0: USB hub found
[   31.737364] hub 2-1:1.0: 4 ports detected
[   31.946174] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
[   31.982068] usb 3-1.3: new high-speed USB device number 3 using xhci-hcd
[   32.065171] usb 1-1.1: not running at top speed; connect to a high speed hub
[   32.154552] usb 2-1.3: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[   32.262242] usb 1-1.2: new full-speed USB device number 4 using xhci-hcd
[   32.481260] usb 2-1.4: new SuperSpeed Gen 1 USB device number 4 using xhci-hcd
[   32.484783] input: C-Media Electronics Inc. USB Advanced Audio Device as /devices/platform/soc/a6f8800.usb/a600000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.3/0003:0D8C:0022.0001/input/input0
[   32.548977] hub 2-1.4:1.0: USB hub found
[   32.554567] hid-generic 0003:0D8C:0022.0001: input,hidraw0: USB HID v1.11 Device [C-Media Electronics Inc. USB Advanced Audio Device] on usb-xhci-hcd.0.auto-1.2/input3
[   32.562193] hub 2-1.4:1.0: 4 ports detected
[   32.609309] usb 2-1.3: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[   32.707572] r8152 2-1.3:1.0 eth0: v1.09.10
[   32.717886] usb 1-1.4: new high-speed USB device number 5 using xhci-hcd
[   32.897698] hub 1-1.4:1.0: USB hub found
[   32.907289] hub 1-1.4:1.0: 4 ports detected
[   33.080172] device-mapper: uevent: version 1.0.3
[   33.082303] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: [email protected]
[   33.551883] fuse: init (API version 7.31)
[   34.725884] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   35.788377] random: lvm: uninitialized urandom read (4 bytes read)
[   35.808268] random: lvm: uninitialized urandom read (4 bytes read)
[   37.014314] random: lvm: uninitialized urandom read (4 bytes read)
[   37.032264] random: lvm: uninitialized urandom read (4 bytes read)
[   37.746815] efivars: get_next_variable: status=8000000000000003
[   38.581019] udevd[5851]: starting version 3.2.9
[   38.587681] random: udevd: uninitialized urandom read (16 bytes read)
[   38.589577] random: udevd: uninitialized urandom read (16 bytes read)
[   38.590874] random: udevd: uninitialized urandom read (16 bytes read)
[   38.608851] udevd[5851]: starting eudev-3.2.9
[   38.769514] EFI Variables Facility v0.08 2004-May-17
[   38.773123] efivars: get_next_variable: status=8000000000000003
[   38.779097] pstore: Using crash dump compression: deflate
[   38.781890] pstore: Registered efi as persistent store backend
[   38.786095] i2c_hid 3-0015: 3-0015 supply vdd not found, using dummy regulator
[   38.787109] i2c_hid 3-0015: 3-0015 supply vddl not found, using dummy regulator
[   38.788289] i2c_hid 3-002c: 3-002c supply vdd not found, using dummy regulator
[   38.791172] i2c_hid 3-002c: 3-002c supply vddl not found, using dummy regulator
[   38.807119] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   38.808946] qcom_q6v5_pas remoteproc-adsp: remoteproc-adsp supply cx not found, using dummy regulator
[   38.809720] adreno 5000000.gpu: Adding to iommu group 3
[   38.810770] qcom_q6v5_pas remoteproc-adsp: remoteproc-adsp supply px not found, using dummy regulator
[   38.815726] msm ae00000.mdss: Adding to iommu group 4
[   38.820869] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   38.821897] input: hid-over-i2c 06CB:CD3E Mouse as /devices/platform/soc/8c0000.geniqup/88c000.i2c/i2c-3/3-002c/0018:06CB:CD3E.0002/input/input1
[   38.823311] input: hid-over-i2c 06CB:CD3E Touchpad as /devices/platform/soc/8c0000.geniqup/88c000.i2c/i2c-3/3-002c/0018:06CB:CD3E.0002/input/input2
[   38.824885] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[   38.827366] hid-generic 0018:06CB:CD3E.0002: input,hidraw1: I2C HID v1.00 Mouse [hid-over-i2c 06CB:CD3E] on 3-002c
[   38.830224] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[   38.830483] NET: Registered protocol family 42
[   38.831240] remoteproc remoteproc1: 4080000.remoteproc is available
[   38.831459] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   38.831464] cfg80211: failed to load regulatory.db
[   38.833917] remoteproc remoteproc0: remoteproc-adsp is available
[   38.836771] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[   38.840198] qcom_q6v5_pas remoteproc-cdsp: remoteproc-cdsp supply cx not found, using dummy regulator
[   38.840312] mc: Linux media interface: v0.10
[   38.843174] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[   38.846207] remoteproc remoteproc0: Direct firmware load for qcom/c630/adsp.mdt failed with error -2
[   38.849520] msm ae00000.mdss: master bind failed: -517
[   38.849921] qcom_q6v5_pas remoteproc-cdsp: remoteproc-cdsp supply px not found, using dummy regulator
[   38.851728] i2c_hid 5-0010: 5-0010 supply vdd not found, using dummy regulator
[   38.851765] i2c_hid 5-0010: 5-0010 supply vddl not found, using dummy regulator
[   38.852060] remoteproc remoteproc2: remoteproc-cdsp is available
[   38.852112] remoteproc remoteproc2: Direct firmware load for qcom/c630/cdsp.mdt failed with error -2
[   38.852116] remoteproc remoteproc2: powering up remoteproc-cdsp
[   38.852122] remoteproc remoteproc2: Direct firmware load for qcom/c630/cdsp.mdt failed with error -2
[   38.852124] remoteproc remoteproc2: request_firmware failed: -2
[   38.852918] remoteproc remoteproc0: powering up remoteproc-adsp
[   38.860664] videodev: Linux video capture interface: v2.00
[   38.863418] remoteproc remoteproc0: Direct firmware load for qcom/c630/adsp.mdt failed with error -2
[   38.872606] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[   38.874838] remoteproc remoteproc0: request_firmware failed: -2
[   38.876156] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[   38.879693] input: hid-over-i2c 04F3:279F Touchscreen as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0003/input/input4
[   38.881512] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[   38.884959] input: hid-over-i2c 04F3:279F as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0003/input/input5
[   38.885498] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[   38.890187] input: hid-over-i2c 04F3:279F as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0003/input/input6
[   38.892574] msm ae00000.mdss: master bind failed: -517
[   38.895459] input: hid-over-i2c 04F3:279F as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0003/input/input7
[   38.898714] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[   38.899797] hid-generic 0018:04F3:279F.0003: input,hidraw2: I2C HID v1.00 Device [hid-over-i2c 04F3:279F] on 5-0010
[   38.900560] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[   38.901963] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:2115)
[   38.904706] ath10k_snoc 18800000.wifi: Adding to iommu group 5
[   38.905517] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[   38.905803] i2c_hid 11-005c: 11-005c supply vdd not found, using dummy regulator
[   38.905865] i2c_hid 11-005c: 11-005c supply vddl not found, using dummy regulator
[   38.920010] uvcvideo 3-1.3:1.0: Entity type for entity Extension 4 was not initialized!
[   38.921151] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[   38.930592] uvcvideo 3-1.3:1.0: Entity type for entity Extension 3 was not initialized!
[   38.931832] msm ae00000.mdss: master bind failed: -517
[   38.936410] uvcvideo 3-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[   38.940506] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[   38.941156] uvcvideo 3-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[   38.942498] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[   38.943880] input: Integrated Camera: Integrated C as /devices/platform/soc/a8f8800.usb/a800000.dwc3/xhci-hcd.1.auto/usb3/3-1/3-1.3/3-1.3:1.0/input/input10
[   38.945076] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[   38.946525] usbcore: registered new interface driver uvcvideo
[   38.947519] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[   38.948719] USB Video Class driver (1.1.1)
[   38.950084] msm ae00000.mdss: master bind failed: -517
[   38.955833] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[   38.957213] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[   38.957386] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[   38.957436] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[   38.965309] msm ae00000.mdss: master bind failed: -517
[   38.968138] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[   38.968205] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[   38.968344] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[   38.968389] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[   38.968433] msm ae00000.mdss: master bind failed: -517
[   38.970763] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[   38.970829] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[   38.977086] input: hid-over-i2c 6243:0001 Keyboard as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0004/input/input11
[   38.978245] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[   38.985088] input: hid-over-i2c 6243:0001 Consumer Control as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0004/input/input12
[   38.985598] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[   38.993222] input: hid-over-i2c 6243:0001 Wireless Radio Control as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0004/input/input14
[   38.994069] msm ae00000.mdss: master bind failed: -517
[   38.998988] input: hid-over-i2c 6243:0001 as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0004/input/input15
[   39.002438] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[   39.004992] hid-generic 0018:6243:0001.0004: input,hidraw3: I2C HID v1.00 Keyboard [hid-over-i2c 6243:0001] on 11-005c
[   39.006078] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[   39.020641] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[   39.022062] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[   39.023924] msm ae00000.mdss: master bind failed: -517
[   39.029227] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[   39.030708] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[   39.032247] msm_dsi_host_set_src_pll: can't set parent to byte_clk_src. ret=-22
[   39.033592] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[   39.035433] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -22
[   39.036869] msm ae00000.mdss: master bind failed: -22
[   39.038769] msm: probe of ae00000.mdss failed with error -22
[   39.443839] EXT4-fs (sda2): re-mounted. Opts: (null)
[   39.673211] random: crng init done
[   39.675612] random: 3 urandom warning(s) missed due to ratelimiting
[   39.772623] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   41.214924] NET: Registered protocol family 10
[   41.216973] Segment Routing with IPv6
[   42.960115] elogind-daemon[6862]: New seat seat0.
[   43.038402] elogind-daemon[6862]: Watching system buttons on /dev/input/event8 (hid-over-i2c 6243:0001 Keyboard)
[   43.042960] elogind-daemon[6862]: Watching system buttons on /dev/input/event9 (hid-over-i2c 6243:0001 Consumer Control)
[   43.083880] 8021q: 802.1Q VLAN Support v1.8
[   43.202125] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   43.207325] r8152 2-1.3:1.0 eth0: carrier on
[   43.979812] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   43.985608] Bridge firewalling registered
[   70.202718] elogind-daemon[6862]: New session 1 of user j.
[  344.826886] elogind-daemon[6862]: New session 2 of user j.
[  410.901246] elogind-daemon[6862]: New session 3 of user j.