Format usb flash drive and mount as sdcard for the WiFi Pineapple Nano

format.sh

#!/bin/bash
#2018 - Zylla - ([email protected])
#Format usb flash drive as sdcard for the WiFi Pineapple Nano
#Source https://forums.hak5.org/topic/39096-mana-attack-for-the-pineapple/?do=findComment&comment=303054
#You can also manually partition your usb flash drive on your computer

[[ -f /tmp/usb_format.progress ]] && {
  exit 0
}

touch /tmp/usb_format.progress

umount /sd
swapoff /dev/sdb2

sleep 2
cat /pineapple/modules/Advanced/formatSD/fdisk_options | fdisk /dev/sdb
sleep 2

umount /sd
mkfs.ext4 /dev/sdb1
sleep 2

mkfs.ext4 /dev/sdb2
mkswap /dev/sdb2

mount /dev/sdb1 /sd
swapon /dev/sdb2

rm /tmp/usb_format.progress

fstab

config global 
    option anon_swap '0'
    option anon_mount '0'
    option auto_swap '1'
    option auto_mount '1'
    option delay_root '5'
    option check_fs '0'

config mount
    option target '/sd'
    option device '/dev/sdb1'
    option fstype 'auto'
    option options 'rw,sync'
    option enabled '1'
    
config swap
	option device '/dev/sdb2'
	option enabled '1'

option device '/dev/sdb1'

This will most likely fail if another pineapple will not use sdb as device. Use: /dev/sdcard/sd1 and sd2 for swap.