Skip to content

Instantly share code, notes, and snippets.

@krmnn
Created July 10, 2019 10:40
Show Gist options
  • Save krmnn/9035c6fa6e538ae37c293de2744954c1 to your computer and use it in GitHub Desktop.
Save krmnn/9035c6fa6e538ae37c293de2744954c1 to your computer and use it in GitHub Desktop.
vim config
" .vimrc
" 2009-2013 Thomas Karmann
" Lots of cool stuff robbed from http://ruderich.org/simon/config/vimrc
" set the runtime path to include Vundle and initialize
set nocompatible
filetype off
set rtp+=~/.vim/bundle/Vundle.vim
call vundle#begin()
Plugin 'gmarik/Vundle.vim'
Plugin 'pearofducks/ansible-vim'
Bundle 'matze/vim-move'
Bundle 'derekwyatt/vim-fswitch'
Bundle 'scrooloose/nerdcommenter'
Bundle 'scrooloose/nerdtree'
Plugin 'Xuyuanp/nerdtree-git-plugin'
Bundle 'ctrlpvim/ctrlp.vim'
Bundle 'majutsushi/tagbar'
Bundle 'ludovicchabant/vim-gutentags'
Plugin 'guns/xterm-color-table.vim'
Plugin 'adborden/vim-notmuch-address'
Plugin 'nathangrigg/vim-beancount'
call vundle#end() " required
filetype plugin indent on " required
syntax enable
" Appearance
colorscheme krmnn
set background=dark
" Display line numbers.
set number
" But use as little space as possible for the numbers column. Thanks to James
" Vega (http://git.jamessan.com/?p=etc/vim.git;a=summary).
if exists('+numberwidth')
set numberwidth=1
endif
" Display the ruler with current line/file position. If 'statusline' is used
" then this only affects <C-G>.
set ruler
" Display partial commands in the status line.
" Don't redraw screen when executing macros; increases speed. Thanks to James
" Vega (http://git.jamessan.com/?p=etc/vim.git;a=summary).
set lazyredraw
" Visualize the line the cursor is currently in.
if exists('+cursorline')
set cursorline
endif
" Highlight all matches on the screen when searching. Use <C-L> (see below) to
" remove the highlighting until the next search.
set hlsearch
" Display some special characters.
"set list
set listchars=
" Display tabs as ">--------".
set listchars+=tab:>-
" Display trailing whitespace as "-".
set listchars+=trail:-
" Display markers for long lines when wrapping is disabled.
set listchars+=extends:>,precedes:<
" Display non-breakable space as "!".
if v:version >= 700
set listchars+=nbsp:!
endif
" Don't draw the vertical split separator by using space as character. Thanks
" to scp1 in #vim on Freenode (2012-06-16 16:12 CEST) for the idea to use a
" non-breakable space. But a simple space works as well, as long as the
" current color scheme is not reset.
if has('windows') && has('folding')
set fillchars+=vert:\ " comment to prevent trailing whitespace
endif
if has('statusline')
" Always display the status line even if there is only one window.
set laststatus=2
" If there's more than one buffer return "/<nr>" (e.g. "/05") where <nr>
" is the highest buffer number, otherwise return nothing. Used in
" 'statusline' to get an overview of available buffer numbers.
function! s:StatuslineBufferCount()
let l:bufnr = bufnr('$')
if l:bufnr > 1
let l:result = '/'
if exists('*printf')
let l:result .= printf('%02d', l:bufnr)
else
" Older Vims don't have printf() (and no .= either). Emulate
" "%02d".
if l:bufnr < 10
let l:result = l:result . '0'
endif
let l:result = l:result . l:bufnr
endif
return l:result
else
return ''
endif
endfunction
" Like %f but use relative filename if it's shorter than the absolute path
" (e.g. '../../file' vs. '~/long/path/to/file'). fnamemodify()'s ':.' is
" not enough because it doesn't create '../'s.
function! s:StatuslineRelativeFilename()
" Display only filename for help files.
if &buftype == 'help'
return expand('%:t')
endif
" Special case for scratch files.
if &buftype == 'nofile'
return '[Scratch]'
endif
let l:path = expand('%')
" No file.
if l:path == ''
return '[No Name]'
endif
" Path is already relative, nothing to do.
if stridx(l:path, '/') != 0
return l:path
endif
" Absolute path to this file.
let l:path = expand('%:p')
" Shortened path to this file, thanks to bairui in #vim on Freenode
" (2012-06-23 00:54) for the tip to use fnamemodify(). This is what
" Vim normally uses as %f (minus some exceptions).
let l:original_path = fnamemodify(l:path, ':~')
" Absolute path to the current working directory.
let l:cwd = getcwd()
" Working directory completely contained in path, replace it with a
" relative path. Happens for example when opening a file with netrw.
" %f displays this as absolute path, but we want a relative path of
" course.
if stridx(l:path, l:cwd) == 0
return strpart(l:path, strlen(l:cwd) + 1)
endif
let l:path_list = split(l:path, '/')
let l:cwd_list = split(l:cwd, '/')
" Remove the common path.
while l:path_list[0] == l:cwd_list[0]
call remove(l:path_list, 0)
call remove(l:cwd_list, 0)
endwhile
" Add as many '..' as necessary for the relative path and join the
" path. Thanks to Raimondi in #vim on Freenode (2012-06-23 01:13) for
" the hint to use repeat() instead of a loop.
let l:path = repeat('../', len(l:cwd_list)) . join(l:path_list, '/')
" Use the shorter path, either relative or absolute.
if strlen(l:path) < strlen(l:original_path)
return l:path
else
return l:original_path
endif
endfunction
" Display unexpected 'fileformat', 'fileencoding' and 'bomb' settings.
function! s:StatuslineFileFormat()
if &fileformat != 'unix'
return '[' . &fileformat . ']'
else
return ''
endif
endfunction
function! s:StatuslineFileEncoding()
if &fileencoding != '' && &fileencoding != 'utf-8'
\ && &filetype != 'help'
return '[' . &fileencoding . ']'
else
return ''
endif
endfunction
function! s:StatuslineFileBOMB()
if exists('+bomb') && &bomb
return '[BOM]'
else
return ''
endif
endfunction
" Return current syntax group in brackets or nothing if there's none.
function! s:StatuslineSyntaxGroup()
let l:group = synIDattr(synID(line('.'), col('.'), 1), 'name')
if l:group != ''
return '[' . l:group . '] '
else
return ''
endif
endfunction
" Short function names to make 'statusline' more readable.
function! SBC()
return s:StatuslineBufferCount()
endfunction
function! SRF()
return s:StatuslineRelativeFilename()
endfunction
function! SFF()
return s:StatuslineFileFormat()
endfunction
function! SFE()
return s:StatuslineFileEncoding()
endfunction
function! SFB()
return s:StatuslineFileBOMB()
endfunction
function! SSG()
return s:StatuslineSyntaxGroup()
endfunction
set statusline=
" on the left
set statusline+=%02n " buffer number
set statusline+=%{SBC()} " highest buffer number
set statusline+=:
if has('modify_fname') && v:version >= 700 " some functions need 7.0
set statusline+=%{SRF()} " path to current file
set statusline+=\ " space after path
else
set statusline+=%f\ " path to current file in buffer
endif
set statusline+=%h " [help] if buffer is help file
set statusline+=%w " [Preview] if buffer is preview buffer
set statusline+=%m " [+] if buffer was modified,
" [-] if 'modifiable' is off
set statusline+=%r " [RO] if buffer is read only
if v:version >= 700 " %#..# needs 7.0
set statusline+=%#Error# " display warnings
set statusline+=%{SFF()} " - unexpected file format
set statusline+=%{SFE()} " - unexpected file encoding
set statusline+=%{SFB()} " - unexpected file byte order mask
set statusline+=%## " continue with normal colors
endif
" on the right
set statusline+=%= " right align
set statusline+=0x%-8B\ " current character under cursor as hex
set statusline+=%{gutentags#statusline()}
set statusline+=%-12.(%l,%c%V%)\ " line number (%l),
" column number (%c),
" virtual column number if different
" than %c (%V)
set statusline+=%P " position in file in percent
endif
set display=lastline
set showfulltag
" first, enable status line always
set laststatus=2
" now set it up to change the status line based on mode
if version >= 700
au InsertEnter * hi StatusLine cterm=none ctermfg=black ctermbg=green
au InsertLeave * hi StatusLine cterm=none ctermfg=white ctermbg=black
endif
" Behaviour
set cinoptions+=t0
" enables forward delete including newlines
set backspace=2
set complete+=k
set shell=/bin/bash
set mouse-=a
" Use UTF-8 for all internal data (buffers, registers, etc.). This doesn't
" affect reading files in different encodings, see 'fileencodings' for that.
set encoding=utf-8
" Don't store swap files in the same directory as the edited file, but only if
" we have a "safe" writable directory available.
if filewritable('~/.tmp') == 2 || filewritable('~/tmp') == 2
set directory-=.
else
" But store them in ~/.tmp or ~/tmp (already set by default) if available.
set directory^=~/.tmp
endif
" Make sure Vim (and not Vi) settings are used.
set autoread
" Disable modelines as they may cause security problems. Instead use
" securemodelines (Vim script #1876).
set nomodeline
" Complete to longest common string (list:longest) and then complete all full
" matches after another (full). Thanks to pbrisbin
" (http://pbrisbin.com:8080/dotfiles/vimrc).
set wildmode=list:longest,full
" Ignore case when completing files/directories.
if exists('+wildignorecase')
set wildignorecase
endif
" Show completion menu even if only one entry matches.
if exists('+completeopt')
set completeopt+=menuone
endif
" Increase history of executed commands (:) and search patterns (/).
set history=1000
" Increase number of possible undos.
set undolevels=1000
" Remember marks (including the last cursor position) for more files. ^= is
" necessary because 'viminfo' is parsed from the beginning and the first match
" is used.
if has('viminfo')
set viminfo^='1000
endif
" Use strong encryption if possible, also used for swap/undo files.
if exists('+cryptmethod')
set cryptmethod=blowfish
endif
" HELPER FUNCTIONS
if has('eval')
" Check if the given syntax group is available. Thanks to bairui in #vim on
" Freenode (2012-02-19 01:15 CET) for the try/catch silent highlight idea.
function! s:HasSyntaxGroup(group)
try
execute 'silent highlight ' . a:group
" \a = [A-Za-z]
catch /^Vim\%((\a\+)\)\=:E411/ " 'highlight group not found'
return 0
endtry
return 1
endfunction
" Check if the given Vim version and patch is available.
function! s:HasVersionAndPatch(version, patch)
return v:version > a:version
\ || (v:version == a:version && has('patch' . a:patch))
endfunction
endif
set showmatch
set ignorecase
set smartcase
set ruler
set t_Co=256
set showcmd " show command in the last line
set scrolloff=1 " keep one line above and below current scroll position
set sidescrolloff=5 " keep 5 columns to the left and right
source ~/.vim/macros.vim
" Tip #370: always cd to the current file's directory
autocmd BufEnter * if bufname("") !~ "^\[A-Za-z0-9\]*://" | lcd %:p:h | endif
" search
set hlsearch " highlight search terms
set incsearch " incremental searching
set ignorecase " searches are case insensitive ...
set smartcase " ... unless they contain at least one capital letter
" files
"set directory=~/.vim/files/swap " don't save swap files to .
" menu and completion
set wildmenu
set wildmode=longest:full
" Copy and Paste
set pastetoggle=<F2>
" Bind nohl
" Removes highlight of your last search
"noremap <C-n> :nohl<CR>
"vnoremap <C-n> :nohl<CR>
"inoremap <C-n> :nohl<CR>
" Search
set hlsearch
set incsearch
set infercase
" EDIT SETTINGS
" Use UTF-8 file encoding for all files. Automatically recognize latin1 in
" existing files.
set fileencodings=utf-8,latin1
" Always use unix line-endings for new files.
set fileformats=unix,dos
" Set tabs to 4 spaces, use softtabs.
set shiftwidth=4
set softtabstop=4
set expandtab
" When < and > is used indent/deindent to the next 'shiftwidth' boundary.
set shiftround
" Use the default value for real tabs.
set tabstop=8
" Enable auto indention.
set autoindent
" When joining lines only add one space after a sentence.
set nojoinspaces
" Allow backspacing over autoindent and line breaks.
"set backspace=indent,eol
" Start a comment when hitting enter after a commented line (r) and when using
" o or O around a commented line (o).
set formatoptions+=ro
" Don't break a line if was already longer then 'textwidth' when insert mode
" started.
set formatoptions+=l
" Remove comment leader when joining lines where it makes sense.
if s:HasVersionAndPatch(703, 541)
set formatoptions+=j
endif
" Allow virtual editing (cursor can be positioned anywhere, even when there is
" no character) in visual block mode.
set virtualedit=block
" Already display matches while typing the search command. This makes spotting
" typos easy and searching faster.
set incsearch
"" Activate syntax folding.
if has('folding')
set foldmethod=syntax
" Only use fold column if we have enough space (for example not in a
" (virtual) terminal which has only 80 columns).
"if &columns > 80
"set foldcolumn=2
"endif
set foldlevel=99 " no closed folds at default, 'foldenable' would disable
" folding which is not what I want
" Don't open folds for block movements like '(', '{', '[[', '[{', etc.
set foldopen-=block
" Enable folding with the spacebar
nnoremap <space> za
endif
" Only check case if the searched word contains a capital character.
set ignorecase
set smartcase
" Activate spell checking, use English as default.
if exists('+spell') && has('syntax')
" But not when diffing because spell checking is distracting in this case.
if !&diff
set spell
endif
"set spelllang=de_DE
"set dictionary+=/usr/share/words
"autocmd FileType mail :nmap <F8> :w<CR>:!aspell -e -c %<CR>:e<CR>
set spelllang=en_us
endif
" Programming
" c, c++, c#, java, objc
set cinoptions+=t0
autocmd Filetype c,cpp,cs,java,objc set cindent
autocmd Filetype c,cpp,cs,java,objc set cst csto=0
" C
au BufRead,BufNewFile *.c,*.h set expandtab
au BufRead,BufNewFile *.c,*.h set tabstop=4
au BufRead,BufNewFile *.c,*.h set shiftwidth=4
au BufRead,BufNewFile *.c,*.h set autoindent
au BufRead,BufNewFile *.c,*.h match BadWhitespace /^\t\+/
au BufRead,BufNewFile *.c,*.h match BadWhitespace /\s\+$/
au BufNewFile *.c,*.h set fileformat=unix
au BufRead,BufNewFile *.c,*.h let b:comment_leader = '/* '
" python
" Python, PEP-008
au BufRead,BufNewFile *.py,*.pyw set expandtab
au BufRead,BufNewFile *.py,*.pyw set textwidth=139
au BufRead,BufNewFile *.py,*.pyw set tabstop=4
au BufRead,BufNewFile *.py,*.pyw set softtabstop=4
au BufRead,BufNewFile *.py,*.pyw set shiftwidth=4
au BufRead,BufNewFile *.py,*.pyw set autoindent
au BufRead,BufNewFile *.py,*.pyw match BadWhitespace /^\t\+/
au BufRead,BufNewFile *.py,*.pyw match BadWhitespace /\s\+$/
au BufNewFile *.py,*.pyw set fileformat=unix
au BufRead,BufNewFile *.py,*.pyw let b:comment_leader = '#'
autocmd Filetype python set makeprg=pychecker
autocmd Filetype python map <F5> :!python % <CR>
autocmd Filetype python map <F7> :make % <CR>
autocmd Filetype python set tabstop=4
autocmd Filetype python set shiftwidth=4
" Multi-windowing. CTRL+[HJKL] to switch windows and maximize
map <C-S> <C-W>s
map <C-D> <C-W>v
map <C-J> <C-W>j
map <C-K> <C-W>k
map <C-H> <C-W>h
map <C-L> <C-W>l
" Ctrl-B is 'build'
imap <C-b> <Esc>:w<CR>:silent! make \| redraw!<CR>:cw<CR>
nmap <C-b> :w<CR>:silent! make \| redraw!<CR>:cw<CR>
vmap <C-b> :w<CR>:silent! make \| redraw!<CR>:cw<CR>
" This beauty remembers where you were the last time you edited the file, and returns to the same position.
au BufReadPost * if line("'\"") > 0|if line("'\"") <= line("$")|exe("norm '\"")|else|exe "norm $"|endif|endif
"execute pathogen#infect()
syntax on
"let mapleader = ""
" minibufexplorer
let g:miniBufExplMapWindowNavVim = 1
let g:miniBufExplMapWindowNavArrows = 1
let g:miniBufExplMapCTabSwitchBufs = 1
let g:miniBufExplModSelTarget = 1
" window navigation
map <c-l> <c-w>l
map <c-j> <c-w>j
map <c-k> <c-w>k
map <c-h> <c-w>h
"map <C-S-l> <c-w><s-l>
"map <C-S-j> <c-w><s-j>
"map <C-S-k> <c-w><s-k>
"map <C-S-h> <c-w><s-h>
" Python mode plugin
map <Leader>g :call RopeGotoDefinition()<CR>
let ropevim_enable_shortcuts = 1
let g:pymode_rope_goto_def_newwin = "vnew"
let g:pymode_rope_extended_complete = 1
let g:pymode_breakpoint = 0
let g:pymode_syntax = 1
let g:pymode_syntax_builtin_objs = 0
let g:pymode_syntax_builtin_funcs = 0
map <Leader>b Oimport ipdb; ipdb.set_trace() # BREAKPOINT<C-c>
"tab complete
function! InsertTabWrapper(direction)
let col = col('.') - 1
if !col || getline('.')[col - 1] !~ '\k'
return "\<tab>"
elseif "backward" == a:direction
return "\<c-p>"
else
return "\<c-n>"
endif
endfunction
inoremap <tab> <c-r>=InsertTabWrapper ("forward")<cr>
"inoremap <s-tab> <c-r>=InsertTabWrapper ("backward")<cr>
" Mappings
nmap <C-i> :TagbarToggle<CR>
" Make last active window the only window. Similar to <C-W> o.
nnoremap <C-W>O <C-W>p<C-W>o
set nospell
" Maps to change spell language between English and German and disable spell
" checking.
if exists('+spell')
nnoremap <silent> <Leader>sn :set nospell<CR>
nnoremap <silent> <Leader>se :set spell spelllang=en_us<CR>
nnoremap <silent> <Leader>sd :set spell spelllang=de_de<CR>
" If no spell support is available, these mappings do nothing.
else
nmap <Leader>sn <Nop>
nmap <Leader>se <Nop>
nmap <Leader>sd <Nop>
endif
" SYNTAX SETTINGS
" Activate syntax coloring.
if has('syntax')
syntax enable
" Don't highlight more than 500 columns as I normally don't have that long
" lines and they slow down syntax coloring. Thanks to Derek Wyatt
" (http://www.derekwyatt.org/vim/the-vimrc-file/).
if exists('+synmaxcol')
set synmaxcol=500
endif
" Use (limited) syntax based omni completion if no other omni completion is
" available. Taken from :help ft-syntax-omni.
if has('autocmd') && exists('+omnifunc')
augroup vimrc
autocmd FileType *
\ if &omnifunc == '' |
\ setlocal omnifunc=syntaxcomplete#Complete |
\ endif
augroup END
endif
" Function to enable all custom highlights. Necessary as highlights are
" window-local and thus must be set for each new window.
function! s:CustomSyntaxHighlights()
" Not the first time called, nothing to do.
if exists('w:vimrc_syntax_run')
return
endif
let w:vimrc_syntax_run = 1
" Highlight lines longer than 78 characters. Thanks to Tony Mechelynck
" <[email protected]> from the Vim mailing list. It can easily be
" disabled when necessary with :2match (in Vim >= 700).
" if !&diff && exists(':2match')
" 2match Todo /\%>78v./
" elseif !&diff
" match Todo /\%>78v./
" endif
if exists('*matchadd')
" Highlight some important keywords in all documents.
let l:todos = ['TODO', 'XXX', 'FIXME',
\ 'CHANGED', 'REMOVED', 'DELETED']
" Compatibility fix for Vim 6.4 which can't handle for in function
" (without function it's ignored).
execute ' for l:x in l:todos'
\ '| call matchadd("Todo", l:x)'
\ '| endfor'
" Highlight Unicode whitespace which is no normal whitespace (0x20).
let l:spaces = ['00a0', '1680', '180e', '2000', '2001', '2002',
\ '2003', '2004', '2005', '2006', '2007', '2008',
\ '2009', '200a', '200b', '200c', '200d', '202f',
\ '205f', '2060', '3000', 'feff']
" Compatibility fix for Vim 6.4. Escape \ inside the " string or
" it won't work!
execute ' for l:x in l:spaces'
\ '| call matchadd("Error", "\\%u" . l:x)'
\ '| endfor'
endif
endfunction
" Enable highlights for the current and all new windows. Thanks to bairui in
" #vim on Freenode (2012-04-01 00:22 CEST) for the WinEnter suggestion.
call s:CustomSyntaxHighlights()
if has('autocmd')
augroup vimrc
autocmd WinEnter * call s:CustomSyntaxHighlights()
augroup END
endif
" Settings for specific filetypes.
" C
let g:c_no_if0_fold = 1 " fix weird double fold in #if0 in recent versions
" Haskell.
let g:hs_highlight_delimiters = 1
let g:hs_highlight_boolean = 1
let g:hs_highlight_types = 1
let g:hs_highlight_more_types = 1
" Java.
let g:java_highlight_java_lang_ids = 1 " color java.lang.* identifiers
" Perl.
let g:perl_fold = 1
let g:perl_fold_blocks = 1
let g:perl_nofold_packages = 1
let g:perl_include_pod = 1 " syntax coloring for PODs
" PHP.
let g:php_folding = 3 " fold functions
let g:php_short_tags = 0 " no short tags (<? .. ?>), not always usable
let g:php_sql_query = 1 " highlight SQL queries in strings
" Python.
let g:python_highlight_all = 1
" Shell.
let g:sh_noisk = 1 " don't add . to 'iskeyword'
let g:sh_is_posix = 1 " POSIX shell (e.g. dash) is compatible enough
let g:sh_fold_enabled = 7 " functions (1), heredoc (2) and if/do/for (4)
" Vim.
let g:vimsyn_embed = 0 " don't highlight embedded languages
let g:vimsyn_folding = 'af' " folding for autogroups (a) and functions (f)
" XML.
let g:xml_syntax_folding = 1
endif
" auto commands
" Fix to allow Vim edit crontab files as crontab doesn't work with
" backupcopy=auto.
autocmd FileType crontab setlocal backupcopy=yes
" PLUGIN SETTINGS
if has('eval')
" Use pathogen which allows one 'runtimepath' entry per plugin. This makes
" installing/removing/updating plugins simple. (Used for plugins with more
" than one file.) Ignore errors in case pathogen is not installed.
"if v:version >= 700
"silent! execute 'call pathogen#infect()'
"endif
" Settings for securemodelines.
" Only allow items I need (also includes spl which is not enabled by
" default).
if v:version >= 700 " need lists
let g:secure_modelines_allowed_items = ['ft', 'spl', 'fdm',
\ 'sw', 'sts', 'noet']
endif
" Settings for the NERD commenter.
" Don't create any mappings I don't want to use.
let g:NERDCreateDefaultMappings = 0
" Map toggle comment.
nmap <C-c> <Plug>NERDCommenterToggle
vmap <C-c> <Plug>NERDCommenterToggle
" Settings for the NERD tree.
autocmd StdinReadPre * let s:std_in=1
autocmd VimEnter * if argc() == 0 && !exists("s:std_in") | NERDTree | endif
autocmd bufenter * if (winnr("$") == 1 && exists("b:NERDTree") && b:NERDTree.isTabTree()) | q | endif
autocmd StdinReadPre * let s:std_in=1
autocmd VimEnter * if argc() == 1 && isdirectory(argv()[0]) && !exists("s:std_in") | exe 'NERDTree' argv()[0] | wincmd p | ene | exe 'cd '.argv()[0] | endif
map <C-n> :NERDTreeToggle<CR>
" XPTemplate settings.
" Try to maintain snippet rendering even after editing outside of a
" snippet.
let g:xptemplate_strict = 0
" Don't complete any braces automatically.
let g:xptemplate_brace_complete = 0
" Only highlight the current placeholder.
let g:xptemplate_highlight = 'current'
" CtrlP settings.
" Don't manage the working directory (the default setting is too slow for
" me).
let g:ctrlp_working_path_mode = 0
" Path to cache directory. I prefer to keep generated files as local as
" possible.
let g:ctrlp_cache_dir = $HOME . '/.cache/ctrlp'
" Permanent cache, cleared by a crontab entry. Use <F5> to update the
" cache manually.
let g:ctrlp_clear_cache_on_exit = 0
" Don't switch the window if the selected buffer is already open. I want
" to open another view on this buffer in most cases.
let g:ctrlp_switch_buffer = 0
nnoremap <c-f> :CtrlPTag<cr>
" FSWitch settings.
" Defaults don't work well for my projects.
augroup vimrc
autocmd BufEnter *.cc let b:fswitchdst = 'h'
\ | let b:fswitchlocs = './'
autocmd BufEnter *.h let b:fswitchdst = 'cc,c'
\ | let b:fswitchlocs = './'
augroup END
" Switch to corresponding header/source file.
nnoremap <silent> <Leader>h :FSHere<CR>
" netrw settings.
" Don't create ~/.vim/.netrwhist history file.
let g:netrw_dirhistmax = 0
endif
" vim-move plugin: use ctrl
let g:move_key_modifier = 'S'
let g:gutentags_cache_dir = '~/.cache/gutentags'
" let g:gutentags_ctags_executable = 'ctags-universal'
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment