Dewarping 360 degree video using python.

dewarp.py

from SimpleCV import Camera, VideoStream, Color, Display, Image, VirtualCamera
import cv2
import numpy as np
import time

# build the mapping
def buildMap(Ws,Hs,Wd,Hd,R1,R2,Cx,Cy):
    map_x = np.zeros((Hd,Wd),np.float32)
    map_y = np.zeros((Hd,Wd),np.float32)
    for y in range(0,int(Hd-1)):
        for x in range(0,int(Wd-1)):
            r = (float(y)/float(Hd))*(R2-R1)+R1
            theta = (float(x)/float(Wd))*2.0*np.pi
            xS = Cx+r*np.sin(theta)
            yS = Cy+r*np.cos(theta)
            map_x.itemset((y,x),int(xS))
            map_y.itemset((y,x),int(yS))
        
    return map_x, map_y
# do the unwarping 
def unwarp(img,xmap,ymap):
    output = cv2.remap(img.getNumpyCv2(),xmap,ymap,cv2.INTER_LINEAR)
    result = Image(output,cv2image=True)
    return result


disp = Display((800,600))
vals = []
last = (0,0)
# Load the video from the rpi
vc = VirtualCamera("video.h264","video")
# Sometimes there is crud at the begining, buffer it out
for i in range(0,10):
    img = vc.getImage()
    img.save(disp)
# Show the user a frame let them left click the center
# of the "donut" and the right inner and outer edge
# in that order. Press esc to exit the display
while not disp.isDone():
    test = disp.leftButtonDownPosition()
    if( test != last and test is not None):
        last = test
        vals.append(test)

# 0 = xc yc
# 1 = r1
# 2 = r2
# center of the "donut"    
Cx = vals[0][0]
Cy = vals[0][1]
# Inner donut radius
R1x = vals[1][0]
R1y = vals[1][1]
R1 = R1x-Cx
# outer donut radius
R2x = vals[2][0]
R2y = vals[2][1]
R2 = R2x-Cx
# our input and output image siZes
Wd = 2.0*((R2+R1)/2)*np.pi
Hd = (R2-R1)
Ws = img.width
Hs = img.height
# build the pixel map, this could be sped up
print "BUILDING MAP!"
xmap,ymap = buildMap(Ws,Hs,Wd,Hd,R1,R2,Cx,Cy)
print "MAP DONE!"
# do an unwarping and show it to us
result = unwarp(img,xmap,ymap)
result.save(disp)

# SimpleCV/OpenCV video out was giving problems
# decided to output frames and convert using
# avconv / ffmpeg. 

# I used these params for converting the raw frames to video
# avconv -f image2 -r 30 -v:b 1024K -i samples/lapinsnipermin/%03d.jpeg output.mpeg
i = 0
while img is not None:
    result = unwarp(img,xmap,ymap)
    # Once we get an image overlay it on the source
    derp = img.blit(result,(0,img.height-result.height))
    derp = derp.applyLayers()
    derp.save(disp)
    fname = "FRAME{num:05d}.png".format(num=i)
    derp.save(fname)
    #vs.writeFrame(derp)
    # get the next frame
    img = vc.getImage()
    i = i + 1

Hi, I need to get the video from 4 realcams and dewarp them ,, Could you please help to start it ..

I dont know how to start ..

Do you guys have any examples of the video frames before and after the conversion?

ModuleNotFoundError: No module named 'SimpleCV'

https://simplecv.readthedocs.io/en/latest/HOWTO-Install%20on%20RaspberryPi.html

Is it possible to use this for live stream?