Connmanctl Cheat Sheet

connmanctl.md

Connmanctl Cheat Sheet

• Documentation @ http://git.kernel.org/cgit/network/connman/connman.git/tree/doc

Configure WiFi

• Scan for access points (run multiple times for more complete scan):

    # connmanctl scan wifi
    Scan completed for wifi
  

• Display access points discovered:

    # connmanctl services
    *AO Wired                ethernet_9059af5f4217_cable
        HOME-0842            wifi_009e959b585c_484f4d452d30383432_managed_psk
        ATT440               wifi_009e959b585c_415454343430_managed_psk
        andent               wifi_009e959b585c_616e64656e74_managed_psk
                             wifi_009e959b585c_hidden_managed_psk
        ATT512               wifi_009e959b585c_415454353132_managed_psk
        GoldenBearTriangle   wifi_009e959b585c_476f6c64656e42656172547269616e676c65_managed_psk
        Mr. Pamuk            wifi_009e959b585c_4d722e2050616d756b_managed_psk
        thegirls             wifi_009e959b585c_7468656769726c73_managed_psk
        HappyDays            wifi_009e959b585c_486170707944617973_managed_psk
        tipsycoopaloop       wifi_009e959b585c_7469707379636f6f70616c6f6f70_managed_psk
        2BlueWiFi            wifi_009e959b585c_32426c756557694669_managed_psk
  

• Displays details on the AP of interest:

    # connmanctl services wifi_009e959b585c_32426c756557694669_managed_psk
    /net/connman/service/wifi_009e959b585c_32426c756557694669_managed_psk
      Type = wifi
      Security = [ psk ]
      State = idle
      Strength = 63
      Favorite = False
      Immutable = False
      AutoConnect = False
      Name = 2BlueWiFi
      Ethernet = [ Method=auto, Interface=wlan0, Address=00:9E:95:9B:58:5C, MTU=1500 ]
      IPv4 = [  ]
      IPv4.Configuration = [ Method=dhcp ]
      IPv6 = [  ]
      IPv6.Configuration = [ Method=auto, Privacy=disabled ]
      Nameservers = [  ]
      Nameservers.Configuration = [  ]
      Timeservers = [  ]
      Timeservers.Configuration = [  ]
      Domains = [  ]
      Domains.Configuration = [  ]
      Proxy = [  ]
      Proxy.Configuration = [  ]
      Provider = [  ]
  

• Write config file for connecting to secure AP:

    # cat << EOF > /var/lib/connman/<SSID>-psk.config
    [service_wifi_<hash>_managed_psk]
    Type = wifi
    Name = <SSID>
    Passphrase = <passphrase>
    EOF
  

  • Should be automatically re-read without needing to restart connman.
  • Verify this worked correctly by re-running connmanctl services and observe Immutable, AutoConnect and Favorite are set to true.

• Connect to the new secure AP:

    # connmanctl connect wifi_009e959b585c_32426c756557694669_managed_psk
  

  • Verify correct operation by running connmanctl services and observe the local interface address as well as DNS. Also can check ip addr ls and cat /etc/resolv.conf

Comments / Issues

• WiFi driver + connman-1.17 + beaglebone appears to be buggy with connmanctl disable/enable
• Connmanctl connect seems buggy, potential it calls enable?

@TylerCox: Thanks, I think what I want to do is not wanted, because of security aspects.

Maybe it would be nice to add this to the cheat sheet:

"The symbols in the output above are: '*' favorite (saved) network, 'A' autoconnectable, 'O' online and 'R' ready. If no letter is shown in the O/R column, the network is not connected. In addition, temporary states include 'a' for association, 'c' configuration and 'd' disconnecting. When any of these three letters are showing, the network is in the process of connecting or disconnecting."
found at this point: https://01.org/connman/documentation

It worked for me by following this tutorial

https://www.ev3dev.org/docs/tutorials/setting-up-wifi-using-the-command-line/