Our goal is to run python -c "import caffe" without crashing. For anyone who doesn't spend most of their time with build systems, getting to this point can be extremely difficult on OS X. Instead of providing a list of steps to follow, I'll try to explain why each step happens.
This page has OS X specific install instructions.
I assume:
- You are using OS X 10.9+ (I'm using 10.10.5)
- You have downloaded Caffe (this was written against commit
4c561fdd7e69ba67e891166c9d700ec6bf46ef74) - You have Xcode installed. Run
xcode-select --installto verify that the command line tools are installed. - You have Homebrew installed.
The first dependency is downloading and installing CUDA and CuDNN. CUDA installs itself in /Developer/NVIDIA/ and symlinks to /usr/local/cuda/. I move the CuDNN 7.0 r3 folder cudnn to /Developer/NVIDIA/ and rename it to CuDNN-7.0-r3. Usually this would be placed somewhere else, like /usr/local/cudnn but I decided to do something similar to the CUDA installer.
Next, we will install Python with homebrew: brew install python. Caffe recommends using Anaconda, but as far as I can tell it only helps by bundling a few modules (numpy, scipy, sklearn) that we can just as easily install with pip at the end.
When homebrew asks you to run pip install --upgrade pip setuptools only run pip install --upgrade pip. Otherwise you will have conflicts between a Python 2 and Python 3 installation.
Then we run the following as stated in the document, which will download and install a bunch of prerequisites for Caffe. The installation instructions assume you have numpy and protobuf installed. If not, first run:
brew install numpy protobuf
Then continue with the recommended steps:
brew install -vd snappy leveldb gflags glog szip lmdb
brew tap homebrew/science
brew install hdf5 opencv
boost and boost-python need to be installed from source. However version 1.58 is incompatible. To fix this we will modify the Homebrew formulas. Run brew edit boost, replace the contents with this formula and brew edit boost-python and use this formula. If you're having trouble with the default brew editor, run export HOMEBREW_EDITOR='open -t' in Terminal before running brew edit to change the editor. When you are done with this tutorial, replace the formula files with their original formulas by opening /usr/local/Library/Formula/ and running git checkout -- ..
For now, continue as recommended:
brew install --build-from-source --with-python -vd protobuf
brew install --build-from-source -vd boost boost-python
At this point we need to make sure that two things are the case:
- All shared libraries that reference a C++ standard library are using
libc++and notlibstdc++ boost-pythonis linked against the Homebrew-installed Python, not the system python (because we will also link Caffe against Homebrew's Python, and because pip is using Homebrew's Python).
We can check this with otool -L:
$ brew info boost
...
$ otool -L /usr/local/Cellar/boost/1.57.0/lib/libboost_system.dylib # this is one of the libs that caffe links against
...
/usr/lib/libc++.1.dylib (compatibility version 1.0.0, current version 120.0.0)
...
$ brew info boost-python
...
$ otool -L /usr/local/Cellar/boost-python/1.57.0/lib/libboost_python.dylib
...
/usr/local/Frameworks/Python.framework/Versions/2.7/Python (compatibility version 2.7.0, current version 2.7.0)
...
It looks like Boost is the right version (1.57.0) and it's linking against the right libraries. If it's not, you will get Sigabrt and other strange errors from Python later when you try to import caffe.
If we were running an older versions of OS X, it would use libstdc++ by default for compiling Caffe, which means all the Homebrew formulas would have to be modified to match. Since we're using a newer version we don't have to do this.
Next, we adjust the Makefile.config:
- Uncomment
USE_CUDNN := 1because we want to use it. - Edit the
PYTHON_INCLUDE. The example values use the system path for Python. We modify them to use the Homebrew path:PYTHON_INCLUDE := /usr/local/lib/python2.7/site-packages/numpy/core/include/ /usr/local/Cellar/python/2.7.10/Frameworks/Python.framework/Versions/2.7/include/python2.7. - For the same reason as the previous step, edit
PYTHON_LIB:PYTHON_LIB := /usr/local/Cellar/python/2.7.10/Frameworks/Python.framework/Versions/2.7/lib/ - Uncomment
WITH_PYTHON_LAYER := 1. - Change the
INCLUDE_DIRSto add CuDNN:INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include /Developer/NVIDIA/CuDNN-7.0-r3/include - Change the
LIBRARY_DIRSto add CuDNN:LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib /Developer/NVIDIA/CuDNN-7.0-r3/lib. It's very important that$(PYTHON_LIB)comes first here, otherwisemakewill try to use the system python that it finds in/usr/lib. - Do not change
BLAS := atlas. By default this will cause Caffe to link with Accelerate, which is a fast BLAS implementation provided by Apple with OS X.
Run make all from the main Caffe directory. If you have a quad-core processor or better you can type make all -j4 to speed up compilation a bit. Here are some errors you might run into with make:
- If it complains about a specific library, you could have missed one of the prerequisites. Check with
brew info x, wherexis the name of the library it's complaining about, that it's correctly installed. - If it complains that something is
not found for architecture x86_64, this islibstc++vslibc++mistmatch and you'll need to double-check all the prerequisites installed by Homebrew that they don't saylibstdc++in theotool -Loutput. - If it complains about
pyconfig.h, make sure you are passing the right Python path toPYTHON_INCLUDE. For example, open/usr/local/Cellar/python/2.7.10/Frameworks/Python.framework/Versions/2.7/include/python2.7to see thatpyconfig.his in there. If not, you need to install Python with brew, or the path is different for your installation (e.g., a different version number like2.7.11).
Once make all finishes, run make pycaffe.
Next, make sure some system variables are configured correctly for Python. Open your ~/.bash_profile in a text editor (e.g., nano ~/.bash_profile). If you're using TextEdit to edit ~/.bash_profile make sure smart quotes are turned off. Add these three lines:
export DYLD_LIBRARY_PATH='/Developer/NVIDIA/CuDNN-7.0-r3/lib':$DYLD_LIBRARY_PATH
export DYLD_LIBRARY_PATH='/usr/local/cuda/lib/':$DYLD_LIBRARY_PATH
export PYTHONPATH=~/Documents/caffe/python:$PYTHONPATH
The first two tell Python where to load the dylibs for CUDA and CuDNN from. The third line tells Python where to load pycaffe from. Customize the third line so it matches where you have caffe installed.
Now, if we try to test with python -c "import caffe" we will get an error No module named skimage.io. So we run pip install scikit-image. If we test again, No module named scipy so we pip install scipy. Finally, testing one more time:
$ python
>>> import caffe
>>>
Success.
If you want to install Caffe and use it with the system Python, or even with Anaconda Python, this whole process might be easier (or slightly better documented), but I haven't tried that since I started with a Homebrew-installed version of Python. But if you use another version of Python, I recommend there is only one Python on your system, and you shoud leave all the values for Python paths with their defaults.
Hi @kylemcdonald thanks for the guide.
You are correct that using
import caffethrowing up errors (bumpy version related) which was messy to correct.Was able to follow your steps.
make runtest -j4 is throwing the following errors:
.build_release/tools/caffe dyld: Library not loaded: @rpath/libcudnn.5.dylib Referenced from: /Users/Lana/Downloads/Personal/ML/Caffe/.build_release/tools/caffe Reason: image not found make: *** [runtest] Trace/BPT trap: 5