Arcadyan AW1000 UBoot Log + Outputs

gistfile1.txt

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00158
S - IMAGE_VARIANT_STRING=HAACANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002e5
B -       201 - PBL, Start
B -      2736 - bootable_media_detect_entry, Start
B -      3449 - bootable_media_detect_success, Start
B -      3453 - elf_loader_entry, Start
B -      7634 - auth_hash_seg_entry, Start
B -      7880 - auth_hash_seg_exit, Start
B -     69813 - elf_segs_hash_verify_entry, Start
B -    132655 - PBL, End
B -    147620 - SBL1, Start
B -    200842 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4
B -    207461 - pm_device_init, Start
B -    332846 - PM_SET_VAL:Skip
D -    124867 - pm_device_init, Delta
B -    335286 - pm_driver_init, Start
D -      5398 - pm_driver_init, Delta
B -    341569 - clock_init, Start
D -      2135 - clock_init, Delta
B -    345626 - boot_flash_init, Start
D -     16531 - boot_flash_init, Delta
B -    365847 - boot_config_data_table_init, Start
D -      3995 - boot_config_data_table_init, Delta - (575 Bytes)
B -    373198 - Boot Setting :  0x00000618
B -    377315 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:8
B -    384147 - sbl1_ddr_set_params, Start
B -    387960 - CPR configuration: 0x30c
B -    391406 - cpr_init, Start
B -    394182 - Rail:0 Mode: 5 Voltage: 840000
B -    399397 - CL CPR settled at 792000mV
B -    402234 - Rail:1 Mode: 5 Voltage: 896000
B -    406412 - Rail:1 Mode: 7 Voltage: 944000
D -     16531 - cpr_init, Delta
B -    413305 - Pre_DDR_clock_init, Start
B -    417301 - Pre_DDR_clock_init, End
B -    420595 - DDR Type : PCDDR3
B -    426359 - do ddr sanity test, Start
D -      1067 - do ddr sanity test, Delta
B -    431117 - DDR: Start of HAL DDR Boot Training
B -    435875 - DDR: End of HAL DDR Boot Training
B -    441548 - DDR: Checksum to be stored on flash is 347078735
B -    451857 - Image Load, Start
D -    215971 - QSEE Image Loaded, Delta - (1376448 Bytes)
B -    667919 - Image Load, Start
D -        61 - SEC Image Loaded, Delta - (0 Bytes)
B -    675605 - Image Load, Start
D -     11987 - DEVCFG Image Loaded, Delta - (26008 Bytes)
B -    687683 - Image Load, Start
D -     23028 - RPM Image Loaded, Delta - (86584 Bytes)
B -    710802 - Image Load, Start
D -     88633 - APPSBL Image Loaded, Delta - (563504 Bytes)
B -    799557 - QSEE Execution, Start
D -        61 - QSEE Execution, Delta
B -    805383 - USB D+ check, Start
D -         0 - USB D+ check, Delta
B -    811757 - SBL1, End
D -    666455 - SBL1, Delta
S - Flash Throughput, 6903 KB/s  (2053791 Bytes,  297517 us)
S - DDR Frequency, 466 MHz
S - Core 0 Frequency, 1651 MHz


U-Boot 2016.01 (Mar 19 2021 - 12:06:59 +0800)

DRAM:  smem ram ptable found: ver: 1 len: 4
1 GiB
NAND:  Could not find nand_gpio in dts, using defaults
Not an ONFI device
ONFI probe failed
ID = 2691a398
Vendor = 98
Device = a3
qpic_nand: changing oobsize to 160 from 256 bytes
SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
1024 MiB
MMC:   sdhci: Node Not found, skipping initialization

PCI0 is not defined in the device tree
PCI1 is not defined in the device tree
In:    serial@78B3000
Out:   serial@78B3000
Err:   serial@78B3000
machid: 8010008
MMC Device 0 not found
[arc_board_setting]
[serial_register_init]
Hit any key to stop autoboot:  0

Net:   MAC0 addr:ec:6c:9a:b8:33:ba
PHY ID1: 0x4d
PHY ID2: 0xd0b1
PHY ID1: 0x4d
PHY ID2: 0xd101
EDMA ver 1 hw init
Num rings - TxDesc:1 (0-0) TxCmpl:1 (7-7)
RxDesc:1 (15-15) RxFill:1 (7-7)
ipq807x_edma_alloc_rings: successfull
ipq807x_edma_setup_ring_resources: successfull
ipq807x_edma_configure_rings: successfull
ipq807x_edma_hw_init: successfull
eth0
IPQ807x# ?
?       - alias for 'help'
aq_load_fw- LOAD aq-fw-binary
aq_phy_restart- Restart Aquantia phy
arc_fuseipq- arcadyan fuse QFPROM registers from memory

arc_manuf- arcadyan manufacturing board data utility

base    - print or set address offset
bdinfo  - print Board Info structure
bootipq - bootipq from flash device
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
bootz   - boot Linux zImage image from memory
canary  - test stack canary
chpart  - change active partition
cmp     - memory compare
cp      - memory copy
crc32   - checksum calculation
dcache  - enable or disable data cache
dhcp    - boot image via network using DHCP/TFTP protocol
dm      - Driver model low level access
echo    - echo args to console
env     - environment handling commands
erase   - erase FLASH memory
exectzt - execute TZT

exit    - exit script
false   - do nothing, unsuccessfully
fdt     - flattened device tree utility commands
flash   - flash part_name
        flash part_name load_addr file_size

flasherase- flerase part_name

flinfo  - print FLASH memory information
fuseipq - fuse QFPROM registers from memory

go      - start application at address 'addr'
help    - print command description/usage
i2c     - I2C sub-system
icache  - enable or disable instruction cache
imxtract- extract a part of a multi-image
ipq_mdio- IPQ mdio utility commands
is_sec_boot_enabled- check secure boot fuse is enabled or not

itest   - return true/false on integer compare
loop    - infinite loop on address range
md      - memory display
mii     - MII utility commands
mm      - memory modify (auto-incrementing address)
mmc     - MMC sub system
mmcinfo - display MMC info
mtdparts- define flash/nand partitions
mtest   - simple RAM read/write test
mw      - memory write (fill)
nand    - NAND sub-system
nboot   - boot from NAND device
nm      - memory modify (constant address)
pci     - list and access PCI Configuration Space
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
runmulticore- Enable and schedule secondary cores
saveenv - save environment variables to persistent storage
secure_authenticate- authenticate the signed image

setenv  - set environment variables
sf      - SPI flash sub-system
showvar - print local hushshell variables
sleep   - delay execution for some time
smeminfo- print SMEM FLASH information
source  - run script from memory
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
tftpput - TFTP put command, for uploading files to a server
true    - do nothing, successfully
uart    - UART sub-system
ubi     - ubi commands
usb     - USB sub-system
usbboot - boot from USB device
version - print monitor, compiler and linker version
IPQ807x# version

U-Boot 2016.01 (Mar 19 2021 - 12:06:59 +0800)
arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 5.2.0 038aa3060+r49254) 5.2.0
GNU ld (GNU Binutils) 2.24.0
IPQ807x# smeminfo
flash_type:             0x2
flash_index:            0x0
flash_chip_select:      0x0
flash_block_size:       0x40000
flash_density:          0x100000
partition table offset  0x0
No.: Name             Attributes            Start             Size
  0: 0:SBL1           0x0000ffff              0x0         0x100000
  1: 0:MIBIB          0x0000ffff         0x100000         0x100000
  2: 0:BOOTCONFIG     0x0000ffff         0x200000          0x80000
  3: 0:BOOTCONFIG1    0x0000ffff         0x280000          0x80000
  4: 0:QSEE           0x0000ffff         0x300000         0x300000
  5: 0:QSEE_1         0x0000ffff         0x600000         0x300000
  6: 0:DEVCFG         0x0000ffff         0x900000          0x80000
  7: 0:DEVCFG_1       0x0000ffff         0x980000          0x80000
  8: 0:APDP           0x0000ffff         0xa00000          0x80000
  9: 0:APDP_1         0x0000ffff         0xa80000          0x80000
 10: 0:RPM            0x0000ffff         0xb00000          0x80000
 11: 0:RPM_1          0x0000ffff         0xb80000          0x80000
 12: 0:CDT            0x0000ffff         0xc00000          0x80000
 13: 0:CDT_1          0x0000ffff         0xc80000          0x80000
 14: 0:APPSBLENV      0x0000ffff         0xd00000          0x80000
 15: 0:APPSBL         0x0000ffff         0xd80000         0x100000
 16: 0:APPSBL_1       0x0000ffff         0xe80000         0x100000
 17: 0:ART            0x0000ffff         0xf80000          0x80000
 18: rootfs           0x0000ffff        0x1000000        0x6400000
 19: 0:WIFIFW         0x0000ffff        0x7400000        0x1880000
 20: rootfs_1         0x0000ffff        0x8c80000        0x6400000
 21: 0:WIFIFW_1       0x0000ffff        0xf080000        0x1880000
 22: 0:ETHPHYFW       0x0000ffff       0x10900000         0x240000
 23: 0:board_data     0x0000ffff       0x10b40000         0x100000
 24: 0:arc_datadump   0x0000ffff       0x10c40000         0x800000
 25: 0:arc_data       0x0000ffff       0x11440000       0x2cbc0000
IPQ807x# showvar
HUSH_VERSION=0.01
IPQ807x# sf
sf - SPI flash sub-system

IPQ807x# printenv
baudrate=115200
bootargs=console=ttyMSM0,115200n8 pcie_dev=RG50
bootcmd=bootipq
bootcount=0
bootdelay=2
eth1addr=ec:6c:9a:b8:33:ba
eth2addr=ec:6c:9a:b8:33:ba
eth3addr=ec:6c:9a:b8:33:ba
eth4addr=ec:6c:9a:b8:33:ba
eth5addr=ec:6c:9a:b8:33:ba
ethact=eth0
ethaddr=ec:6c:9a:b8:33:ba
fdt_high=0x4A400000
fdtcontroladdr=4a9727a0
flash_type=2
ipaddr=192.168.1.254
machid=8010008
netmask=255.255.255.0
serverip=192.168.1.2
soc_version_major=2
soc_version_minor=0
stderr=serial@78B3000
stdin=serial@78B3000
stdout=serial@78B3000

Environment size: 567/262140 bytes
IPQ807x# pci
pci_bus_to_hose() failed
IPQ807x# nand info

Device 0: nand0, sector size 256 KiB
  Page size       4096 b
  OOB size         160 b
  Erase size    262144 b
  subpagesize        0 b
  options     0x       0
  bbt options 0x       0
IPQ807x# mtdparts
mtdids not defined, no default present
IPQ807x# mmcinfo
No MMC device available
IPQ807x# mmc
mmc - MMC sub system

IPQ807x# md
md - memory display

IPQ807x# is_sec_boot_enabled
secure boot fuse is not enabled
IPQ807x# bdinfo
arch_number = 0x08010008
boot_params = 0x40000100
DRAM bank   = 0x00000000
-> start    = 0x40000000
-> size     = 0x40000000
eth0name    = eth0
ethaddr     = ec:6c:9a:b8:33:ba
current eth = eth0
ip_addr     = 192.168.1.254
baudrate    = 115200 bps
TLB addr    = 0x4A9D0000
relocaddr   = 0x4A900000
reloc off   = 0x00000000
irq_sp      = 0x4A77FA90
sp start    = 0x4A77FA80
IPQ807x# base
Base Address: 0x00000000
IPQ807x# md asdf
0000000a:data abort
pc : [<4a9529fc>]          lr : [<4a9529d0>]
reloc pc : [<4a9529fc>]    lr : [<4a9529d0>]
sp : 4a77f8a8  ip : c068ec13     fp : 0000000a
r10: 0000000a  r9 : 4a77fea0     r8 : 00000004
r7 : 00000000  r6 : 00000004     r5 : 00000004  r4 : 00000040
r3 : 0000000a  r2 : 000a0dff     r1 : 4a77f8b8  r0 : 00000009
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...