CS35L41 amplifiers in an ASUS Zenbook on linux

cs35l41_spi.md

Asus Zenbook UX3402 speakers on Linux

Important

THIS IS NOW OBSOLETE WITH KERNEL VERSIONS ≥ 6.7.0

A recent announcement in the kernel mail list by Cirrus developers will solve the problem described here. Therefore, the proposed solutions will be soon obsolete. See this comment (thanks, @flukejones, for the tip).

I got the speakers working on my Asus Zenbook 14 OLED UX3402, the one with Intel CPU and the two CS35L41 audio amplifiers connected over SPI (not the UM3402YA, with AMD and I²C). The amplifiers are supported by the snd_hda_scodec_cs35l41 module in recent kernel versions, but they require some model-specific configuration paramaters, that should be provided by the BIOS, via ACPI. Of course, they are missing. It seems that the Windows drivers have those parameters somehow hardcoded, instead of using ACPI (bad idea, but who am I to criticise). Since Asus has been nasty and refused/was not able to update the BIOS with the missing data, I have patched the ACPI tables myself.

Warning

As stated by Cirrus developers, if you try this there is a non-zero (low, I hope) possibility of blowing your speakers. Take into account that this procedure is not just configuring your box, it is hardware-level hacking with very scarce information about the hardware (thank you, ASUS, and thank you, Cirrus, for not publishing the CS35L41 datasheet and making it only available by request). Additionally, You should know how to work with DSDT or SSDT files (I have a brief guide here) and how to recover from a non booting system. You are on your own. You have been warned.

Note

I have used the patch for some months, and everything seems OK. As you can see, the most recent versions do not require electrical parameters to be specified, just providing the functions of several GPIO pins, that are already present in the original BIOS, and the behavior associated to them. I am almost sure that the patch is totally safe.

My BIOS is the most recent one (version 310). I have added two _DSD objects in the SSDT file (ssdt_csc3551.dsl, or its already assembled version, ssdt_csc3551.aml):

• One inside the SPK1 device, providing the missing "cirrus,dev-index" and other properties, just like the I2C models. You can also provide these properties by patching the kernel module (the linux/sound/pci/hda/cs35l41_hda.c file).

• Another one, after the SPK1 device, with the chip select GPIOs, "cs-gpios", required by the SPI bus (the somehow simpler I²C bus does not use chip select pins, but addresses). Without this _DSD object, only one amplifier can be addressed and activated. In this case, the driver refuses to load even for this single working amplifier.

Obsolete: DSDT patch

Instead of applying a SSDT file, you may patch the full DSDT dissassembled DSDT file (dsdt.dsl). This was my original solution (thanks to @thor2002ro for pointing to the simpler, nicer SSDT solution, see the comment, especially if you use grub). The patch is available for reference, just apply the SSDT file.

Obsolete: internal boost

I keep the old, original patch, that produced AMP short error messages when the volume was high enough, for reference. Please try first the simpler patch with external boost, that seems to work without flaws (thanks to @bdandy, see the comment).

Boot log

Output from journalctl -b -g CSC3551 --output short-monotonic after the old patch:

[5.358062] zenbook kernel: Serial bus multi instantiate pseudo device driver CSC3551:00: Instantiated 2 SPI devices.
[5.643640] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Cirrus Logic CS35L41 (35a40), Revision: B2
[5.680302] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Cirrus Logic CS35L41 (35a40), Revision: B2
[5.996217] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Falling back to default firmware.
[5.996608] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: Firmware version: 3
[5.996611] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot.wmfw: Fri 24 Jun 2022 14:55:56 GMT Daylight Time
[6.069598] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.58.0, 2 algorithms
[6.070173] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: 0: ID cd v29.78.0 XM@94 YM@e
[6.070185] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: 1: ID f20b v0.1.0 XM@17c YM@0
[6.070192] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: e:\workspace\workspace\tibranch_release_playback_6.76_2\ormis\staging\default_tunings\internal\CS35L53\Fixed_Attenuation_Mono_48000_29.78.0\full\Fixed_Attenuation_Mono_48000_29.78.0_full.bin
[6.083485] zenbook kernel: snd_hda_codec_realtek ehdaudio0D0: bound spi1-CSC3551:00-cs35l41-hda.0 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[6.083899] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Falling back to default firmware.
[6.083962] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: Firmware version: 3
[6.083966] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot.wmfw: Fri 24 Jun 2022 14:55:56 GMT Daylight Time
[6.145224] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.58.0, 2 algorithms
[6.145817] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: 0: ID cd v29.78.0 XM@94 YM@e
[6.145828] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: 1: ID f20b v0.1.0 XM@17c YM@0
[6.145834] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: e:\workspace\workspace\tibranch_release_playback_6.76_2\ormis\staging\default_tunings\internal\CS35L53\Fixed_Attenuation_Mono_48000_29.78.0\full\Fixed_Attenuation_Mono_48000_29.78.0_full.bin
[6.161484] zenbook kernel: snd_hda_codec_realtek ehdaudio0D0: bound spi1-CSC3551:00-cs35l41-hda.1 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])

The "Falling back to default firmware" disappears if spk-id-gpios are provided (the block is commented in the patch). As a result, a different firmware is loaded, resulting in very low volume and strong distortion. If the new patch is used, that uses external boost, the sound is correct, and the log is

[0.004000] zenbook kernel: ACPI: Table Upgrade: install [SSDT-CUSTOM- CSC3551]
[0.004000] zenbook kernel: ACPI: SSDT 0x00000000368FD000 0001A0 (v01 CUSTOM CSC3551  00000001 INTL 20200925)
[5.607253] zenbook kernel: Serial bus multi instantiate pseudo device driver CSC3551:00: Instantiated 2 SPI devices.
[5.906936] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Cirrus Logic CS35L41 (35a40), Revision: B2
[5.907354] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Reset line busy, assuming shared reset
[5.938136] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Cirrus Logic CS35L41 (35a40), Revision: B2
[6.239406] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: Firmware version: 3
[6.239415] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431e02.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[6.313109] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[6.313524] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: 0: ID cd v29.63.1 XM@94 YM@e
[6.313530] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: 1: ID f20b v0.1.0 XM@176 YM@0
[6.313535] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: C:\Users\tyang\Desktop\Product Setting\SmartAMP\ASUS\ASUS_Zenbook\UX3402\Tuning Release\220304\ASUS_UX3402_L_tuning_IDYC_ReDc_PICL_RTL_0304.bin
[6.337211] zenbook kernel: snd_hda_codec_realtek ehdaudio0D0: bound spi1-CSC3551:00-cs35l41-hda.0 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[6.337534] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: Firmware version: 3
[6.337540] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431e02.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[6.399070] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[6.399612] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: 0: ID cd v29.63.1 XM@94 YM@e
[6.399623] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: 1: ID f20b v0.1.0 XM@176 YM@0
[6.399629] zenbook kernel: cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: C:\Users\tyang\Desktop\Product Setting\SmartAMP\ASUS\ASUS_Zenbook\UX3402\Tuning Release\220304\ASUS_UX3402_R_tuning_IDYC_ReDc_PICL_RTL_0304.bin
[6.427637] zenbook kernel: snd_hda_codec_realtek ehdaudio0D0: bound spi1-CSC3551:00-cs35l41-hda.1 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])

dsdt.dsl-old.patch

--- dsdt.dsl.old	2023-03-26 01:06:48.845795666 +0100
+++ dsdt.dsl	2023-03-26 12:00:45.643851841 +0200
@@ -18,7 +18,7 @@
  *     Compiler ID      "INTL"
  *     Compiler Version 0x20200717 (538969879)
  */
-DefinitionBlock ("", "DSDT", 2, "_ASUS_", "Notebook", 0x01072009)
+DefinitionBlock ("", "DSDT", 2, "_ASUS_", "Notebook", 0x0107200A)
 {
     /*
      * iASL Warning: There were 233 external control methods found during
@@ -90642,7 +90642,48 @@
             Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
             {
             }
+
+            Name (_DSD, Package ()   // _DSD: Device-Specific Data
+            {
+                ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), 
+                Package ()
+                {
+                    Package () { "cirrus,dev-index", Package () { Zero, One }},
+                    Package () { "reset-gpios", Package () {
+                       SPK1, One, Zero, Zero,
+                       SPK1, One, Zero, Zero,
+                    } },
+                    // Package () { "spk-id-gpios", Package () {
+                    //    SPK1, 0x02, Zero, Zero,
+                    //    SPK1, 0x02, Zero, Zero,
+                    // } },
+                    Package () { "cirrus,speaker-position",     Package () { Zero, One } },
+                    Package () { "cirrus,gpio1-func",           Package () { Zero, Zero } },
+                    Package () { "cirrus,gpio2-func",           Package () { 0x02, 0x02 } },
+                    // boost-type: 0 internal, 1 external
+                    Package () { "cirrus,boost-type",           Package () { Zero, Zero } },
+                    // boost-peak-milliamp: 1600 to 4500, increments of 50 mA
+                    Package () { "cirrus,boost-peak-milliamp",  Package () { 4500, 4500 } },
+                    // boost-ind-nanohenry: 1000 | 1200 | 1500 | 2200 nH
+                    Package () { "cirrus,boost-ind-nanohenry",  Package () { 1000, 1000 } },
+                    // boost-cap-microfarad: rounded to the nearest integer
+                    Package () { "cirrus,boost-cap-microfarad", Package () { 24, 24 } },
+                },
+            })
         }
+
+        Name (_DSD, Package ()
+        {
+            ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), 
+            Package ()
+            {
+                Package () { "cs-gpios", Package () { 
+                    Zero,                    // Native CS
+                    SPK1, Zero, Zero, Zero   // GPIO CS
+                } }
+            }
+        })
+
     }
 
     Scope (_SB.PC00.LPCB)

dsdt.dsl.patch

--- dsdt.dsl.old	2023-03-26 01:06:48.845795666 +0100
+++ dsdt.dsl	2023-03-26 12:00:45.643851841 +0200
@@ -18,7 +18,7 @@
  *     Compiler ID      "INTL"
  *     Compiler Version 0x20200717 (538969879)
  */
-DefinitionBlock ("", "DSDT", 2, "_ASUS_", "Notebook", 0x01072009)
+DefinitionBlock ("", "DSDT", 2, "_ASUS_", "Notebook", 0x0107200A)
 {
     /*
      * iASL Warning: There were 233 external control methods found during
@@ -90642,7 +90642,43 @@
             Method (_DIS, 0, NotSerialized)  // _DIS: Disable Device
             {
             }
+
+            Name (_DSD, Package ()   // _DSD: Device-Specific Data
+            {
+                ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), 
+                Package ()
+                {
+                    Package () { "cirrus,dev-index", Package () { Zero, One }},
+                    Package () { "reset-gpios", Package () {
+                       SPK1, One, Zero, Zero,
+                       SPK1, One, Zero, Zero,
+                    } },
+                    Package () { "spk-id-gpios", Package () {
+                       SPK1, 0x02, Zero, Zero,
+                       SPK1, 0x02, Zero, Zero,
+                    } },
+                    Package () { "cirrus,speaker-position",     Package () { Zero, One } },
+                    // gpioX-func: 0 not used, 1 VPSK_SWITCH, 2: INTERRUPT, 3: SYNC
+                    Package () { "cirrus,gpio1-func",           Package () { One, One } },
+                    Package () { "cirrus,gpio2-func",           Package () { 0x02, 0x02 } },
+                    // boost-type: 0 internal, 1 external
+                    Package () { "cirrus,boost-type",           Package () { One, One } },
+                },
+            })
         }
+
+        Name (_DSD, Package ()
+        {
+            ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), 
+            Package ()
+            {
+                Package () { "cs-gpios", Package () { 
+                    Zero,                    // Native CS
+                    SPK1, Zero, Zero, Zero   // GPIO CS
+                } }
+            }
+        })
+
     }
 
     Scope (_SB.PC00.LPCB)

ssdt_csc3551.aml

ssdt_csc3551.dsl

DefinitionBlock ("", "SSDT", 1, "CUSTOM", "CSC3551", 0x00000001)
{
    External (_SB_.PC00.SPI0, DeviceObj)
    External (_SB_.PC00.SPI0.SPK1, DeviceObj)

    Scope (_SB.PC00.SPI0.SPK1)
    {
        Name (_DSD, Package ()
        {
            ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
            Package ()
            {
                Package () { "cirrus,dev-index", Package () { Zero, One }},
                Package () { "reset-gpios", Package () {
                    SPK1, One, Zero, Zero,
                    SPK1, One, Zero, Zero
                } },
                Package () { "spk-id-gpios", Package () {
                    SPK1, 0x02, Zero, Zero,
                    SPK1, 0x02, Zero, Zero
                } },
                Package () { "cirrus,speaker-position", Package () { Zero, One } },
                // gpioX-func: 0 not used, 1 VPSK_SWITCH, 2: INTERRUPT, 3: SYNC
                Package () { "cirrus,gpio1-func", Package () { One, One } },
                Package () { "cirrus,gpio2-func", Package () { 0x02, 0x02 } },
                // boost-type: 0 internal, 1 external
                Package () { "cirrus,boost-type", Package () { One, One } }
            }
        })
    }

    Scope (_SB.PC00.SPI0)
    {
        Name (_DSD, Package ()
        {
            ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
            Package ()
            {
                Package () { "cs-gpios", Package () { 
                    Zero,                    // Native CS
                    SPK1, Zero, Zero, Zero   // GPIO CS
                } }
            }
        })
    }
}

@159356-1702-Extramural your laptop is patched in upstream kernel (my patch was accepted last week). This should be in next 6.10 version, and in 6.11-RC3. You will need latest firmware.

I am getting bad sound quality on latest kernel unless the volume is low(<50%), I am runing mainline kernel.

the volume at >50% feels ok, but it starts getting a bit of crackling and bass which makes human voice annoying in audio calls
(or maybe I am just imagining it and that's just the way this hardware is supposed to work, I wiped Windows so I can't compare)

My active quirk in mainline is

SND_PCI_QUIRK(0x1043, 0x1c03, "ASUS UM3406HA", ALC287_FIXUP_CS35L41_I2C_2)

Is there something else that can be done or was done to similar machines?

[121739.231216] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431c03.wmfw: format 3 timestamp 0x64269d09
[121739.231230] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431c03.wmfw: Fri 31 Mar 2023 10:42:49 W. Europe Daylight Time
[121739.549909] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.65.0, 2 algorithms
[121739.584748] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431c03-spkid1-r0.bin: v0.65.0
[121739.584758] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: C:\Users\tyang\Desktop\ProductSetting\UX3406\Tuning\01192024\Tuning\UM3406HA_Xmax0p6Redc6p7_Rch_Tuni
[121740.087612] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.65.0, 2 algorithms
[121740.089252] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-10431c03-spkid1-l0.bin: v0.65.0
[121740.089261] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: C:\Users\tyang\Desktop\ProductSetting\UX3406\Tuning\01192024\Tuning\UM3406HA_Xmax0p6Redc6p7_Lch_Tuni
[121740.171526] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Calibration applied: R0=9172
[121740.174720] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Calibration applied: R0=9117
[121740.194842] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.1: Firmware Loaded - Type: spk-prot, Gain: 19
[121740.196769] cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: Firmware Loaded - Type: spk-prot, Gain: 19

also, looks like I am already running latest firmware on Fedora which is https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=fe07c4bdd435c623fdf215bb0d94f9e6f838e164

the commit you were referring to is probably torvalds/linux@e6e1802

would ALC285_FIXUP_ASUS_SPI_REAR_SPEAKERS be a better quirk for my hardware too by any chance?

Hi guys!

I tried to read the whole thread but sorry if missed out important info.

I have an UX3405MA, installed the following patch, but the audio is still really quiet.

https://github.com/smallcms/asus_zenbook_ux3405ma

Is there anything that can be done extra to fix this issue? I'm dual booting windows, on Windows it works miles better.

I'm on kernel 6.10.7-200.fc40.x86_64

@danee940 , you'll get answers on this thread for the UX3405: smallcms/asus_zenbook_ux3405ma#7

tldr; wait for the Linux kernel 6.11 to come out, or build the kernel with the patch mentioned there.

Thank you @paul-ri !

I think I'll wait for the next kernel. But hope is not lost, that's great!

Trying to patch an Asus ExpertBook P5405 using SSDT table upgrades with no luck.

journalctl -b -1 | grep -i csc3551

ACPI: SSDT ACPI table found in initrd [kernel/firmware/acpi/ssdt_csc3551.aml][0x1a0]
ACPI: Table Upgrade: install [SSDT-CUSTOM- CSC3551]
ACPI: SSDT 0x0000000058217000 0001A0 (v01 CUSTOM CSC3551  00000001 INTL 20230628)
cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: Cirrus Logic CS35L41 (35a40), Revision: B2
cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Reset line busy, assuming shared reset
cs35l41-hda spi1-CSC3551:00-cs35l41-hda.1: Cirrus Logic CS35L41 (35a40), Revision: B2
Serial bus multi instantiate pseudo device driver CSC3551:00: Instantiated 2 SPI devices.

It looks like it has two amps with a shared reset gpio. Not entirely sure what to do as my knowledge of iASL / ACPI is very limited.

My SSDT patch is below:

DefinitionBlock ("", "SSDT", 1, "CUSTOM", "CSC3551", 0x00000001)
{
    External (_SB_.PC00.SPI1, DeviceObj)
    External (_SB_.PC00.SPI1.SPK1, DeviceObj)

    Scope (_SB.PC00.SPI1.SPK1)
    {
        Name (_DSD, Package ()
        {
            ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
            Package ()
            {
                Package () { "cirrus,dev-index", Package () { Zero, One }},
                Package () { "reset-gpios", Package () {
                    SPK1, One, Zero, Zero,
                    SPK1, One, Zero, Zero
                } },
                Package () { "spk-id-gpios", Package () {
                    SPK1, 0x02, Zero, Zero,
                    SPK1, 0x02, Zero, Zero
                } },
                Package () { "cirrus,speaker-position", Package () { Zero, One } },
                // gpioX-func: 0 not used, 1 VPSK_SWITCH, 2: INTERRUPT, 3: SYNC
                Package () { "cirrus,gpio1-func", Package () { Zero, Zero } },
                Package () { "cirrus,gpio2-func", Package () { 0x02, 0x02 } },
                // boost-type: 0 internal, 1 external
                Package () { "cirrus,boost-type", Package () { Zero, Zero } }
            }
        })
    }

    Scope (_SB.PC00.SPI1)
    {
        Name (_DSD, Package ()
        {
            ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
            Package ()
            {
                Package () { "cs-gpios", Package () {
                    Zero,                    // Native CS
                    SPK1, Zero, Zero, Zero   // GPIO CS
                } }
            }
        })
    }
}

I tried changing reset-gpios to Zero, Zero Zero, still nothing.

If anyone has any ideas i would appreciate it. This is a very new model, not sure when it will be supported if ever.