VoCore kernel log

kernel.log

[    0.000000] Linux version 3.14.18 ([email protected]) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42586) ) #15 Wed Sep 24 11:18:53 CST 2014
[    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
[    0.000000] MIPS: machine is VoCore
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 802b6400, node_mem_map 81005100
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=0000965a
[    0.000000] Readback ErrCtl register=0000965a
[    0.000000] Memory: 29212K/32768K available (2284K kernel code, 119K rwdata, 456K rodata, 140K init, 180K bss, 3556K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 360MHz
[    0.000000] systick: running - mult: 214748, shift: 32
[    0.000000] genirq: Flags mismatch irq 7. 00014600 (timer) vs. 00014600 (systick)
[    0.010000] Calibrating delay loop... 479.23 BogoMIPS (lpj=2396160)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090000] pinctrl core: initialized pinctrl subsystem
[    0.090000] NET: Registered protocol family 16
[    0.100000] rt2880-pinmux pinctrl.1: try to register 28 pins ...
[    0.100000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[    0.100000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[    0.100000] pinctrl core: add 3 pinmux maps
[    0.100000] rt2880-pinmux pinctrl.1: found group selector 4 for jtag
[    0.100000] rt2880-pinmux pinctrl.1: found group selector 2 for uartf
[    0.100000] rt2880-pinmux pinctrl.1: found group selector 5 for led
[    0.100000] rt2880-pinmux pinctrl.1: request pin 17 (io17) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 18 (io18) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 19 (io19) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 20 (io20) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 21 (io21) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 7 (io7) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 8 (io8) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 9 (io9) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 10 (io10) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 11 (io11) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 12 (io12) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 13 (io13) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 14 (io14) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 22 (io22) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 23 (io23) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 24 (io24) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 25 (io25) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: request pin 26 (io26) for pinctrl.1
[    0.100000] rt2880-pinmux pinctrl.1: failed to lookup the sleep state
[    0.120000] bio: create slab <bio-0> at 0
[    0.120000] rt2880_gpio 10000600.gpio: registering 22 gpios
[    0.130000] rt2880_gpio 10000600.gpio: registering 22 irq handlers
[    0.130000] rt2880_gpio 10000660.gpio: registering 6 gpios
[    0.140000] rt2880_gpio 10000660.gpio: registering 6 irq handlers
[    0.150000] Switched to clocksource systick
[    0.150000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.190000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.190000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.220000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    0.250000] rt-timer 10000100.timer: maximum frequency is 7324Hz
[    0.270000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[    0.270000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.330000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.330000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.360000] msgmni has been set to 57
[    0.360000] io scheduler noop registered
[    0.380000] io scheduler deadline registered (default)
[    0.380000] rt2880-pinmux pinctrl.1: request pin 0 (io0) for pio:0
[    0.380000] rt2880-pinmux pinctrl.1: request pin 7 (io7) for pio:7
[    0.380000] rt2880-pinmux pinctrl.1: request pin 8 (io8) for pio:8
[    0.380000] rt2880-pinmux pinctrl.1: request pin 9 (io9) for pio:9
[    0.380000] rt2880-pinmux pinctrl.1: request pin 12 (io12) for pio:12
[    0.390000] rt2880-pinmux pinctrl.1: request pin 13 (io13) for pio:13
[    0.390000] rt2880-pinmux pinctrl.1: request pin 14 (io14) for pio:14
[    0.390000] rt2880-pinmux pinctrl.1: request pin 17 (io17) for pio:17
[    0.390000] rt2880-pinmux pinctrl.1: request pin 18 (io18) for pio:18
[    0.400000] rt2880-pinmux pinctrl.1: request pin 19 (io19) for pio:19
[    0.400000] rt2880-pinmux pinctrl.1: request pin 20 (io20) for pio:20
[    0.400000] rt2880-pinmux pinctrl.1: request pin 21 (io21) for pio:21
[    0.400000] rt2880-pinmux pinctrl.1: request pin 22 (io22) for pio:22
[    0.400000] rt2880-pinmux pinctrl.1: request pin 23 (io23) for pio:23
[    0.400000] rt2880-pinmux pinctrl.1: request pin 24 (io24) for pio:24
[    0.400000] rt2880-pinmux pinctrl.1: request pin 25 (io25) for pio:25
[    0.400000] rt2880-pinmux pinctrl.1: request pin 26 (io26) for pio:26
[    0.400000] gpio-export gpio-export.4: 17 gpio(s) exported
[    0.420000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.430000] serial8250 serial8250: no of_node; not parsing pinctrl DT
[    0.430000] pinctrl core: add 1 pinmux maps
[    0.430000] rt2880-pinmux pinctrl.1: found group selector 3 for uartlite
[    0.430000] rt2880-pinmux pinctrl.1: request pin 15 (io15) for 10000c00.uartlite
[    0.430000] rt2880-pinmux pinctrl.1: request pin 16 (io16) for 10000c00.uartlite
[    0.430000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A
[    0.450000] console [ttyS0] enabled
[    0.470000] bootconsole [early0] disabled
[    0.490000] pinctrl core: add 1 pinmux maps
[    0.490000] pinctrl core: add 1 pinmux maps
[    0.490000] rt2880-pinmux pinctrl.1: found group selector 1 for spi
[    0.490000] rt2880-pinmux pinctrl.1: found group selector 6 for spi_cs1
[    0.490000] rt2880-pinmux pinctrl.1: request pin 3 (io3) for 10000b00.spi
[    0.490000] rt2880-pinmux pinctrl.1: request pin 4 (io4) for 10000b00.spi
[    0.490000] rt2880-pinmux pinctrl.1: request pin 5 (io5) for 10000b00.spi
[    0.490000] rt2880-pinmux pinctrl.1: request pin 6 (io6) for 10000b00.spi
[    0.490000] rt2880-pinmux pinctrl.1: request pin 27 (io27) for 10000b00.spi
[    0.490000] m25p80 spi32766.0: w25q128 (16384 Kbytes)
[    0.510000] m25p80 spi32766.0: unique id: D262481697441623
[    0.510000] 4 ofpart partitions found on MTD device spi32766.0
[    0.530000] Creating 4 MTD partitions on "spi32766.0":
[    0.530000] 0x000000000000-0x000000030000 : "uboot"
[    0.550000] 0x000000030000-0x000000040000 : "uboot-env"
[    0.570000] 0x000000040000-0x000000050000 : "factory"
[    0.570000] 0x000000050000-0x000001000000 : "firmware"
[    0.600000] 0x00000015059f-0x000001000000 : "rootfs"
[    0.600000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.630000] mtd: device 4 (rootfs) set to be root filesystem
[    0.650000] mtd: partition "rootfs_data" created automatically, ofs=0x3d0000, len=0xc30000
[    0.670000] 0x0000003d0000-0x000001000000 : "rootfs_data"
[    0.690000] eth0: done loading
[    0.690000] rt3xxx-usbphy usbphy.3: loaded
[    0.710000] rt2880_wdt 10000120.watchdog: Initialized
[    0.710000] TCP: cubic registered
[    0.730000] NET: Registered protocol family 17
[    0.730000] 8021q: 802.1Q VLAN Support v1.8
[    0.760000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    0.780000] Freeing unused kernel memory: 140K (802cd000 - 802f0000)
[    6.610000] usbcore: registered new interface driver usbfs
[    6.630000] usbcore: registered new interface driver hub
[    6.650000] usbcore: registered new device driver usb
[    6.670000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.670000] ehci-platform: EHCI generic platform driver
[    7.090000] rt3xxx-usbphy usbphy.3: remote usb device wakeup disabled
[    7.110000] rt3xxx-usbphy usbphy.3: UTMI 16bit 30MHz
[    7.110000] ehci-platform 101c0000.ehci: EHCI Host Controller
[    7.130000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    7.130000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    7.170000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    7.190000] usb usb1: no of_node; not parsing pinctrl DT
[    7.190000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
[    7.190000] hub 1-0:1.0: USB hub found
[    7.190000] hub 1-0:1.0: 1 port detected
[    7.210000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.230000] ohci-platform: OHCI generic platform driver
[    7.230000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    7.250000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[    7.270000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    7.330000] usb usb2: no of_node; not parsing pinctrl DT
[    7.330000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
[    7.330000] hub 2-0:1.0: USB hub found
[    7.350000] hub 2-0:1.0: 1 port detected
[    7.350000] rt2880-pinmux pinctrl.1: request pin 10 (io10) for pio:10
[    7.350000] rt2880-pinmux pinctrl.1: request pin 11 (io11) for pio:11
[    8.460000] rt305x-esw 10110000.esw: link changed 0x00
[    8.680000] random: mktemp urandom read with 79 bits of entropy available
[   12.520000] jffs2: notice: (315) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 7 of xref (0 dead, 0 orphan) found.
[   15.110000] NET: Registered protocol family 10
[   15.140000] tun: Universal TUN/TAP device driver, 1.6
[   15.140000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[   15.170000] nf_conntrack version 0.5.0 (458 buckets, 1832 max)
[   15.200000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   15.230000] pinctrl core: add 1 pinmux maps
[   15.230000] rt2880-pinmux pinctrl.1: found group selector 0 for i2c
[   15.230000] rt2880-pinmux pinctrl.1: request pin 1 (io1) for 10000900.i2c
[   15.230000] rt2880-pinmux pinctrl.1: request pin 2 (io2) for 10000900.i2c
[   15.230000] i2c-ralink 10000900.i2c: loaded
[   15.230000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[   15.230000] Backport generated by backports.git backports-20140320-37-g5c33da0
[   15.230000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.230000] xt_time: kernel timezone is -0000
[   15.230000] cfg80211: Calling CRDA to update world regulatory domain
[   15.230000] cfg80211: World regulatory domain updated:
[   15.230000] cfg80211:  DFS Master region: unset
[   15.230000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   15.230000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.230000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.230000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   15.230000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[   15.560000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   15.570000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   15.590000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   15.610000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   15.710000] PPP generic driver version 2.4.2
[   15.710000] NET: Registered protocol family 24
[   15.780000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected
[   15.800000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected
[   15.800000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   24.220000] random: nonblocking pool is initialized
[   28.340000] device eth0.1 entered promiscuous mode
[   28.340000] device eth0 entered promiscuous mode
[   28.340000] br-lan: port 1(eth0.1) entered forwarding state
[   28.340000] br-lan: port 1(eth0.1) entered forwarding state
[   30.340000] br-lan: port 1(eth0.1) entered forwarding state
[   31.460000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   31.470000] device wlan0 entered promiscuous mode
[   31.510000] br-lan: port 2(wlan0) entered forwarding state
[   31.510000] br-lan: port 2(wlan0) entered forwarding state
[   31.530000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   33.510000] br-lan: port 2(wlan0) entered forwarding state