OpenVPN configuration for /etc/openvpn/server.conf

server.conf

local 192.168.2.0 # SWAP THIS NUMBER WITH YOUR RASPBERRY PI IP ADDRESS
dev tun 
proto udp #Some people prefer to use tcp. Don't change it if you don't know.
port 1194 
ca /etc/openvpn/easy-rsa/keys/ca.crt 
cert /etc/openvpn/easy-rsa/keys/Server.crt # SWAP WITH YOUR CRT NAME
key /etc/openvpn/easy-rsa/keys/Server.key # SWAP WITH YOUR KEY NAME
dh /etc/openvpn/easy-rsa/keys/dh1024.pem # If you changed to 2048, change that here!
server 10.8.0.0 255.255.255.0 
# server and remote endpoints 
ifconfig 10.8.0.1 10.8.0.2 
# Add route to Client routing table for the OpenVPN Server 
push "route 10.8.0.1 255.255.255.255" 
# Add route to Client routing table for the OpenVPN Subnet 
push "route 10.8.0.0 255.255.255.0" 
# your local subnet 
push "route 192.168.2.0 255.255.255.0" # SWAP THE IP NUMBER WITH YOUR RASPBERRY PI IP ADDRESS
# Set primary domain name server address to the SOHO Router 
# If your router does not do DNS, you can use Google DNS 8.8.8.8 
push "dhcp-option DNS 192.168.2.1" # This should already match your router address and not need to be changed.
# Override the Client default gateway by using 0.0.0.0/1 and 
# 128.0.0.0/1 rather than 0.0.0.0/0. This has the benefit of 
# overriding but not wiping out the original default gateway. 
push "redirect-gateway def1" 
client-to-client 
duplicate-cn 
keepalive 10 120 
tls-auth /etc/openvpn/easy-rsa/keys/ta.key 0 
cipher AES-128-CBC 
comp-lzo 
user nobody 
group nogroup 
persist-key 
persist-tun 
status /var/log/openvpn-status.log 20 
log /var/log/openvpn.log 
verb 1

If changes are made to this after finishing the steps in the guide do we need to remake any keys or redo any steps to the whole process?

push "dhcp-option DNS 192.168.1.1" # This should already match your router address and not need to be changed.

I had this line set up as my public IP address not my router IP.

Noob here. Can someone please help me? What's my CRT and KEY name? How do I find out?

This is what I get:
Please enter an existing Client Name:
Client1
Client’s cert found: Client1
Client’s Private Key found: Client1.3des.key
CA public Key found: ca.crt
tls-auth Private Key found: ta.key
./MakeOVPN.sh: line 46: Default.txt: command not found
Done! Client1.ovpn Successfully Created.
./MakeOVPN.sh: line 72: No: command not found

I am facing problem while connecting SIP Registrations
I can able to connect Client with OPENVPN Server, Please tell me the IP routing configuration:

my current IP route is:
10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1
192.168.101.0/24 dev em1 proto kernel scope link src 192.168.101.2
64.xxx.xx.xx/24 dev em1 proto kernel scope link src 64.xxx.xx.xx
10.8.0.0/24 via 10.8.0.2 dev tun0
169.254.0.0/16 dev em1 scope link metric 1002
default via 192.168.101.1 dev em1 src 192.168.101.2
default via 64.56.73.1 dev em1

Changed my Local Subnet to the pi itself since I am also runnning Pi-hole.
Able to get to yahoo.com and google.com and some other sites but others doesn't load at all, when connected, am i missing somthing?

Found out im using my ipv6 address and not my ipv4 address when checking out my ip, so i'm assuming its using the ipv6 of the sites that i can connect to.

How can you update the server.conf file? Everytime i try to update it it throws a permissions error. Same error happens on WinSCP and Cyberduck.

cert /etc/openvpn/easy-rsa/keys/Server.crt # SWAP WITH YOUR CRT NAME
key /etc/openvpn/easy-rsa/keys/Server.key # SWAP WITH YOUR KEY NAME

can someone explain what this means ? what is CRT and Key name or do i just leave it as so?

The following script in the repository enabled duplicate-cn by default. You don't want to change the config file.
https://github.com/gayankuruppu/openvpn-install-for-multiple-users