Frank Lemanschik lemanschik

CogVideoX Official

Text/Video-to-Video 2B: https://huggingface.co/THUDM/CogVideoX-2b
Text/Video-to-Video 5B: https://huggingface.co/THUDM/CogVideoX-5b
Image-to-Video 5B: https://huggingface.co/THUDM/CogVideoX-5b-I2V
Original Repository: https://github.com/THUDM/CogVideo
Diffusers documentation: https://huggingface.co/docs/diffusers/en/api/pipelines/cogvideox
Diffusers-TorchAO quantization benchmarks: https://github.com/sayakpaul/diffusers-torchao/
Diffusers-Quanto example: https://gist.github.com/a-r-r-o-w/31be62828b00a9292821b85c1017effa
HF CogVideoX Space: https://huggingface.co/spaces/THUDM/CogVideoX-5B-Space

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

Encrypted Btrfs storage setup and maintenance guide

Initial setup with LUKS/dm-crypt

This exemplary initial setup uses two devices /dev/sdb and /dev/sdc but can be applied to any amount of devices by following the steps with additional devices.

Create keyfile:

dd bs=64 count=1 if=/dev/urandom of=/etc/cryptkey iflag=fullblock
chmod 600 /etc/cryptkey

	Install WireGuard via whatever package manager you use. For me, I use apt.

	$ sudo add-apt-repository ppa:wireguard/wireguard
	$ sudo apt-get update
	$ sudo apt-get install wireguard

	MacOS
	$ brew install wireguard-tools

	Generate key your key pairs. The key pairs are just that, key pairs. They can be