ER-12 u-boot

uboot.log

SPI stage 1 bootloader
SPI ID: c2:20:17:c2:20
header found at offset 0x2000
Image 1.2: address: 0xffffffffc0000000, header length: 192, data length: 359416
Validating data...
Starting next bootloader at 0xffffffff81000000
Board type: UBNT_E300

U-Boot 2013.07 (UBNT Build Version: e302_001_3f6cf) (Aug 27 2018 - 07:21:15)

Octeon unique ID: 01400051841df31e0497
N0.LMC0 Configuration Completed: 1024 MB
Warning: Board descriptor tuple not found in eeprom, using defaults
Core clock: 1000 MHz, IO clock: 400 MHz, DDR clock: 533 MHz (1066 Mhz DDR)
Start hw_watchdog_start!
Stop hw_watchdog_start!
Base DRAM address used by u-boot: 0x4fc00000, size: 0x400000
DRAM: 1 GiB
Clearing DRAM...... done

SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB
Found valid SPI bootloader at offset: 0x5c000, size: 1438728 bytes
Found valid SPI bootloader at offset: 0x200000, size: 1438728 bytes
Loading bootloader from SPI offset 0x200000, size: 1438728 bytes


U-Boot 2013.07 (UBNT Build Version: e302_003_6be37) (Jun 05 2019 - 09:02:51)

Octeon unique ID: 01400051841df31e0497
Using DRAM size from environment: 1024 MBytes
Core clock: 1000 MHz, IO clock: 400 MHz, DDR clock: 533 MHz (1066 Mhz DDR)
Base DRAM address used by u-boot: 0x4f000000, size: 0x1000000
DRAM: 1 GiB
Clearing DRAM...... done
SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB
SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB



UBNT_E300 r1:2, r2:13, serial #: 18E8294E206C
MPR 13-02601-13
Loading bootloader from SPI offset 0x200000, size: 1438728 bytes


U-Boot 2013.07 (UBNT Build Version: e302_003_6be37) (Jun 05 2019 - 09:02:51)

Octeon unique ID: 01400051841df31e0497
Using DRAM size from environment: 1024 MBytes
Core clock: 1000 MHz, IO clock: 400 MHz, DDR clock: 533 MHz (1066 Mhz DDR)
Base DRAM address used by u-boot: 0x4f000000, size: 0x1000000
DRAM: 1 GiB
Clearing DRAM...... done
SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB
SF: Detected MX25L6405D with page size 256 Bytes, erase size 4 KiB, total 8 MiB



UBNT_E300 r1:2, r2:13, serial #: 18E8294E206C
MPR 13-02601-13
Flash boot bus region not enabled, skipping NOR flash config
DLM0: QSGMII ports selected
DLM1: mini-PCIe slots selected
DLM2: mini-PCIe slots selected
SPI: SPI NOR enabled
MMC:   Octeon MMC/SD0: 0
PCIe: Link timeout on port 0, probably the slot is empty
PCIe: Port 1 not in PCIe mode, skipping
PCIe: Port 2 not in PCIe mode, skipping
PCI console init succeeded, 1 consoles, 1024 bytes each
Net:   QCA8511 Init done....
mdio_register: non unique device name 'mdio-octeon0'
mdio_register: non unique device name 'mdio-octeon1'
octeth0, octeth1 [PRIME], octeth2, octeth3, octeth4, octeth5, octeth6, octeth7
Node 0 Interface 0 has 4 ports (QSGMII)
Node 0 Interface 1 has 4 ports (QSGMII)
Node 0 Interface 2 has 4 ports (NPI)
Node 0 Interface 3 has 4 ports (LOOP)
Node 0 Interface 4 has 1 ports (AGL)
Type the command 'usb start' to scan for USB storage devices.

Hit any key to stop autoboot:  0 
Octeon ubnt_e300(ram)# mdio list        
mdio-octeon0:
4 - Vitesse VSC8504 <--> octeth0
5 - Vitesse VSC8504 <--> octeth1
6 - Vitesse VSC8504 <--> octeth2
7 - Vitesse VSC8504 <--> octeth3
mdio-octeon1:
Octeon ubnt_e300(ram)# mii device
MII devices: 'mdio-octeon0' 'mdio-octeon1' 
Current device: 'mdio-octeon0'
Octeon ubnt_e300(ram)#