lenigma1

Installing Klipper on TronXY X5SA

** obligatory "your warranty in now void" disclaimer ** THIS GUIDE IS FOR CHITU V6 BOARDS ONLY

So, you've decided to upgrade you printer software-wise. You are in for a ride!

What can you expect

You'll get Klipper experience. That includes speeds up to 300 mm/s (I've tested infill at 180, and it was pretty much flawless), proper linear advance, low vibration on high accelerations without relying on approximations like S-Curve, no lags on dense GCode files — it's nothing like Marlin or the stock firmware.

	sudo apt update && sudo apt upgrade -y
	wget https://github.com/awawa-dev/HyperHDR/releases/download/v17.0.0.0/HyperHDR-17.0.0.0-Linux-`uname -m`.deb
	sudo apt install ./HyperHDR-17.0.0.0-Linux-`uname -m`.deb
	sudo sed -i '/^User/d' /etc/systemd/system/hyperhdr\@.service
	sudo systemctl daemon-reload
	sudo service hyperhdr@pi restart
	sudo service hyperhdr@pi status

	sudo apt update && sudo apt upgrade -y
	wget https://github.com/awawa-dev/HyperHDR/releases/download/v16.0.0.1/HyperHDR-16.0.0.1-Linux-`uname -m`.deb
	sudo apt install ./HyperHDR-16.0.0.1-Linux-`uname -m`.deb
	sudo sed -i '/^User/d' /etc/systemd/system/hyperhdr\@.service
	sudo systemctl daemon-reload
	sudo service hyperhdr@pi restart
	sudo service hyperhdr@pi status