** obligatory "your warranty in now void" disclaimer **
THIS GUIDE IS FOR CHITU V6 BOARDS ONLY
So, you've decided to upgrade you printer software-wise. You are in for a ride!
You'll get Klipper experience. That includes speeds up to 300 mm/s (I've tested infill at 180, and it was pretty much flawless), proper linear advance, low vibration on high accelerations without relying on approximations like S-Curve, no lags on dense GCode files — it's nothing like Marlin or the stock firmware.
| sudo apt update && sudo apt upgrade -y | |
| wget https://github.com/awawa-dev/HyperHDR/releases/download/v16.0.0.1/HyperHDR-16.0.0.1-Linux-`uname -m`.deb | |
| sudo apt install ./HyperHDR-16.0.0.1-Linux-`uname -m`.deb | |
| sudo sed -i '/^User/d' /etc/systemd/system/hyperhdr\@.service | |
| sudo systemctl daemon-reload | |
| sudo service hyperhdr@pi restart | |
| sudo service hyperhdr@pi status |
| sudo apt update && sudo apt upgrade -y | |
| wget https://github.com/awawa-dev/HyperHDR/releases/download/v17.0.0.0/HyperHDR-17.0.0.0-Linux-`uname -m`.deb | |
| sudo apt install ./HyperHDR-17.0.0.0-Linux-`uname -m`.deb | |
| sudo sed -i '/^User/d' /etc/systemd/system/hyperhdr\@.service | |
| sudo systemctl daemon-reload | |
| sudo service hyperhdr@pi restart | |
| sudo service hyperhdr@pi status |
