aws-lambda-poppler-layer 23.05.0 version

compiler.Dockerfile

FROM amazonlinux:2018.03

SHELL ["/bin/bash", "-c"]

ENV BUILD_DIR="/tmp/build"
ENV INSTALL_DIR="/opt"

# Lock To Proper Release

RUN sed -i 's/releasever=latest/releaserver=2018.03/' /etc/yum.conf

# Create All The Necessary Build Directories

RUN mkdir -p ${BUILD_DIR}  \
    ${INSTALL_DIR}/bin \
    ${INSTALL_DIR}/doc \
    ${INSTALL_DIR}/include \
    ${INSTALL_DIR}/lib \
    ${INSTALL_DIR}/lib64 \
    ${INSTALL_DIR}/libexec \
    ${INSTALL_DIR}/sbin \
    ${INSTALL_DIR}/share

# Install Development Tools

WORKDIR /tmp

RUN set -xe \
    && yum makecache \
    && yum groupinstall -y "Development Tools"  --setopt=group_package_types=mandatory,default \
    && yum install -y libuuid-devel openssl-devel gcc72 gcc72-c++

# Install CMake

RUN  set -xe \
    && mkdir -p /tmp/cmake \
    && cd /tmp/cmake \
    && curl -Ls  https://github.com/Kitware/CMake/releases/download/v3.26.4/cmake-3.26.4.tar.gz \
    | tar xzC /tmp/cmake --strip-components=1 \
    && sed -i '/"lib64"/s/64//' Modules/GNUInstallDirs.cmake \
    && ./bootstrap \
    --prefix=/usr/local \
    --no-system-jsoncpp \
    --no-system-librhash \
    --no-system-curl \
    && make \
    && make install

# Install NASM

RUN  set -xe \
    && mkdir -p /tmp/nasm \
    && cd /tmp/nasm \
    && curl -Ls  http://www.nasm.us/pub/nasm/releasebuilds/2.14.02/nasm-2.14.02.tar.xz \
    | tar xJvC /tmp/nasm --strip-components=1 \
    && ./configure --prefix=/usr/local \
    && make \
    && make install

# Configure Default Compiler Variables

ENV PKG_CONFIG_PATH="${INSTALL_DIR}/lib64/pkgconfig:${INSTALL_DIR}/lib/pkgconfig" \
    PKG_CONFIG="/usr/bin/pkg-config" \
    PATH="${INSTALL_DIR}/bin:${PATH}"

ENV LD_LIBRARY_PATH="${INSTALL_DIR}/lib64:${INSTALL_DIR}/lib"

# Build LibXML2 (https://github.com/GNOME/libxml2/releases)

ENV VERSION_XML2=2.9.10
ENV XML2_BUILD_DIR=${BUILD_DIR}/xml2

RUN set -xe; \
    mkdir -p ${XML2_BUILD_DIR}; \
    curl -Ls http://xmlsoft.org/sources/libxml2-${VERSION_XML2}.tar.gz \
    | tar xzC ${XML2_BUILD_DIR} --strip-components=1

WORKDIR  ${XML2_BUILD_DIR}/

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib" \
    ./configure \
    --prefix=${INSTALL_DIR} \
    --with-sysroot=${INSTALL_DIR} \
    --enable-shared \
    --disable-static \
    --with-html \
    --with-history \
    --enable-ipv6=no \
    --with-icu \
    --with-zlib=${INSTALL_DIR} \
    --without-python

RUN set -xe; \
    make install \
    && cp xml2-config ${INSTALL_DIR}/bin/xml2-config

# Install FreeType2 (https://github.com/aseprite/freetype2/releases)

ENV VERSION_FREETYPE2=2.10.1
ENV FREETYPE2_BUILD_DIR=${BUILD_DIR}/freetype2

RUN set -xe; \
    mkdir -p ${FREETYPE2_BUILD_DIR}; \
    curl -Ls https://download-mirror.savannah.gnu.org/releases/freetype/freetype-${VERSION_FREETYPE2}.tar.xz \
    | tar xJvC ${FREETYPE2_BUILD_DIR} --strip-components=1

WORKDIR  ${FREETYPE2_BUILD_DIR}/

RUN set -xe; \
    sed -ri "s:.*(AUX_MODULES.*valid):\1:" modules.cfg

RUN set -xe; \
    sed -r "s:.*(#.*SUBPIXEL_RENDERING) .*:\1:" \
    -i include/freetype/config/ftoption.h

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib" \
    ./configure  \
    --prefix=${INSTALL_DIR} \
    --with-sysroot=${INSTALL_DIR} \
    --enable-freetype-config  \
    --disable-static \
    && make \
    && make install

# Install gperf

ENV VERSION_GPERF=3.1
ENV GPERF_BUILD_DIR=${BUILD_DIR}/gperf

RUN set -xe; \
    mkdir -p ${GPERF_BUILD_DIR}; \
    curl -Ls http://ftp.gnu.org/pub/gnu/gperf/gperf-${VERSION_GPERF}.tar.gz \
    | tar xzC ${GPERF_BUILD_DIR} --strip-components=1

WORKDIR  ${GPERF_BUILD_DIR}/

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib" \
    ./configure  \
    --prefix=${INSTALL_DIR} \
    && make \
    && make install

# Install Fontconfig (https://github.com/freedesktop/fontconfig/releases)

ENV VERSION_FONTCONFIG=2.13.92
ENV FONTCONFIG_BUILD_DIR=${BUILD_DIR}/fontconfig

RUN set -xe; \
    mkdir -p ${FONTCONFIG_BUILD_DIR}; \
    curl -Ls https://www.freedesktop.org/software/fontconfig/release/fontconfig-${VERSION_FONTCONFIG}.tar.gz \
    | tar xzC ${FONTCONFIG_BUILD_DIR} --strip-components=1

WORKDIR  ${FONTCONFIG_BUILD_DIR}/

RUN set -xe; \
    rm -f src/fcobjshash.h

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib" \
    FONTCONFIG_PATH=${INSTALL_DIR} \
    ./configure  \
    --sysconfdir=${INSTALL_DIR}/etc \
    --localstatedir=${INSTALL_DIR}/var \
    --prefix=${INSTALL_DIR} \
    --disable-docs \
    --enable-libxml2 \
    && make \
    && make install

# Install Libjpeg-Turbo (https://github.com/libjpeg-turbo/libjpeg-turbo/releases)

ENV VERSION_LIBJPEG=2.1.5
ENV LIBJPEG_BUILD_DIR=${BUILD_DIR}/libjpeg

RUN set -xe; \
    mkdir -p ${LIBJPEG_BUILD_DIR}/bin; \
    curl -Ls https://ftp.osuosl.org/pub/blfs/conglomeration/libjpeg-turbo/libjpeg-turbo-${VERSION_LIBJPEG}.tar.gz \
    | tar xzC ${LIBJPEG_BUILD_DIR} --strip-components=1

WORKDIR  ${LIBJPEG_BUILD_DIR}/bin/

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib" \
    cmake .. \
    -DCMAKE_BUILD_TYPE=RELEASE \
    -DENABLE_STATIC=FALSE \
    -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} \
    -DCMAKE_INSTALL_DEFAULT_LIBDIR=lib \
    -DCMAKE_PREFIX_PATH=${INSTALL_DIR} \
    && make \
    && make install

# Install OpenJPEG (https://github.com/uclouvain/openjpeg/releases)

ENV VERSION_OPENJPEG2=2.5.0
ENV OPENJPEG2_BUILD_DIR=${BUILD_DIR}/openjpeg2

RUN set -xe; \
    mkdir -p ${OPENJPEG2_BUILD_DIR}/bin; \
    curl -Ls https://github.com/uclouvain/openjpeg/archive/v${VERSION_OPENJPEG2}/openjpeg-${VERSION_OPENJPEG2}.tar.gz \
    | tar xzC ${OPENJPEG2_BUILD_DIR} --strip-components=1

WORKDIR  ${OPENJPEG2_BUILD_DIR}/bin/

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib" \
    cmake .. \
    -DCMAKE_BUILD_TYPE=RELEASE \
    -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} \
    -DBUILD_STATIC_LIBS=OFF \
    -DCMAKE_PREFIX_PATH=${INSTALL_DIR} \
    && make \
    && make install

# Install Libpng (https://github.com/glennrp/libpng/releases)

ENV VERSION_OPENPNG=1.6.39
ENV OPENPNG_BUILD_DIR=${BUILD_DIR}/libpng

RUN set -xe; \
    mkdir -p ${OPENPNG_BUILD_DIR}; \
    curl -Ls https://downloads.sourceforge.net/libpng/libpng-${VERSION_OPENPNG}.tar.xz \
    | tar xJvC ${OPENPNG_BUILD_DIR} --strip-components=1

WORKDIR  ${OPENPNG_BUILD_DIR}/

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib" \
    ./configure  \
    --prefix=${INSTALL_DIR} \
    --disable-static \
    && make \
    && make install

# Install LibTIFF (http://download.osgeo.org/libtiff)

ENV VERSION_LIBTIFF=4.1.0
ENV LIBTIFF_BUILD_DIR=${BUILD_DIR}/tiff

RUN set -xe; \
    mkdir -p ${LIBTIFF_BUILD_DIR}; \
    curl -Ls http://download.osgeo.org/libtiff/tiff-${VERSION_LIBTIFF}.tar.gz \
    | tar xzC ${LIBTIFF_BUILD_DIR} --strip-components=1

WORKDIR  ${LIBTIFF_BUILD_DIR}/

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib" \
    ./configure  \
    --prefix=${INSTALL_DIR} \
    --disable-static \
    && make \
    && make install

# Install Pixman (https://www.cairographics.org/releases)

ENV VERSION_PIXMAN=0.40.0
ENV PIXMAN_BUILD_DIR=${BUILD_DIR}/pixman

RUN set -xe; \
    mkdir -p ${PIXMAN_BUILD_DIR}; \
    curl -Ls https://www.cairographics.org/releases/pixman-${VERSION_PIXMAN}.tar.gz \
    | tar xzC ${PIXMAN_BUILD_DIR} --strip-components=1

WORKDIR  ${PIXMAN_BUILD_DIR}/

RUN set -xe; \
    ls -al ${PIXMAN_BUILD_DIR}

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib" \
    ./configure  \
    --prefix=${INSTALL_DIR} \
    --disable-static \
    && make \
    && make install

# Install Cairo (http://www.linuxfromscratch.org/blfs/view/svn/x/cairo.html)

ENV VERSION_CAIRO=1.17.6
ENV CAIRO_BUILD_DIR=${BUILD_DIR}/cairo

RUN set -xe; \
    mkdir -p ${CAIRO_BUILD_DIR}; \
    curl -Ls https://ftp.osuosl.org/pub/blfs/conglomeration/cairo/cairo-${VERSION_CAIRO}.tar.xz \
    | tar xJvC ${CAIRO_BUILD_DIR} --strip-components=1

WORKDIR  ${CAIRO_BUILD_DIR}/

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib" \
    ./configure  \
    --prefix=${INSTALL_DIR} \
    --disable-static \
    --enable-tee \
    && make \
    && make install

# Install Little CMS (https://downloads.sourceforge.net/lcms)

ENV VERSION_LCMS=2-2.11
ENV LCMS_BUILD_DIR=${BUILD_DIR}/lcms

RUN set -xe; \
    mkdir -p ${LCMS_BUILD_DIR}; \
    curl -Ls https://downloads.sourceforge.net/lcms/lcms${VERSION_LCMS}.tar.gz \
    | tar xzC ${LCMS_BUILD_DIR} --strip-components=1

WORKDIR  ${LCMS_BUILD_DIR}/

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib" \
    ./configure  \
    --prefix=${INSTALL_DIR} \
    --disable-static \
    && make \
    && make install

# Install Boost
# Boost 라이브러리 다운로드 및 설치

RUN yum install -y zlib-devel python-devel bzip2-devel libicu-devel

ENV VERSION_BOOST=1.76.0
ENV BOOST_BUILD_DIR=${BUILD_DIR}/boost

RUN set -xe; \
    mkdir ${BOOST_BUILD_DIR} && \
    curl -Ls https://boostorg.jfrog.io/artifactory/main/release/1.76.0/source/boost_1_76_0.tar.gz | \
    tar xzC ${BOOST_BUILD_DIR} --strip-components=1

WORKDIR ${BOOST_BUILD_DIR}

RUN ./bootstrap.sh --prefix=${INSTALL_DIR} --with-libraries=all && \
    ./b2 install --prefix=${INSTALL_DIR}

# Install Poppler Data (https://poppler.freedesktop.org/)
# https://gist.github.com/Dayjo/618794d4ff37bb82ddfb02c63b450a81
ENV VERSION_POPPLER_DATA=0.4.12
ENV POPPLER_DATA_BUILD_DIR=${BUILD_DIR}/poppler-data

RUN set -xe; \
    mkdir -p ${POPPLER_DATA_BUILD_DIR}; \
    curl -Ls https://poppler.freedesktop.org/poppler-data-${VERSION_POPPLER_DATA}.tar.gz \
    | tar xzvC ${POPPLER_DATA_BUILD_DIR} --strip-components=1

WORKDIR ${POPPLER_DATA_BUILD_DIR}

RUN set -xe; \
    make && make prefix=${INSTALL_DIR} install

# Install Poppler (https://gitlab.freedesktop.org/poppler/poppler/-/tags)

ENV VERSION_POPPLER=22.12.0
ENV POPPLER_BUILD_DIR=${BUILD_DIR}/poppler
ENV POPPLER_TEST_DIR=${BUILD_DIR}/poppler-test

RUN set -xe; \
    mkdir -p ${POPPLER_TEST_DIR}; \
    git clone git://git.freedesktop.org/git/poppler/test ${POPPLER_TEST_DIR}

RUN set -xe; \
    mkdir -p ${POPPLER_BUILD_DIR}/bin; \
    curl -Ls https://poppler.freedesktop.org/poppler-${VERSION_POPPLER}.tar.xz \
    | tar xJvC ${POPPLER_BUILD_DIR} --strip-components=1

WORKDIR  ${POPPLER_BUILD_DIR}/bin/

RUN set -xe; \
    CFLAGS="" \
    CPPFLAGS="-I${INSTALL_DIR}/include  -I/usr/include -I/usr/include/boost" \
    LDFLAGS="-L${INSTALL_DIR}/lib64 -L${INSTALL_DIR}/lib -L/usr/lib" \
    cmake .. \
    -DCMAKE_BUILD_TYPE=Release \
    -DTESTDATADIR=${POPPLER_TEST_DIR} \
    -DBUILD_SHARED_LIBS=ON \
    -DENABLE_UNSTABLE_API_ABI_HEADERS=ON \
    -DBUILD_GTK_TESTS=OFF \
    -DBUILD_QT5_TESTS=OFF \
    -DCMAKE_INSTALL_PREFIX=${INSTALL_DIR} \
    -DCMAKE_PREFIX_PATH=${INSTALL_DIR} \
    -DENABLE_GTK_DOC=OFF \
    -DENABLE_QT5=OFF \
    && make \
    && make install

WORKDIR  ${POPPLER_BUILD_DIR}/bin/