Skip to content

Instantly share code, notes, and snippets.

@leodutra
Last active September 28, 2020 16:33
Show Gist options
  • Select an option

  • Save leodutra/8d8e726cf63bac7db93cac83c14d06c3 to your computer and use it in GitHub Desktop.

Select an option

Save leodutra/8d8e726cf63bac7db93cac83c14d06c3 to your computer and use it in GitHub Desktop.
Grub Config + Fix NVIDIA Freezes
GRUB_DEFAULT=0
# !!! GRUB_HIDDEN_TIMEOUT requires GRUB_TIMEOUT=0
#GRUB_TIMEOUT=5
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR="Arch"
# !!! add "intel_pstate=disable" to CMDLINE_LINUX_DEFAULT for no CPU sleeps (when NVidia freezes, bad drivers)
# !!! blacklisting nouveau for better proprietary handling
GRUB_CMDLINE_LINUX_DEFAULT="nouveau.blacklist=1 quiet sysrq_always_enabled=1"
GRUB_CMDLINE_LINUX=""
# !!! Hide menu, unless shift key is held down during GRUB's start-up
GRUB_FORCE_HIDDEN_MENU="true"
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
# !!! Reduced time from 5 and uncommented next 2 lines
GRUB_HIDDEN_TIMEOUT=2
GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
# !!! Defining a GFX mode for NVidia kernel problems (bad drivers)
# !!! NVidia 370+ uses <width>x<height>-<depth> and not <width>x<height>x<depth>
# !!! GRUB will can use this config for the splash too
# GRUB_GFXMODE=auto
GRUB_GFXMODE=1920x1080-24,auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
### ATTENTION TO:
# Option "ConnectToAcpid" "0"
# Option "NoLogo" "1"
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 375.26 (builduser@felix) Fri Dec 16 13:16:44 CST 2016
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 375.26 (buildmeister@swio-display-x86-rhel47-01) Thu Dec 8 19:07:46 PST 2016
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "AOC 2351"
HorizSync 30.0 - 83.0
VertRefresh 50.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 960"
Option "ConnectToAcpid" "0"
Option "NoLogo" "1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-0"
Option "metamodes" "1920x1080_60 +0+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment