tizen-common-rzr-20140809.log

gistfile1.txt

U-Boot SPL 2014.04-10677-g44910e9 (May 26 2014 - 11:44:50)
Board: A20-OLinuXino_MICRO
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600


U-Boot 2014.04-10677-g44910e9 (May 26 2014 - 11:44:50) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Board: A20-OLinuXino_MICRO
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   emac
Hit any key to stop autoboot:  2  0 
sun7i# printenv
autoboot=run loadkernel && run setargs && true && bootm 0x48000000
baudrate=115200
boot_ram=saved_stdout=$stdout;setenv stdout nc;if iminfo 0x41000000; then true; setenv stdout $saved_stdout; source 0x41000000;else setenv stdout $saved_stdout;fi
bootcmd=if run loadbootenv; then echo Loaded environment from ${bootenv};env import -t ${scriptaddr} ${filesize};fi;if test -n "${uenvcmd}"; then echo Running uenvcmd ...;run uenvcmd;fi;if run loadbootscr; then echo Jumping to ${bootscr};source ${scriptaddr};fi;run autoboot;
bootdelay=2
bootenv=uEnv.txt
bootm_size=0x10000000
bootscr=boot.scr
console=ttyS0,115200
device=mmc
ethact=emac
kernel=uImage
loadbootenv=fatload $device $partition $scriptaddr ${bootenv} || ext2load $device $partition $scriptaddr boot/${bootenv} || ext2load $device $partition $scriptaddr ${bootenv}
loadbootscr=fatload $device $partition $scriptaddr ${bootscr} || ext2load $device $partition $scriptaddr boot/${bootscr} ||ext2load $device $partition $scriptaddr ${bootscr}
loadkernel=if bootpath=/boot/ && ext2load $device $partition 0x43000000 ${bootpath}${script} && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; elif bootpath=/ && fatload $device $partition 0x43000000 ${script} && fatload $device $partition 0x48000000 ${kernel};then true; elif bootpath=/ && ext2load $device $partition 0x43000000 ${bootpath}${script} && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; else false;fi
loglevel=8
panicarg=panic=10
partition=0:1
script=script.bin
scriptaddr=0x44000000
setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "/boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs}
stderr=serial
stdin=serial
stdout=serial

Environment size: 1882/131068 bytes
sun7i# bootd
reading uEnv.txt
** Unable to read file uEnv.txt **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading boot.scr
389 bytes read in 16 ms (23.4 KiB/s)
Jumping to boot.scr
## Executing script at 44000000
reading uImage
4492952 bytes read in 238 ms (18 MiB/s)
reading sun7i-a20-olinuxino-micro.dtb
22905 bytes read in 29 ms (770.5 KiB/s)
## Booting kernel from Legacy Image at 46000000 ...
   Image Name:   Linux-3.4.90-00269-g985fd20-dirt
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4492888 Bytes = 4.3 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 49000000
   Booting using the fdt blob at 0x49000000
   Loading Kernel Image ... OK
   Using Device Tree in place at 49000000, end 49008978

Starting kernel ...

<6>Booting Linux on physical CPU 0

<6>Initializing cgroup subsys cpuset

<6>Initializing cgroup subsys cpu

<5>Linux version 3.4.90-00269-g985fd20-dirty (pcoval@pcoval) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #89 SMP PREEMPT Tue May 27 17:46:57 CEST 2014

CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine: sun7i

<6>Memory Reserved:

<6>	SYS  : 0x43000000 - 0x4300ffff  (  64 kB)

<6>	VE   : 0x44000000 - 0x48ffffff  (  80 MB)

<6>	G2D  : 0x49000000 - 0x49ffffff  (  16 MB)

<6>	LCD  : 0x4a000000 - 0x4bffffff  (  32 MB)

Memory policy: ECC disabled, Data cache writealloc

<6>sunxi: Allwinner A20 (AW1651/sun7i) detected.

<7>On node 0 totalpages: 131072

<7>free_area_init_node: node 0, pgdat c0905a80, node_mem_map d0000000

<7>  DMA zone: 512 pages used for memmap

<7>  DMA zone: 0 pages reserved

<7>  DMA zone: 65024 pages, LIFO batch:15

<7>  Normal zone: 512 pages used for memmap

<7>  Normal zone: 65024 pages, LIFO batch:15

<6>PERCPU: Embedded 8 pages/cpu @d0405000 s11712 r8192 d12864 u32768

<7>pcpu-alloc: s11712 r8192 d12864 u32768 alloc=8*4096<c>

<7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048

<5>Kernel command line: console=ttyS0,115200 console=ttyBF0,57600 root=/dev/mmcblk0p2 rootwait rootdelay=3 rw init=/init loglevel=0 security=none consoleblank=0 disp_mode=4 disp.screen0_output_type=3 disp.screen1_output_type=4 vga=791

<6>PID hash table entries: 2048 (order: 1, 8192 bytes)

<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>allocated 1048576 bytes of page_cgroup

<6>please try 'cgroup_disable=memory' option if you don't want memory cgroups

<6>Memory: 512MB = 512MB total

<5>Memory: 377280k/377280k available, 147008k reserved, 0K highmem

<5>Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)

    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)

    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

    modules : 0xbf000000 - 0xbfe00000   (  14 MB)

      .text : 0xc0008000 - 0xc0850084   (8481 kB)

      .init : 0xc0851000 - 0xc089cdc0   ( 304 kB)

      .data : 0xc089e000 - 0xc0912030   ( 465 kB)

       .bss : 0xc0912054 - 0xc0a04b40   ( 971 kB)

<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

<6>Preemptible hierarchical RCU implementation.

<6>	RCU dyntick-idle grace-period acceleration is enabled.

<6>	Additional per-CPU info printed with stalls.

<6>NR_IRQS:192

<6>Architected local timer running at 24.00MHz.

<6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms

<2>start_kernel(): bug: interrupts were enabled early

<6>Console: colour dummy device 80x30

<6>Calibrating delay loop... <c>1908.73 BogoMIPS (lpj=9543680)

<6>pid_max: default: 32768 minimum: 301

<6>Mount-cache hash table entries: 512

<6>Initializing cgroup subsys cpuacct

<6>Initializing cgroup subsys memory

<6>Initializing cgroup subsys devices

<6>Initializing cgroup subsys freezer

<6>Initializing cgroup subsys blkio

<6>Initializing cgroup subsys perf_event

<6>CPU: Testing write buffer coherency: ok

<6>ftrace: allocating 21254 entries in 63 pages

<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

<6>hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available

<6>Setting up static identity map for 0x405d5188 - 0x405d51e0

CPU1: Booted secondary processor

<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

<6>Brought up 2 CPUs

<6>SMP: Total of 2 processors activated (3824.02 BogoMIPS).

<6>devtmpfs: initialized

<6>dummy: 

<6>NET: Registered protocol family 16

<6>DMA: preallocated 256 KiB pool for atomic coherent allocations

<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

<6>hw-breakpoint: maximum watchpoint size is 8 bytes.

<6>[ccu-inf] aw clock manager init

<6>[ccu-inf] aw_ccu_init

<6>Init eGon pin module V2.0

<6>bio: create slab <bio-0> at 0

<6>sunxi_gpio driver init ver 1.3

<6>sunxi_gpio_probe can't find script.bin '[gpio_para]' 'gpio_used'

<4>gpio-sunxi: probe of gpio-sunxi failed with error -4

<5>SCSI subsystem initialized

<7>libata version 3.00 loaded.

<6>usbcore: registered new interface driver usbfs

<6>usbcore: registered new interface driver hub

<6>usbcore: registered new device driver usb

<6>Linux video capture interface: v2.00

<6>Advanced Linux Sound Architecture Driver Version 1.0.25.

<6>Switching to clocksource arch_sys_counter

<5>FS-Cache: Loaded

<6>CacheFiles: Loaded

WRN:L146(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get usbc(0) enable failed

WRN:L152(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get usbc(0) port type failed

WRN:L158(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get usbc(0) detect type failed

WRN:L164(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get usbc(0) id failed

WRN:L170(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get usbc(0) det_vbus failed

WRN:L176(drivers/usb/sunxi_usb/manager/usb_manager.c):ERR: get usbc(0) drv_vbus failed

WRN:L485(drivers/usb/sunxi_usb/manager/usb_manager.c):wrn: usb0 is disable

axp driver uning configuration failed(356)

<6>NET: Registered protocol family 2

<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)

<6>TCP bind hash table entries: 16384 (order: 5, 196608 bytes)

<6>TCP: Hash tables configured (established 16384 bind 16384)

<6>TCP: reno registered

<6>UDP hash table entries: 256 (order: 1, 8192 bytes)

<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

<6>NET: Registered protocol family 1

<6>RPC: Registered named UNIX socket transport module.

<6>RPC: Registered udp transport module.

<6>RPC: Registered tcp transport module.

<6>RPC: Registered tcp NFSv4.1 backchannel transport module.

<3>dram para dram_baseaddr fetch err

<3>aw_pm_init: fetch_and_save_dram_para err.

<5>VFS: Disk quotas dquot_6.5.2

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

<5>NFS: Registering the id_resolver key type

<6>NTFS driver 2.1.30 [Flags: R/W].

<6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

<6>msgmni has been set to 736

<3>alg: comp: Compression test 1 failed for lzo-generic: output len = 57

<6>alg: No test for stdrng (krng)

<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

<6>io scheduler noop registered

<6>io scheduler deadline registered

<6>io scheduler cfq registered (default)

<6>sunxi disp driver loaded (/dev/disp api 1.0)

<6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled

<3>[uart]: failed to get uart0's used information

<3>[uart]: failed to get uart1's used information

<3>[uart]: failed to get uart2's used information

<3>[uart]: failed to get uart3's used information

<3>[uart]: failed to get uart4's used information

<3>[uart]: failed to get uart5's used information

<3>[uart]: failed to get uart6's used information

<3>[uart]: failed to get uart7's used information

<7>G2D: drv_g2d_init

<6>G2D: g2dmem: g2d_start=49000000, g2d_size=1000000

<6>G2D: head:c9000000,tail:ca000000

<6>G2D: Module initialized.major:251

<6>[drm] Initialized drm 1.1.0 20060810

<6>brd: module loaded

<6>loop: module loaded

nand init fetch emac using configuration failed

nand driver is disabled 

<4>AHCI is disabled in script.bin

<4>emac_init fetch emac using configuration failed

<6>emac driver is disabled

<6>PPP generic driver version 2.4.2

<6>PPP BSD Compression module registered

<6>PPP Deflate Compression module registered

<6>NET: Registered protocol family 24

<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

WRN:L94(drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc2 enable failed

WRN:L104(drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc1(usbc1) id failed

WRN:L430(drivers/usb/host/sw_hci_sunxi.c):ERR: gpio_request failed

WRN:L816(drivers/usb/host/sw_hci_sunxi.c):ERR: alloc_pin failed

WRN:L94(drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc2 enable failed

WRN:L104(drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc1(usbc1) id failed

WRN:L430(drivers/usb/host/sw_hci_sunxi.c):ERR: gpio_request failed

WRN:L816(drivers/usb/host/sw_hci_sunxi.c):ERR: alloc_pin failed

WRN:L94(drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc2 enable failed

WRN:L104(drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc2(usbc2) id failed

WRN:L430(drivers/usb/host/sw_hci_sunxi.c):ERR: gpio_request failed

WRN:L816(drivers/usb/host/sw_hci_sunxi.c):ERR: alloc_pin failed

WRN:L94(drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc2 enable failed

WRN:L104(drivers/usb/host/sw_hci_sunxi.c):ERR: get usbc2(usbc2) id failed

WRN:L430(drivers/usb/host/sw_hci_sunxi.c):ERR: gpio_request failed

WRN:L816(drivers/usb/host/sw_hci_sunxi.c):ERR: alloc_pin failed

<6>mousedev: PS/2 mouse device common for all mice

try to request ir_para gpio failed

<6>input: sunxi-ir as /devices/virtual/input/input0

IR Initial OK

===========================hv_keypad_init=====================

========HV Inital ===================

<3>hv_keyboard: script_parser_fetch err. 

<5>=========script_parser_fetch_err============

hv_keypad_init: err.

<3>sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.

<3>sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!

<6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0

<6>i2c /dev entries driver

<6>device-mapper: uevent: version 1.0.3

<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]

<6>device-mapper: multipath: version 1.3.0 loaded

<6>device-mapper: multipath round-robin: version 1.0.0 loaded

<6>device-mapper: multipath queue-length: version 0.1.0 loaded

<6>device-mapper: multipath service-time: version 0.2.0 loaded

<6>cpuidle: using governor ladder

<6>cpuidle: using governor menu

<6>usbcore: registered new interface driver ushc

<6>[mmc-msg] sw_mci_init

<6>[mmc-msg] get mmc0's used failed

<6>[mmc-msg] Not using mmc0 due to script.bin parse failure

<6>[mmc-msg] get mmc1's used failed

<6>[mmc-msg] Not using mmc1 due to script.bin parse failure

<6>[mmc-msg] get mmc2's used failed

<6>[mmc-msg] Not using mmc2 due to script.bin parse failure

<6>[mmc-msg] get mmc3's used failed

<6>[mmc-msg] Not using mmc3 due to script.bin parse failure

<6>[mmc-msg] MMC host used card: 0x0, boot card: 0x0, io_card 0

[mmc_pm]: failed to fetch sdio card configuration!

<6>sunxi_leds driver init

<6>sunxi leds can't find script data '[leds_para]' 'leds_used'

<6>ledtrig-cpu: registered to indicate activity on CPUs

<6>usbcore: registered new interface driver usbhid

<6>usbhid: USB HID core driver

<6>IPv4 over IPv4 tunneling driver

<6>TCP: bic registered

<6>TCP: cubic registered

<6>TCP: westwood registered

<6>TCP: htcp registered

<6>Initializing XFRM netlink socket

<6>NET: Registered protocol family 17

<6>NET: Registered protocol family 15

<5>Registering the dns_resolver key type

<6>VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4

<5>Registering SWP/SWPB emulation handler

<3>[cpu_freq] ERR:try to get regulator failed, core vdd will not changed!

<6>[cpu_freq] INF:use default V-F Table

<3>[cpu_freq] ERR:get cpu max frequency from sysconfig failed

<3>[cpu_freq] ERR:sunxi_cpufreq_initcall, use default cpu max/min frequency, max freq: 1008MHz, min freq: 60MHz

<4>[DISP] lcd0_para.lcd_used not exit

<4>[DISP] lcd1_para.lcd_used not exit

<4>[DISP] fetch script data disp_init.disp_init_enable fail

<6>I2C: i2c-0: HDMI I2C adapter

<6>ParseEDID