Last active
March 11, 2022 21:10
-
-
Save lheckemann/ee854e849822f580b657c33bc54e297f to your computer and use it in GitHub Desktop.
Boot log for XORO HST280
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
CPU will restart. | |
Bootrom start | |
Boot Media: eMMC (Default Speed) | |
Decrypt auxiliary code ...OK | |
lsadc voltage min: 000001C4, max: 000001C5, aver: 000001C4, index: 0000000A | |
Enter boot auxiliary code | |
Auxiliary code - v1.00 | |
DDR code - V2.1.7 20190326 | |
Build: May 30 2020 - 15:19:59 | |
Reg Version: v2.1.0` | |
Reg Time: 2020/06/11 16:15:25 | |
Reg Name: hi3798m13dml3_hi3798mv130_LPDDR4-1600_1.5GB_32bitx1_2layers.re5 | |
HPM: 0x0000011A | |
SVB done... | |
Set cpu freq | |
Boot auxiliary code success | |
Bootrom success | |
System startup | |
Relocate Boot | |
Jump to C code | |
Fastboot 3.3.0 (chenjian@) (Oct 14 2020 - 14:20:15) | |
Fastboot: Version 3.3.0 | |
Build Date: Oct 14 2020, 14:21:32 | |
CPU: Hi3798Mv130 | |
Boot Media: eMMC | |
DDR Size: 1536MB | |
Found flash memory controller hifmc100. | |
no found nand device. | |
MMC/SD controller initialization. | |
scan edges:2 p2f:6 f2p:1 | |
mix set temp-phase 3 | |
scan elemnts: startp:3 endp:130 | |
Tuning SampleClock. mix set phase:[03/07] ele:[15/17] | |
MMC/SD Card: | |
MID: 0x15 | |
Read Block: 512 Bytes | |
Write Block: 512 Bytes | |
Chip Size: 7456M Bytes (High Capacity) | |
Name: "8GTF4R" | |
Chip Type: MMC | |
Version: 5.1 | |
Speed: 100000000Hz | |
Mode: HS400 | |
Voltage: 1.8V | |
Bus Width: 8bit | |
Boot Addr: 0 Bytes | |
Net: up | |
Boot Env on eMMC | |
Env Offset: 0x00100000 | |
Env Size: 0x00010000 | |
Env Range: 0x00010000 | |
SDK Version: HiSTBAndroidV800R001C00SPC120_v2020050515 | |
vfd tag is not off | |
set_serialno: serialno not setcount=2 | |
MMC read: dev # 0, block # 45056, count 1 ... 1 blocks read: OK | |
2400000 Bytes/s | |
deviceinfo_data ======= 0x30343a32323a30303a38313a36653a6335 | |
check remote recovery button begin | |
mac:04:22:00:81:6e:c5 | |
Reserve Memory | |
Start Addr: 0x5FFFE000 | |
Bound Addr: 0x8DA6000 | |
Free Addr: 0x5EC7F000 | |
Alloc Block: Addr Size | |
0x5FBFD000 0x400000 | |
0x5F8FC000 0x300000 | |
0x5F8F9000 0x2000 | |
0x5F878000 0x80000 | |
0x5F876000 0x1000 | |
0x5F775000 0x100000 | |
0x5F476000 0x2FE000 | |
0x5EC8B000 0x7EA000 | |
0x5EC89000 0x1000 | |
0x5EC7F000 0x9000 | |
Press Ctrl+C to stop autoboot | |
MMC read: dev # 0, block # 225280, count 51200 ... 51200 blocks read: OK | |
175505248 Bytes/s | |
MMC read: dev # 0, block # 98304, count 60 ... 60 blocks read: OK | |
73846153 Bytes/s | |
## Booting kernel from Legacy Image at 01ffffc0 ... | |
Image Name: Linux-4.9.118_Linux | |
Image Type: ARM Linux Kernel Image (uncompressed) | |
Data Size: 10143669 Bytes = 9.7 MiB | |
Load Address: 02000000 | |
Entry Point: 02000000 | |
## Flattened Device Tree blob at 03ffc000 | |
Booting using the fdt blob at 0x3ffc000 | |
XIP Kernel Image ... OK | |
OK | |
ATAGS [0x00000100 - 0x00000588], 1160Bytes | |
Starting kernel ... | |
Uncompressing Linux... done, booting the kernel. | |
Booting Linux on physical CPU 0x0 | |
Linux version 4.9.118_Linux (chenjian@Ubuntu7) (gcc version 4.9.4 20151028 (prerelease) (gcc-linaro-4.9-2016.02 + glibc-2.25 (Build by czyong) Thu Feb 23 17:07:45 CST 2017) ) #3 SMP PREEMPT Wed Oct 14 14:17:43 HKT 2020 | |
CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d | |
CPU: div instructions available: patching division code | |
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
initmrd: found no initmrd. | |
OF: fdt:Machine model: Hisilicon | |
cma: Reserved 52 MiB at 0x5b800000 | |
Memory policy: Data cache writealloc | |
percpu: Embedded 15 pages/cpu @df7b2000 s31040 r8192 d22208 u61440 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 392184 | |
Kernel command line: androidboot.hardware=bigfish androidboot.selinux=permissive androidboot.serialno=0123456789 console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastboot),512K(bootargs),512K(bootargsbak),20M(recovery),2M(deviceinfo),8M(securestore),8M(baseparam),8M(pqparam),2M(dtbo),10M(logo),10M(logobak),20M(fastplay),20M(recoverybak),60M(boot),20M(misc),20M(trustedcore),1700M(system)rw,796M(cache),400M(vendor)ro,-(userdata) hbcomp=/dev/block/mmcblk0p17 init=/init root=/dev/mmcblk0p17 androidboot.dtbo_idx=0 pq=noacmuhd is_show_vfd=1 mem=1536M mmz=ddr,0,0,52M vmalloc=500M | |
is_show_vfd 1 | |
log_buf_len individual max cpu contribution: 4096 bytes | |
log_buf_len total cpu_extra contributions: 12288 bytes | |
log_buf_len min size: 16384 bytes | |
log_buf_len: 32768 bytes | |
early log buf free: 13964(85%) | |
PID hash table entries: 2048 (order: 1, 8192 bytes) | |
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
Memory: 1470364K/1572864K available (14336K kernel code, 1862K rwdata, 5152K rodata, 1024K init, 3188K bss, 49252K reserved, 53248K cma-reserved, 981576K highmem) | |
Virtual kernel memory layout: | |
vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) | |
lowmem : 0xc0000000 - 0xe0400000 ( 516 MB) | |
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
.text : 0xc0008000 - 0xc0f00000 (15328 kB) | |
.init : 0xc1500000 - 0xc1600000 (1024 kB) | |
.data : 0xc1600000 - 0xc17d1b88 (1863 kB) | |
.bss : 0xc17d3000 - 0xc1af02dc (3189 kB) | |
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
Preemptible hierarchical RCU implementation. | |
Build-time adjustment of leaf fanout to 32. | |
NR_IRQS:352 | |
clocksource: hisp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns | |
Console: colour dummy device 80x30 | |
Calibrating delay loop... 2383.87 BogoMIPS (lpj=1191936) | |
pid_max: default: 32768 minimum: 301 | |
Security Framework initialized | |
SELinux: Initializing. | |
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
CPU: Testing write buffer coherency: ok | |
CPU0: update cpu_capacity 1024 | |
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
Setting up static identity map for 0x100000 - 0x100058 | |
CPU: hi3798mv130 | |
CPU1: update cpu_capacity 1024 | |
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
CPU2: update cpu_capacity 1024 | |
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
CPU3: update cpu_capacity 1024 | |
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
Brought up 4 CPUs | |
SMP: Total of 4 processors activated (9572.35 BogoMIPS). | |
CPU: All CPU(s) started in SVC mode. | |
CPU3: update max cpu_capacity 1024 | |
VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 | |
CPU2: update max cpu_capacity 1024 | |
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns | |
futex hash table entries: 1024 (order: 4, 65536 bytes) | |
NET: Registered protocol family 16 | |
DMA: preallocated 256 KiB pool for atomic coherent allocations | |
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | |
hw-breakpoint: maximum watchpoint size is 8 bytes. | |
Serial: AMBA PL011 UART driver | |
pl061_gpio f8b20000.gpio0: PL061 GPIO chip @0xf8b20000 registered | |
pl061_gpio f8b21000.gpio1: PL061 GPIO chip @0xf8b21000 registered | |
pl061_gpio f8b22000.gpio2: PL061 GPIO chip @0xf8b22000 registered | |
pl061_gpio f8b23000.gpio3: PL061 GPIO chip @0xf8b23000 registered | |
pl061_gpio f8b24000.gpio4: PL061 GPIO chip @0xf8b24000 registered | |
pl061_gpio f8004000.gpio5: PL061 GPIO chip @0xf8004000 registered | |
pl061_gpio f8b26000.gpio6: PL061 GPIO chip @0xf8b26000 registered | |
pl061_gpio f8b27000.gpio7: PL061 GPIO chip @0xf8b27000 registered | |
pl061_gpio f8b28000.gpio8: PL061 GPIO chip @0xf8b28000 registered | |
f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 96, base_baud = 0) is a PL011 rev2 | |
random: fast init done | |
console [ttyAMA0] enabled | |
f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 97, base_baud = 0) is a PL011 rev2 | |
f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 98, base_baud = 0) is a PL011 rev2 | |
g_hisi_iommu_ptable_addr:phy 0x1e400000 size:0x400000 | |
g_hisi_iommu_err_rdaddr :phy 0x1f343c00 size:0x200 | |
g_hisi_iommu_err_wraddr :phy 0x1f343e00 size:0x200 | |
in hisi_iommu_domain_init start | |
in hisi_iommu_domain_init end | |
vgaarb: loaded | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
media: Linux media interface: v0.10 | |
Linux video capture interface: v2.00 | |
Advanced Linux Sound Architecture Driver Initialized. | |
Bluetooth: Core ver 2.22 | |
NET: Registered protocol family 31 | |
Bluetooth: HCI device and connection manager initialized | |
Bluetooth: HCI socket layer initialized | |
Bluetooth: L2CAP socket layer initialized | |
Bluetooth: SCO socket layer initialized | |
clocksource: Switched to clocksource hisp804 | |
VFS: Disk quotas dquot_6.6.0 | |
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
NET: Registered protocol family 2 | |
TCP established hash table entries: 4096 (order: 2, 16384 bytes) | |
TCP bind hash table entries: 4096 (order: 3, 32768 bytes) | |
TCP: Hash tables configured (established 4096 bind 4096) | |
UDP hash table entries: 256 (order: 1, 8192 bytes) | |
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
NET: Registered protocol family 1 | |
hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available | |
audit: initializing netlink subsys (disabled) | |
audit: type=2000 audit(0.344:1): initialized | |
workingset: timestamp_bits=30 max_order=19 bucket_order=0 | |
squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
Registering sdcardfs 0.1 | |
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | |
fuse init (API version 7.26) | |
bounce: pool size: 64 pages | |
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) | |
io scheduler noop registered | |
io scheduler deadline registered (default) | |
io scheduler cfq registered | |
input: Hi keyboard as /devices/virtual/input/input0 | |
input: Hi mouse as /devices/virtual/input/input1 | |
input: qwerty as /devices/virtual/input/input2 | |
Hi Android vinput driver init successful! | |
hiotg: registered new interface otg driver | |
virtual device initialization. | |
FD650: fd650_driver_init: FD650 Driver init. | |
FD650: enter func:fd650_driver_probe | |
FD650: NOTE: register_fd650_driver:::register fd650 driver success | |
Mali: Mali device driver loaded | |
brd: module loaded | |
loop: module loaded | |
zram: Added device: zram0 | |
hifmc100: registerd new interface driver hifmc100. | |
hifmc100: Found flash memory controller hifmc100. | |
hifmc100: no found spi-nor device. | |
hifmc100: no found nand device. | |
hifmc100: no found spi-nand device. | |
libphy: Fixed MDIO Bus: probed | |
tun: Universal TUN/TAP device driver, 1.6 | |
tun: (C) 1999-2004 Max Krasnyansky <[email protected]> | |
FEPHY:addr=2, la_am=0xc, ldo_am=0x5, r_tuning=0x20 | |
libphy: himii: probed | |
hi_eth: attached port 0 PHY 2 to driver HiSilicon Festa s28v112 | |
libphy: himii: probed | |
hi_eth: hieth_mdiobus_read,73:mdio busy | |
hi_eth: connect to port[0] PHY failed! | |
hi_eth: no dev probed! | |
PPP generic driver version 2.4.2 | |
PPP BSD Compression module registered | |
PPP Deflate Compression module registered | |
PPP MPPE Compression module registered | |
NET: Registered protocol family 24 | |
usbcore: registered new interface driver asix | |
usbcore: registered new interface driver ax88179_178a | |
usbcore: registered new interface driver cdc_ether | |
usbcore: registered new interface driver dm9601 | |
usbcore: registered new interface driver net1080 | |
usbcore: registered new interface driver cdc_subset | |
usbcore: registered new interface driver zaurus | |
usbcore: registered new interface driver cdc_ncm | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
ehci-pci: EHCI PCI platform driver | |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
ohci-pci: OHCI PCI platform driver | |
usbcore: registered new interface driver cdc_wdm | |
usbcore: registered new interface driver usb-storage | |
usbcore: registered new interface driver usbserial | |
usbcore: registered new interface driver option | |
usbserial: USB Serial support registered for GSM modem (1-port) | |
hiudc: version 3.00a 10-AUG-2012 | |
Core Release: 3.10a | |
Setting default values for core params | |
Using Buffer DMA mode | |
Dedicated Tx FIFOs mode | |
mousedev: PS/2 mouse device common for all mice | |
usbcore: registered new interface driver xpad | |
usbcore: registered new interface driver usb_acecad | |
usbcore: registered new interface driver aiptek | |
usbcore: registered new interface driver gtco | |
usbcore: registered new interface driver hanwang | |
usbcore: registered new interface driver kbtab | |
i2c /dev entries driver | |
usbcore: registered new interface driver uvcvideo | |
USB Video Class driver (1.1.1) | |
__power_supply_register: Expected proper parent device for 'test_ac' | |
__power_supply_register: Expected proper parent device for 'test_battery' | |
__power_supply_register: Expected proper parent device for 'test_usb' | |
sp805-wdt f8a2c000.watchdog: registration successful | |
device-mapper: uevent: version 1.0.3 | |
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected] | |
registered new interface driver himciV3.0_4.9.118_Linux_20170401 | |
scan edges:2 p2f:6 f2p:1 | |
mix set temp-phase 3 | |
scan elemnts: startp:3 endp:123 | |
Tuning SampleClock. mix set phase:[03/07] ele:[15/16] | |
f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected! | |
mmc0: new HS400 MMC card at address 0001 | |
mmcblk0: mmc0:0001 8GTF4R 7.28 GiB | |
mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB | |
mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB | |
mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB | |
mmcblk0: p1(fastboot) p2(bootargs) p3(bootargsbak) p4(recovery) p5(deviceinfo) p6(securestore) p7(baseparam) p8(pqparam) p9(dtbo) p10(logo) p11(logobak) p12(fastplay) p13(recoverybak) p14(boot) p15(misc) p16(trustedcore) p17(system) p18(cache) p19(vendor) p20(userdata) | |
f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected! | |
hidraw: raw HID events driver (C) Jiri Kosina | |
usbcore: registered new interface driver usbhid | |
usbhid: USB HID core driver | |
ashmem: initialized | |
usbcore: registered new interface driver snd-usb-audio | |
oprofile: using timer interrupt. | |
GACT probability on | |
Mirror/redirect action on | |
Simple TC action Loaded | |
netem: version 1.3 | |
u32 classifier | |
Performance counters on | |
input device check on | |
Actions configured | |
Netfilter messages via NETLINK v0.30. | |
nf_conntrack version 0.5.0 (16384 buckets, 65536 max) | |
ctnetlink v0.93: registering with nfnetlink. | |
xt_time: kernel timezone is -0000 | |
IPVS: Registered protocols () | |
IPVS: Connection hash table configured (size=4096, memory=32Kbytes) | |
IPVS: Creating netns size=984 id=0 | |
IPVS: ipvs loaded. | |
IPv4 over IPsec tunneling driver | |
ip_tables: (C) 2000-2006 Netfilter Core Team | |
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully | |
arp_tables: arp_tables: (C) 2002 David S. Miller | |
Initializing XFRM netlink socket | |
NET: Registered protocol family 10 | |
mip6: Mobile IPv6 | |
ip6_tables: (C) 2000-2006 Netfilter Core Team | |
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
NET: Registered protocol family 17 | |
NET: Registered protocol family 15 | |
Bridge firewalling registered | |
Bluetooth: RFCOMM TTY layer initialized | |
Bluetooth: RFCOMM socket layer initialized | |
Bluetooth: RFCOMM ver 1.11 | |
Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
Bluetooth: BNEP filters: protocol multicast | |
Bluetooth: BNEP socket layer initialized | |
Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
Bluetooth: HIDP socket layer initialized | |
8021q: 802.1Q VLAN Support v1.8 | |
lib80211: common routines for IEEE802.11 drivers | |
Registering SWP/SWPB emulation handler | |
registered taskstats version 1 | |
hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok | |
vfmw v6.2 | |
hctosys: unable to open rtc device (rtc0) | |
[rfkill]: sw_rfkill_init | |
ALSA device list: | |
#0: HISI-AIAO | |
EXT4-fs (mmcblk0p17): couldn't mount as ext3 due to feature incompatibilities | |
EXT4-fs (mmcblk0p17): warning: mounting unchecked fs, running e2fsck is recommended | |
EXT4-fs (mmcblk0p17): mounted filesystem without journal. Opts: (null) | |
VFS: Mounted root (ext4 filesystem) on device 259:9. | |
Freeing unused kernel memory: 1024K | |
init: init first stage started! | |
init: Using Android DT directory /proc/device-tree/firmware/android/ | |
init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab | |
EXT4-fs (mmcblk0p19): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8 | |
init: [libfs_mgr]__mount(source=/dev/block/platform/soc/f9830000.himciv200.MMC/by-name/vendor,target=/vendor,type=ext4)=0: Success | |
init: Skipped setting INIT_AVB_VERSION (not in recovery mode) | |
init: Loading SELinux policy | |
audit: type=1403 audit(2.991:2): policy loaded auid=4294967295 ses=4294967295 | |
selinux: SELinux: Loaded policy from /sepolicy | |
selinux: SELinux: Loaded file_contexts | |
random: init: uninitialized urandom read (40 bytes read) | |
init: init second stage started! | |
init: Using Android DT directory /proc/device-tree/firmware/android/ | |
selinux: SELinux: Loaded file_contexts | |
init: Running restorecon... | |
init: waitid failed: No child processes | |
init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory | |
init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0 | |
init: Forked subcontext for 'u:r:vendor_init:s0' with pid 1359 | |
random: init: uninitialized urandom read (40 bytes read) | |
init: Forked subcontext for 'u:r:vendor_init:s0' with pid 1360 | |
random: init: uninitialized urandom read (40 bytes read) | |
init: Parsing file /init.rc... | |
ueventd: ueventd started! | |
selinux: SELinux: Loaded file_contexts | |
ueventd: Parsing file /ueventd.rc... | |
ueventd: Parsing file /vendor/ueventd.rc... | |
ueventd: Parsing file /odm/ueventd.rc... | |
ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory | |
ueventd: Parsing file /ueventd.bigfish.rc... | |
ueventd: Unable to read config file '/ueventd.bigfish.rc': open() failed: No such file or directory | |
ueventd: Coldboot took 0.243 seconds | |
keychord: using input dev Hi keyboard for fevent | |
EXT4-fs (mmcblk0p20): Ignoring removed nomblk_io_submit option | |
EXT4-fs (mmcblk0p20): 2 orphan inodes deleted | |
EXT4-fs (mmcblk0p20): recovery complete | |
EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit | |
e2fsck: e2fsck 1.43.3 (04-Sep-2016) | |
e2fsck: Pass 1: Checking inodes, blocks, and sizes | |
e2fsck: Pass 2: Checking directory structure | |
e2fsck: Pass 3: Checking directory connectivity | |
e2fsck: Pass 4: Checking reference counts | |
e2fsck: Pass 5: Checking group summary information | |
e2fsck: /dev/block/platform/soc/f9830000.himciv200.MMC/by-name/userdata: 2064/278528 files (5.8% non-contiguous), 139752/1113600 blocks | |
EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc | |
EXT4-fs (mmcblk0p18): Ignoring removed nomblk_io_submit option | |
EXT4-fs (mmcblk0p18): recovery complete | |
EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit | |
urandom_read: 3 callbacks suppressed | |
random: e2fsck: uninitialized urandom read (40 bytes read) | |
random: e2fsck: uninitialized urandom read (40 bytes read) | |
audit: type=1400 audit(4.226:3): avc: denied { read } for pid=1788 comm="e2fsck" name="mmcblk0p18" dev="tmpfs" ino=6466 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1 | |
audit: type=1400 audit(4.244:4): avc: denied { open } for pid=1788 comm="e2fsck" path="/dev/block/mmcblk0p18" dev="tmpfs" ino=6466 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1 | |
audit: type=1400 audit(4.263:5): avc: denied { write } for pid=1788 comm="e2fsck" name="mmcblk0p18" dev="tmpfs" ino=6466 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1 | |
audit: type=1400 audit(4.282:6): avc: denied { ioctl } for pid=1788 comm="e2fsck" path="/dev/block/mmcblk0p18" dev="tmpfs" ino=6466 ioctlcmd=0x127c scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1 | |
e2fsck: e2fsck 1.43.3 (04-Sep-2016) | |
e2fsck: Pass 1: Checking inodes, blocks, and sizes | |
e2fsck: Pass 2: Checking directory structure | |
EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered | |
init: 4 output lines suppressed due to ratelimiting | |
zram0: detected capacity change from 0 to 979693568 | |
random: mkswap: uninitialized urandom read (40 bytes read) | |
mkswap: Swapspace size: 956728k, UUID=172420e4-1b21-427a-ae72-32f4c743492d | |
Adding 956728k swap on /dev/block/zram0. Priority:-1 extents:1 across:956728k SS | |
logd.auditd: start | |
logd.klogd: 4532461542 | |
binder: 1795:1795 ioctl 4018620d bea21a00 returned -22 | |
rfkill --------------- blocked:bt_reg_on: gpio4_2 low! | |
type=1400 audit(4.786:7): avc: denied { write } for pid=1 comm="init" name="state" dev="sysfs" ino=13725 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1 | |
type=1400 audit(4.786:7): avc: denied { write } for pid=1 comm="init" name="state" dev="sysfs" ino=13725 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1 | |
type=1400 audit(4.787:8): avc: denied { open } for pid=1 comm="init" path="/sys/devices/platform/hi-rfkill.0/rfkill/rfkill0/state" dev="sysfs" ino=13725 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1 | |
random: crng init done | |
random: 1 urandom warning(s) missed due to ratelimiting | |
logd.daemon: reinit | |
healthd: BatteryCurrentNowPath not found | |
healthd: BatteryCycleCountPath not found | |
file system registered | |
healthd: BatteryCurrentNowPath not found | |
healthd: BatteryCycleCountPath not found | |
[email protected]: wakealarm_init: timerfd_create failed | |
type=1400 audit(4.787:8): avc: denied { open } for pid=1 comm="init" path="/sys/devices/platform/hi-rfkill.0/rfkill/rfkill0/state" dev="sysfs" ino=13725 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1 | |
[00:00:06:099 ERROR-HI_CIPHER]:HI_DRV_CIPHER_LoadHdcpKey[167]:Invalid head of B1~B3! | |
[00:00:06:099 ERROR-HI_HDMI]:DRV_HDMI_KeyLoad[4193]:Load hdcp key error! | |
audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64 | |
audit: rate limit exceeded | |
type=1400 audit(5.896:9): avc: denied { read } for pid=1888 comm="android.hardwar" name="u:object_r:default_prop:s0" dev="tmpfs" ino=6350 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1 | |
TianlaiInitThread start | |
read descriptors | |
read strings | |
====write bit low,delay 100ms | |
TianlaiInitThread end | |
type=1400 audit(5.896:9): avc: denied { read } for pid=1888 comm="android.hardwar" name="u:object_r:default_prop:s0" dev="tmpfs" ino=6350 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1 | |
console:/ $ audit: audit_lost=13 audit_rate_limit=5 audit_backlog_limit=64 | |
audit: rate limit exceeded | |
====write bit delay | |
type=1400 audit(5.896:10): avc: denied { open } for pid=1888 comm="android.hardwar" path="/dev/__properties__/u:object_r:default_prop:s0" dev="tmpfs" ino=6350 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1 | |
======== Card detection to detect SDIO card! ======== | |
init: Command 'insmod /vendor/lib/modules/hi_sdio_detect.ko' action=vendor.insmod.ko=1 (/vendor/etc/init/hw/init.bigfish.rc:105) took 1372ms and succeeded | |
ehci-platform: EHCI generic platform driver | |
ehci-platform f9890000.ehci: EHCI Host Controller | |
ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1 | |
ehci-platform f9890000.ehci: irq 105, io mem 0xf9890000 | |
ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00 | |
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
usb usb1: Product: EHCI Host Controller | |
usb usb1: Manufacturer: Linux 4.9.118_Linux ehci_hcd | |
usb usb1: SerialNumber: f9890000.ehci | |
hub 1-0:1.0: USB hub found | |
hub 1-0:1.0: 3 ports detected | |
init: Command 'insmod /vendor/lib/modules/ehci-platform.ko' action=vendor.insmod.ko=1 (/vendor/etc/init/hw/init.bigfish.rc:106) took 69ms and succeeded | |
init: Service 'flash_recovery' (pid 1904) exited with status 0 | |
ohci-platform: OHCI generic platform driver | |
ohci-platform f9880000.ohci: Generic Platform OHCI controller | |
ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2 | |
ohci-platform f9880000.ohci: irq 106, io mem 0xf9880000 | |
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 | |
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
usb usb2: Product: Generic Platform OHCI controller | |
usb usb2: Manufacturer: Linux 4.9.118_Linux ohci_hcd | |
usb usb2: SerialNumber: f9880000.ohci | |
hub 2-0:1.0: USB hub found | |
hub 2-0:1.0: 3 ports detected | |
init: Command 'insmod /vendor/lib/modules/ohci-platform.ko' action=vendor.insmod.ko=1 (/vendor/etc/init/hw/init.bigfish.rc:107) took 113ms and succeeded | |
init: Received control message 'start' for 'mdnsd' from pid: 1970 (/system/bin/adbd --root_seclabel=u:r:su:s0) | |
init: starting service 'mdnsd'... | |
init: Created socket '/dev/socket/mdnsd', mode 660, user 1020, group 3003 | |
init: Received control message 'start' for 'sud' from pid: 1968 (start sud) | |
init: starting service 'sud'... | |
tntfs: loading out-of-tree module taints kernel. | |
tntfs: module license 'Commercial. For support email [email protected].' taints kernel. | |
Disabling lock debugging due to kernel taint | |
Tuxera NTFS driver 3018.6.5.3 [Flags: R/W MODULE]. | |
Built against headers 4.9.118_hi3798mv310 #1 SMP PREEMPT Tue Mar 17 14:55:50 HKT 2020 arm | |
Running on kernel 4.9.118_Linux #3 SMP PREEMPT Wed Oct 14 14:17:43 HKT 2020 armv7l | |
init: Command 'insmod /vendor/lib/modules/tntfs_hisilicon.ko' action=vendor.insmod.ko=1 (/vendor/etc/init/hw/init.bigfish.rc:110) took 65ms and succeeded | |
ffs_data_put(): freeing | |
card connected! | |
mmc2: new high speed SDIO card at address 0001 | |
usb 2-1: new full-speed USB device number 2 using ohci-platform | |
usb 2-1: New USB device found, idVendor=1997, idProduct=2433 | |
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 2-1: Product: Mini Keyboard | |
usb 2-1: Manufacturer: | |
input: Mini Keyboard as /devices/platform/soc/f9880000.ohci/usb2/2-1/2-1:1.0/0003:1997:2433.0001/input/input3 | |
keychord: using input dev Mini Keyboard for fevent | |
hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.01 Keyboard [ Mini Keyboard] on usb-f9880000.ohci-1/input0 | |
input: Mini Keyboard as /devices/platform/soc/f9880000.ohci/usb2/2-1/2-1:1.1/0003:1997:2433.0002/input/input4 | |
keychord: using input dev Mini Keyboard for fevent | |
hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.01 Mouse [ Mini Keyboard] on usb-f9880000.ohci-1/input1 | |
type=1400 audit(8.218:44): avc: denied { node_bind } for pid=1879 comm="HwBinder:1879_1" src=32332 scontext=u:r:hal_audio_default:s0 tcontext=u:object_r:node:s0 tclass=tcp_socket permissive=1 | |
audit: audit_lost=30 audit_rate_limit=5 audit_backlog_limit=64 | |
audit: rate limit exceeded | |
type=1400 audit(9.565:55): avc: denied { read write } for pid=2079 comm="BootAnimation" name="jpeg" dev="tmpfs" ino=5837 scontext=u:r:bootanim:s0 tcontext=u:object_r:jpeg_device:s0 tclass=chr_file permissive=1 | |
type=1400 audit(9.565:55): avc: denied { read write } for pid=2079 comm="BootAnimation" name="jpeg" dev="tmpfs" ino=5837 scontext=u:r:bootanim:s0 tcontext=u:object_r:jpeg_device:s0 tclass=chr_file permissive=1 | |
type=1400 audit(9.565:56): avc: denied { open } for pid=2079 comm="BootAnimation" path="/dev/jpeg" dev="tmpfs" ino=5837 scontext=u:r:bootanim:s0 tcontext=u:object_r:jpeg_device:s0 tclass=chr_file permissive=1 | |
type=1400 audit(9.565:56): avc: denied { open } for pid=2079 comm="BootAnimation" path="/dev/jpeg" dev="tmpfs" ino=5837 scontext=u:r:bootanim:s0 tcontext=u:object_r:jpeg_device:s0 tclass=chr_file permissive=1 | |
type=1400 audit(9.565:57): avc: denied { ioctl } for pid=2079 comm="BootAnimation" path="/dev/jpeg" dev="tmpfs" ino=5837 ioctlcmd=0x6a00 scontext=u:r:bootanim:s0 tcontext=u:object_r:jpeg_device:s0 tclass=chr_file permissive=1 | |
type=1400 audit(9.565:57): avc: denied { ioctl } for pid=2079 comm="BootAnimation" path="/dev/jpeg" dev="tmpfs" ino=5837 ioctlcmd=0x6a00 scontext=u:r:bootanim:s0 tcontext=u:object_r:jpeg_device:s0 tclass=chr_file permissive=1 | |
type=1400 audit(9.566:58): avc: denied { read write } for pid=2079 comm="BootAnimation" name="hi_tde" dev="tmpfs" ino=5842 scontext=u:r:bootanim:s0 tcontext=u:object_r:hi_tde_device:s0 tclass=chr_file permissive=1 | |
type=1400 audit(9.566:58): avc: denied { read write } for pid=2079 comm="BootAnimation" name="hi_tde" dev="tmpfs" ino=5842 scontext=u:r:bootanim:s0 tcontext=u:object_r:hi_tde_device:s0 tclass=chr_file permissive=1 | |
type=1400 audit(9.566:59): avc: denied { open } for pid=2079 comm="BootAnimation" path="/dev/hi_tde" dev="tmpfs" ino=5842 scontext=u:r:bootanim:s0 tcontext=u:object_r:hi_tde_device:s0 tclass=chr_file permissive=1 | |
capability: warning: `main' uses 32-bit capabilities (legacy support in use) | |
init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 1795 (/system/bin/hwservicemanager) | |
init: Could not find service hosting interface [email protected]::ISensors/default | |
init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 1795 (/system/bin/hwservicemanager) | |
init: Could not find service hosting interface [email protected]::IVibrator/default | |
init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 1795 (/system/bin/hwservicemanager) | |
init: Could not find service hosting interface [email protected]::IVibrator/default | |
init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 1795 (/system/bin/hwservicemanager) | |
init: Could not find service hosting interface [email protected]::IVibrator/default | |
init: Received control message 'interface_start' for '[email protected]::IConsumerIr/default' from pid: 1795 (/system/bin/hwservicemanager) | |
init: Could not find service hosting interface [email protected]::IConsumerIr/default | |
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
sdcardfs version 2.0 | |
sdcardfs: dev_name -> /data/media | |
sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015,reserved_mb=250 | |
sdcardfs: mnt -> dd264610 | |
sdcardfs: mounted on top of /data/media type ext4 | |
Remount options were mask=23,gid=9997 for vfsmnt dd264910. | |
sdcardfs : options - debug:1 | |
sdcardfs : options - gid:9997 | |
sdcardfs : options - mask:23 | |
Remount options were mask=7,gid=9997 for vfsmnt dd2a4010. | |
sdcardfs : options - debug:1 | |
sdcardfs : options - gid:9997 | |
sdcardfs : options - mask:7 | |
DI: module init start | |
type=1400 audit(9.566:59): avc: denied { open } for pid=2079 comm="BootAnimation" path="/dev/hi_tde" dev="tmpfs" ino=5842 scontext=u:r:bootanim:s0 tcontext=u:object_r:hi_tde_device:s0 tclass=chr_file permissive=1 | |
type=1400 audit(1230739202.292:62): avc: denied { read } for pid=1909 comm="HotpLugThread" scontext=u:r:cameraserver:s0 tcontext=u:r:cameraserver:s0 tclass=netlink_kobject_uevent_socket permissive=1 | |
reg 0x11 value = 0x0000004c | |
DI: hal_com_config_channel_plan chplan:0x20 | |
------------------------------->mac[0] = 202 | |
DI: wl_ndev_init(wlan0) if1 mac_addr=c8:2e:47:23:17:fc | |
DI: wl_ndev_init(p2p0) if2 mac_addr=ca:2e:47:23:17:fc | |
DI: module init ret=0 | |
type=1400 audit(1230739202.292:62): avc: denied { read } for pid=1909 comm="HotpLugThread" scontext=u:r:cameraserver:s0 tcontext=u:r:cameraserver:s0 tclass=netlink_kobject_uevent_socket permissive=1 | |
type=1400 audit(1230739202.888:63): avc: denied { read } for pid=1927 comm="[email protected]" name="u:object_r:system_prop:s0" dev="tmpfs" ino=6407 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1 | |
type=1400 audit(1230739202.888:63): avc: denied { read } for pid=1927 comm="[email protected]" name="u:object_r:system_prop:s0" dev="tmpfs" ino=6407 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1 | |
type=1400 audit(1230739202.888:64): avc: denied { open } for pid=1927 comm="[email protected]" path="/dev/__properties__/u:object_r:system_prop:s0" dev="tmpfs" ino=6407 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1 | |
type=1400 audit(1230739202.888:64): avc: denied { open } for pid=1927 comm="[email protected]" path="/dev/__properties__/u:object_r:system_prop:s0" dev="tmpfs" ino=6407 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1 | |
type=1400 audit(1230739202.888:65): avc: denied { getattr } for pid=1927 comm="[email protected]" path="/dev/__properties__/u:object_r:system_prop:s0" dev="tmpfs" ino=6407 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1 | |
[LCK] phy_LCCalibrate_9086X 3123 | |
type=1400 audit(1230739202.888:65): avc: denied { getattr } for pid=1927 comm="[email protected]" path="/dev/__properties__/u:object_r:system_prop:s0" dev="tmpfs" ino=6407 scontext=u:r:mediacodec:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1 | |
type=1400 audit(1230739203.745:66): avc: denied { call } for pid=1897 comm="HwBinder:1897_1" scontext=u:r:hal_hwsysmanager:s0 tcontext=u:r:hal_hwandroidmediahal:s0 tclass=binder permissive=1 | |
CPU2: update max cpu_capacity 614 | |
IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready | |
audit: audit_lost=32 audit_rate_limit=5 audit_backlog_limit=64 | |
audit: rate limit exceeded | |
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
fastboot# help | |
? - alias for 'help' | |
base - print or set address offset | |
bootm - boot application image from memory | |
bootp - boot image via network using BOOTP/TFTP protocol | |
clear_bootf- clear Hibernate!! bootflag | |
cmp - memory compare | |
cp - memory copy | |
crc32 - checksum calculation | |
ddr - ddr training function | |
fastboot- use USB Fastboot protocol | |
fatinfo - print information about filesystem | |
fatload - load binary file from a dos filesystem | |
fatls - list files in a directory (default /) | |
fdt - flattened device tree utility commands | |
getinfo - print hardware information | |
go - start application at address 'addr' | |
help - print command description/usage | |
hibernate- Hibernate!! boot | |
ir - IR command: | |
loadb - load binary file over serial line (kermit mode) | |
loady - load binary file over serial line (ymodem mode) | |
loop - infinite loop on address range | |
md - memory display | |
mii - MII utility commands | |
mm - memory modify (auto-incrementing address) | |
mmc - MMC sub system | |
mmcinfo - mmcinfo <dev num>-- display MMC info | |
mtest - simple RAM read/write test | |
mw - memory write (fill) | |
nand - NAND sub-system | |
nboot - boot from NAND device | |
nm - memory modify (constant address) | |
otp_burntoecurechipset- Burn to secure chipset, please be careful !!! | |
otp_getcustomerkey- otp_getcustomerkey | |
otp_getstbprivdata- otp_getstbprivdata | |
otp_gettrustzonestat- Get TEE status | |
otp_setstbprivdata- StbPrivData | |
otpreadall- read otp ,for example otpreadall | |
otpwrite- write otp ,for example otpwrite adddress value | |
ping - send ICMP ECHO_REQUEST to network host | |
printenv- print environment variables | |
rarpboot- boot image via network using RARP/TFTP protocol | |
reset - Perform RESET of the CPU | |
saveenv - save environment variables to persistent storage | |
setenv - set environment variables | |
tftp - tftp - download or upload image via network using TFTP protocol | |
unzip - unzip a memory region | |
uploadx - upload binary file over serial line (xmodem mode) | |
usb - USB sub-system | |
usbboot - boot from USB device | |
version - print monitor version |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment