Script for OpenWRT that adds delay, bandwidth limiting and packet loss to a Wi-Fi router connection. See http://kevin-read.com/post/86601925386/simulating-a-slow-network-connection-when-testing-on for details

gistfile1.sh

#!/bin/sh                                                                                                                     

# The bandwidth to simulate, here about 56kilobit per second. This is layer 2 bandwidth, so TCP/UDP and IP overhead will apply                                
BW="56kbps"                                                                                                                                                   
# _Half_ the latency that we aim for. Since this applies to both the WAN port and Wi-Fi, the delay is applied twice, so this actually puts it at around 120+ms
LATENCY="60ms"                                                        
# Chance of packet loss. Also applied to both interfaces, so it is 1%.
LOSS="0.5%"                           
# The device name of your wifi device.
WIFI="wlan0"                      
# The device name of your wan port
WAN="eth0.2"                           

# Delete existing traffic control rules
tc qdisc del root dev $WIFI
tc qdisc del root dev $WAN       

# Create a basic tc rule for wifi                      
tc qdisc add dev $WIFI root handle 1: htb default 12                
# First apply the rate limiting through a HTC scheduler             
tc class add dev $WIFI parent 1:1 classid 1:12 htb rate $BW ceil $BW       
# Then apply the netem scheduler which handles delay and packet loss       
tc qdisc add dev $WIFI parent 1:12 netem delay $LATENCY 10ms 25% loss $LOSS

# The same for WAN                                                 
tc qdisc add dev $WAN root handle 2: htb default 12                       
tc class add dev $WAN parent 2:1 classid 2:12 htb rate $BW ceil $BW       
tc qdisc add dev $WAN parent 2:12 netem delay $LATENCY 10ms 25% loss $LOSS