karolba

A way to install Alpine Linux on a Scaleway Stardust instance without the use of a rescue image, but by booting into the install image over the network using https://netboot.xyz.

1. Connect to the serial console, using scw instance server console {uuid} zone={zone}

2. Reboot the VM into UEFI settings

   • either by executing systemctl reboot --firmware on the machine
   • or by using scw instance server reboot {uuid} zone={zone} locally and repeatedly mashing the escape key on the serial console

3. Go to Device Manager -> Network Device List -> the only network device -> HTTP Boot Configuration -> Boot URI

unixfox

Use this better tutorial: https://gist.github.com/karolba/a3f1c5f8d50c67f5a19e6c8f38e53e12

---

1. Reboot into the rescue image
2. Then execute these commands:

cd /dev/shm
mkdir alpine
cd alpine

imba-tjd

云

• IaaS指提供系统（可以自己选）或者储存空间之类的硬件，软件要自己手动装。PaaS提供语言环境和框架（可以自己选）。SaaS只能使用开发好的软件（卖软件本身，如税务会计、表格文字）。BaaS一般类似于非关系数据库，但各家不通用
• 云服务的特点：零前期成本&按需付费&弹性（类似于租，可随时多加、退掉；但没有残值）、高可用（放在机房中，不同AZ间水电隔离）

其他人的集合

• https://education.github.com/pack GitHub学生包，需用教育邮箱验证。各种福利，可从DigitalOcean上手
• https://github.com/ripienaar/free-for-dev 本文尽量不与此项目重复
• https://free.zhelper.net/