GStreamer Pipeline Samples #GStreamer

gstreamer_pipeline_samples.md

Gstreamer Pipeline Samples

Table of Contents:

• Gstreamer Pipeline Samples
  • Tips for Debug
  • Video
    • display test video
    • record to file
    • record and display at the same time(queue)
    • record webcam to *.mp4(jetson nano)
    • fps test
  • Audio
  • Mux Video and Audio
  • Media File
    • Play Media File
    • Transcode Media File
  • Network streaming
    • Video RTP Streaming
      • send a test video with h264 rtp stream
      • send a screen capture with h264 rtp stream(linux)
      • send a screen capture with h264 rtp stream(osx)
      • send a *.mp4 file with h264 rtp stream
      • send a webcam with h264 rtp stream(jetson nano)
      • send a webcam with h264 rtp stream while record (jetson nano)
      • receive h264 rtp stream(desktop host)
    • Audio RTP Streaming
      • raw audio
      • encoded/decoded audio
    • Audio + Video RTP Streaming
    • Media File RTP Streaming
      • demux and split video and audio(not best)
      • remux to MPEGST(best)
        • mpegts sender
        • mpegts receiver
    • RTSP Server
      • install server(jetson nano)
      • stream web-cam(jetson nano)
      • stream media file(*.mp4)
  • Mixing
    • Mixing videos
    • Mixing video+audio
  • SHM(Shared Memory)
    • raw video
    • h264 encode/decode
  • python-opencv

Get great help from below references:

• Stream H.264 video over rtp using gstreamer

• Implementing GStreamer Webcam(USB & Internal) Streaming[Mac & C++ & CLion]

• GStreamer command-line cheat sheet

• Example GStreamer Pipelines

• Gstreamer real life examples

Tips for Debug

• Set general debug level

  export GST_DEBUG=6 #5
  export GST_DEBUG=GST_REGISTRY:6,GST_PLUGIN:6

• Discover video file

  gst-discoverer-1.0 -v fat_bunny.ogg 

• Inspect plugin

  gst-inspect-1.0 avdec_h264

Video

display test video

gst-launch-1.0 -vvv videotestsrc ! autovideosink
gst-launch-1.0 -vvv videotestsrc ! 'video/x-raw,width=1280,height=720,format=RGB,framerate=60/1' ! fpsdisplaysink
gst-launch-1.0 -vvv videotestsrc ! videoconvert ! fpsdisplaysink text-overlay=false

record to file

gst-launch-1.0 -vv videotestsrc ! x264enc ! flvmux ! filesink location=xyz.flv

gst-launch-1.0 -vv videotestsrc ! x264enc ! qtmux ! filesink location=xyz.mp4 -e

record and display at the same time(queue)

GStreamer Recording and Viewing Stream Simultaneously

gst-launch-1.0 -vvv videotestsrc \
! tee name=t \
t. ! queue ! x264enc ! mp4mux ! filesink location=xyz.mp4 -e \
t. ! queue leaky=1 ! autovideosink sync=false

tips:

1. -e (EOS signal): Pipelines for file saving require a reliable EOS(End of Stream) signal
2. queue leaky=1 ! autovideosink sync=false: prevent blocking
3. drop=true: drop frame if cannot read quickly enough

record webcam to *.mp4(jetson nano)

gst-launch-1.0 nvarguscamerasrc ! fakesink

gst-launch-1.0 nvarguscamerasrc num-buffers=2000 ! 'video/x-raw(memory:NVMM),width=1920, height=1080, framerate=30/1, format=NV12' ! omxh264enc ! qtmux ! filesink location=test.mp4 -e

gst-launch-1.0 nvarguscamerasrc num-buffers=2000 ! 'video/x-raw(memory:NVMM),width=1920, height=1080, framerate=30/1, format=NV12' ! nvvidconv ! x264enc ! qtmux ! filesink location=test.mp4 -e

fps test

gst-launch-1.0 -v videotestsrc ! videorate ! video/x-raw,framerate=30/1 ! videoconvert ! autovideosink

gst-launch-1.0 -v videotestsrc ! videorate ! video/x-raw,framerate=30/1 ! x264enc tune=zerolatency bitrate=16000000 speed-preset=superfast ! rtph264pay ! udpsink port=5000 host=$HOST

gst-launch-1.0 -v videotestsrc ! videorate ! video/x-raw,framerate=60/1 ! x264enc tune=zerolatency bitrate=16000000 speed-preset=superfast ! h264parse ! rtph264pay ! udpsink port=5000 host=$HOST

gst-launch-1.0 -v videotestsrc ! video/x-raw,framerate=30/1 ! videorate ! video/x-raw,framerate=60/1 ! x264enc tune=zerolatency bitrate=16000000 speed-preset=superfast ! rtph264pay ! udpsink port=5000 host=$HOST

Audio

gst-launch-1.0 audiotestsrc ! autoaudiosink

# This creates a higher beep:
gst-launch-1.0 audiotestsrc freq=1000 ! autoaudiosink

# volume
gst-launch-1.0 audiotestsrc volume=0.1 ! autoaudiosink

# White noise
gst-launch-1.0 audiotestsrc wave="white-noise" ! autoaudiosink

# Silence
gst-launch-1.0 audiotestsrc wave="silence" ! autoaudiosink

Mux Video and Audio

gst-launch-1.0 -v audiotestsrc ! autoaudiosink videotestsrc ! autovideosink

# save to `*.mp4` file
gst-launch-1.0 -v -e videotestsrc \
  ! x264enc \
  ! mp4mux name=mux \
  ! filesink location="bla.mp4" audiotestsrc \
  ! lamemp3enc \
  ! mux.

videotestsrc --> x264enc -----
>---> mp4mux ---> filesink audiotestsrc --> lamemp3enc --/

Media File

# information of file
gst-discoverer-1.0 -v /home/jetson/Videos/why_I_left_China_for_Good.mp4

Play Media File

# play `mp4` file with audio
gst-launch-1.0 filesrc location=/Users/siyao/Movies/why_I_left_China_for_Good.mp4 \
  ! qtdemux name=demux  demux.audio_0 \
  ! decodebin ! audioconvert ! audioresample ! autoaudiosink

# play `mp4` file with video
gst-launch-1.0 filesrc location=/Users/siyao/Movies/why_I_left_China_for_Good.mp4 \
  ! qtdemux \
  ! decodebin ! videoconvert ! videoscale ! autovideosink

# play `mkv` file with video
gst-launch-1.0 -v filesrc location=/Users/siyao/Movies/jellyfish-10-mbps-hd-h264.mkv \
  ! matroskademux name=demux  demux.video_0\
  ! decodebin \
  ! videoconvert \
  ! autovideosink

# play `mp4` file with both audio and video
gst-launch-1.0 filesrc location=/Users/siyao/Movies/why_I_left_China_for_Good.mp4 \
  ! qtdemux name=demux  demux.audio_0 \
  ! queue ! decodebin ! audioconvert ! audioresample ! autoaudiosink  demux.video_0 \
  ! queue ! decodebin ! videoconvert ! videoscale ! autovideosink

Transcode Media File

# `mkv` to `mp4` with video
gst-launch-1.0 -v filesrc location=/home/jetson/Videos/jellyfish-10-mbps-hd-h264.mkv \
  ! matroskademux \
  ! h264parse \
  ! mp4mux \
  ! filesink location=jellyfish.mp4

# `mp4` to `mkv` with video
gst-launch-1.0 -v filesrc location=/Users/siyao/Movies/why_I_left_China_for_Good.mp4 \
  ! qtdemux name=demux matroskamux name=mux \
  ! filesink location=fat_bunny.mkv  demux.video_0 \
  ! queue ! h264parse ! mux.

# `mp4` to `mkv` with audio
gst-launch-1.0 -v filesrc location=/Users/siyao/Movies/why_I_left_China_for_Good.mp4 \
  ! qtdemux name=demux matroskamux name=mux \
  ! filesink location=fat_bunny.mka  demux.audio_0 \
  ! queue ! decodebin ! audioconvert ! vorbisenc ! mux.

# `mp4`to `mkv` with both audio and video
gst-launch-1.0 -v filesrc location=/Users/siyao/Movies/why_I_left_China_for_Good.mp4 \
  ! qtdemux name=demux matroskamux name=mux \
  ! filesink location=fat_bunny.mkv  demux.audio_0 \
  ! queue ! decodebin ! audioconvert ! audioresample ! vorbisenc ! mux.  demux.video_0 \
  ! queue ! h264parse ! mux.

Network streaming

HOST=192.168.31.175 [//]: # (destination receiving the stream)

Video RTP Streaming

• sender

send a test video with h264 rtp stream

gst-launch-1.0 -v videotestsrc ! x264enc tune=zerolatency bitrate=500 speed-preset=superfast ! rtph264pay ! udpsink port=5000 host=$HOST

gst-launch-1.0 -v videotestsrc pattern=snow ! "video/x-raw,format=I420,width=1920,height=1080,framerate=60/1" ! x264enc tune=zerolatency bitrate=500 speed-preset=superfast ! rtph264pay ! udpsink port=5000 host=$HOST

# grayscale
gst-launch-1.0 -v videotestsrc ! videobalance saturation=0 ! x264enc ! video/x-h264, stream-format=byte-stream ! rtph264pay ! udpsink host=$HOST port=5000

# control fps
gst-launch-1.0 -v videotestsrc ! videorate ! "video/x-raw,framerate=60/1" ! x264enc tune=zerolatency bitrate=16000000 speed-preset=superfast ! h264parse ! rtph264pay pt=96 ! udpsink port=5000 host=$HOST

gst-launch-1.0 -v videotestsrc ! videorate ! "video/x-raw,framerate=60/1" ! omxh264enc insert-sps-pps=true bitrate=16000000 ! h264parse ! rtph264pay pt=96 ! udpsink port=5000 host=$HOST

gst-launch-1.0 -v videotestsrc ! videorate ! "video/x-raw,width=1280,height=720,framerate=60/1" ! omxh264enc insert-sps-pps=true bitrate=16000000 ! h264parse ! rtph264pay pt=96 ! udpsink port=5000 host=$HOST

send a screen capture with h264 rtp stream(linux)

gst-launch-1.0 -v ximagesrc ! video/x-raw,framerate=20/1 ! videoscale ! videoconvert ! x264enc tune=zerolatency bitrate=500 speed-preset=superfast ! rtph264pay ! udpsink host=127.0.0.1 port=5000

send a screen capture with h264 rtp stream(osx)

gst-launch-1.0 -v avfvideosrc capture-screen=true ! video/x-raw,framerate=20/1 ! videoscale ! videoconvert ! x264enc tune=zerolatency bitrate=500 speed-preset=superfast ! rtph264pay ! udpsink host=127.0.0.1 port=5000

send a *.mp4 file with h264 rtp stream

gst-launch-1.0 -v filesrc location=test.mp4 ! qtdemux ! h264parse ! omxh264dec ! x264enc ! rtph264pay ! udpsink host=$HOST port=5000

gst-launch-1.0 -v filesrc location=test.mp4 ! qtdemux ! h264parse ! omxh264dec ! omxh264enc insert-sps-pps=true ! rtph264pay ! udpsink host=$HOST port=5000

gst-launch-1.0 -v filesrc location=test.mp4 ! qtdemux ! h264parse ! rtph264pay ! udpsink host=$HOST port=5000

send a webcam with h264 rtp stream(jetson nano)

!!slow
gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM),width=1280, height=720, framerate=60/1, format=NV12' ! nvvidconv ! x264enc bitrate=16000000 speed-preset=superfast ! rtph264pay ! udpsink port=5000 host=$HOST

!!fast
gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM),width=1920, height=1080, framerate=30/1, format=NV12' ! nvvidconv flip-method=2 ! nvv4l2h264enc insert-sps-pps=true bitrate=16000000 ! rtph264pay ! udpsink port=5000 host=$HOST

gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM),width=1920, height=1080, framerate=30/1, format=NV12' ! omxh264enc insert-sps-pps=true bitrate=16000000 ! rtph264pay ! udpsink port=5000 host=$HOST

# avoid receiver using sync=false

send a webcam with h264 rtp stream while record (jetson nano)

gst-launch-1.0 nvarguscamerasrc sensor-id=0 ! 'video/x-raw(memory:NVMM),width=1920, height=1080, framerate=30/1, format=NV12' ! nvvidconv flip-method=2 ! omxh264enc insert-sps-pps=true bitrate=16000000 \
    ! tee name=t \
    t. ! queue ! rtph264pay ! udpsink port=5000 host=$OSX_HOST \
    t. ! queue ! qtmux ! filesink location=test.mp4 -e

• receiver

receive h264 rtp stream(desktop host)

# display
gst-launch-1.0 -v udpsrc port=5000 ! "application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, payload=(int)96" ! rtph264depay ! h264parse ! decodebin ! videoconvert ! autovideosink sync=false

gst-launch-1.0 -v udpsrc port=5000 ! "application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, payload=(int)96" ! rtph264depay ! h264parse ! avdec_h264 ! videoconvert ! autovideosink

# fps
gst-launch-1.0 -v udpsrc port=5000 ! "application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, payload=(int)96" ! rtph264depay ! h264parse ! decodebin ! videoconvert ! fpsdisplaysink text-overlay=false sync=false

# record and display
gst-launch-1.0 -v udpsrc port=5000 ! "application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, payload=(int)96" \
! rtph264depay ! h264parse \
! tee name=t \
t. ! queue ! mp4mux ! filesink location=xyz.mp4 -e \
t. ! queue leaky=1 ! decodebin ! videoconvert ! autovideosink sync=false

tips:

1. sync=false: remove dropped frame rate, lag and error message(There may be a timestamping problem, or this computer is too slow). see the Streaming RTP/RTSP: sync/timestamp problems for details.
2. udpsrc port=5000 cap='application/x-rtp': will set the remaining properties to default.

Audio RTP Streaming

raw audio

# sender
gst-launch-1.0 audiotestsrc \
  ! audioconvert \
  ! audioresample \
  ! rtpL24pay \
  ! udpsink host=$HOST port=5001

# receiver
gst-launch-1.0 -v udpsrc port=5001 \
  ! 'application/x-rtp,media=audio,payload=96,clock-rate=44100,encoding-name=L24' \
  ! rtpL24depay \
  ! audioconvert \
  ! autoaudiosink sync=false

encoded/decoded audio

# sender
gst-launch-1.0 audiotestsrc \
  ! audioconvert \
  ! audioresample \
  ! alawenc \
  ! rtppcmapay \
  ! udpsink host=$HOST port=5001

# receiver
gst-launch-1.0 -v udpsrc port=5001 \
  ! 'application/x-rtp,media=audio,payload=8,clock-rate=8000,encoding-name=PCMA'  \
  ! rtppcmadepay \
  ! alawdec \
  ! audioconvert \
  ! autoaudiosink sync=false

Audio + Video RTP Streaming

# sender
gst-launch-1.0 -v videotestsrc \
  ! 'video/x-raw,format=I420,width=1920,height=1080,framerate=60/1' \
  ! omxh264enc insert-sps-pps=true bitrate=16000000 \
  ! h264parse \
  ! rtph264pay pt=96 \
  ! udpsink port=5000 host=$HOST audiotestsrc \
  ! audioconvert \
  ! audioresample \
  ! rtpL24pay \
  ! udpsink host=$HOST port=5001


# receiver
gst-launch-1.0 -v udpsrc port=5000 \
  ! 'application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, payload=(int)96' \
  ! rtph264depay \
  ! h264parse \
  ! decodebin \
  ! videoconvert \
  ! fpsdisplaysink text-overlay=false sync=false \
  udpsrc port=5001 \
  ! "application/x-rtp,channels=1,media=audio,payload=96,clock-rate=44100,encoding-name=L24" \
  ! rtpL24depay \
  ! audioconvert \
  ! autoaudiosink sync=false

#TODO: SDP file
v=0
c=IN IP4 <Receiver IP>
m=video 5000 RTP/AVP 96
a=recvonly
a=rtpmap:96 H264/90000
m=audio 5001 RTP/AVP 8
a=recvonly
a=rtpmap:8 PCMA/8000/1

Media File RTP Streaming

demux and split video and audio(not best)

# sender `mp4` file
gst-launch-1.0 -v filesrc location=/home/jetson/Videos/why_I_left_China_for_Good.mp4 \
  ! qtdemux name=demux  \
  demux.video_0 ! queue ! h264parse ! decodebin ! omxh264enc insert-sps-pps=true bitrate=16000000 ! rtph264pay pt=96 ! udpsink host=$HOST port=5000  \
  demux.audio_0 ! queue ! decodebin ! audioconvert ! audioresample ! avenc_ac3 ! rtpac3pay ! udpsink host=$HOST port=5001

# receiver
gst-launch-1.0 -v \
  udpsrc port=5000 \
  ! 'application/x-rtp,media=(string)video,clock-rate=(int)90000,encoding-name=(string)H264,payload=(int)96' \
  ! rtph264depay ! h264parse ! decodebin ! videoconvert ! fpsdisplaysink text-overlay=false sync=false  \
  udpsrc port=5001 \
  ! 'application/x-rtp,media=(string)audio,clock-rate=(int)44100,encoding-name=(string)AC3,payload=(int)96' \
  ! rtpac3depay ! ac3parse ! decodebin ! audioconvert ! autoaudiosink sync=false

# receiver(short version)
gst-launch-1.0 -v \
  udpsrc port=5000 caps='application/x-rtp' \
  ! rtph264depay ! decodebin ! videoconvert ! fpsdisplaysink text-overlay=false sync=false  \
  udpsrc port=5001 caps='application/x-rtp' \
  ! rtpac3depay ! decodebin ! audioconvert ! autoaudiosink sync=false

remux to MPEGST(best)

It has several advantages like good re-synchronization after packet loss and that A/V always stays sync

mpegts sender

# sender `mp4` file
gst-launch-1.0 -v filesrc location=/home/jetson/Videos/why_I_left_China_for_Good.mp4 \
  ! qtdemux name=demux mpegtsmux name=mux alignment=7 \
  ! rtpmp2tpay \
  ! udpsink host=$HOST port=5000 demux. \
  ! queue ! h264parse ! decodebin ! omxh264enc insert-sps-pps=true bitrate=16000000 ! mux. demux. \
  ! queue ! aacparse ! mux.

mpegts receiver

# receiver
gst-launch-1.0 -v udpsrc port=5000 \
  ! 'application/x-rtp,clock-rate=(int)90000,media=(string)video,payload=(int)96,encoding-name=(string)MP2T' \
  ! rtpmp2tdepay ! tsparse ! tsdemux name=demux \
  demux. ! queue ! decodebin ! videoconvert ! fpsdisplaysink text-overlay=false sync=false \
  demux. ! queue ! decodebin ! audioconvert ! autoaudiosink sync=false

# receiver(short version)
gst-launch-1.0 -v udpsrc port=5000 caps="application/x-rtp" \
  ! rtpmp2tdepay ! tsparse ! tsdemux name=demux \
  demux. ! queue ! decodebin ! videoconvert ! fpsdisplaysink text-overlay=false sync=false \
  demux. ! queue ! decodebin ! audioconvert ! autoaudiosink sync=false

# receiver(`ts` file)
gst-launch-1.0 -v -e udpsrc port=5000 caps="application/x-rtp" \
  ! rtpmp2tdepay ! tsparse ! filesink location=foo.ts

tsdemux demux.video_0 not work, see the details belowing: You're using a name (video_0) that doesn't exist. The pad names of demuxers vary from demuxer to demuxer, and might sometimes also differ from version to version. In this case that first video pad is called video_0031 as you can see at the end. It's generally best not to specify pad names unless you have a good reason to do so.

RTSP Server

install server(jetson nano)

# install gst-rtsp-server libs
sudo apt-get install libgstrtspserver-1.0 libgstreamer1.0-dev

# install gst-rtsp-server test server(1.14 is your gst version, checked by gst-lanch-1.0 --version)
wget https://raw.githubusercontent.com/GStreamer/gst-rtsp-server/1.14/examples/test-launch.c
gcc test-launch.c -o test-launch $(pkg-config --cflags --libs gstreamer-1.0 gstreamer-rtsp-server-1.0)

stream web-cam(jetson nano)

# server
./test-launch "nvarguscamerasrc ! video/x-raw(memory:NVMM), format=NV12, width=1920, height=1080, framerate=30/1 ! nvvidconv ! video/x-raw, width=640, height=480, format=NV12, framerate=30/1 ! omxh265enc ! rtph265pay name=pay0 pt=96 config-interval=1"

# client
gst-launch-1.0 rtspsrc location=rtsp://jetson-desktop.local:8554/test  ! decodebin ! videoconvert ! autovideosink

stream media file(*.mp4)

1. video

   # server
   ./test-launch "filesrc location=/home/jetson/Videos/why_I_left_China_for_Good.mp4 \
     ! qtdemux \
     ! h264parse \
     ! decodebin \
     ! videoconvert \
     ! omxh264enc insert-sps-pps=true bitrate=16000000 \
     ! rtph264pay name=pay0"
   
   # client
   gst-launch-1.0 -v rtspsrc location=rtsp://jetson-desktop.local:8554/test \
     ! rtph264depay \
     ! h264parse \
     ! decodebin \
     ! videoconvert \
     ! autovideosink sync=false

2. audio

   # server
   ./test-launch "filesrc location=/home/jetson/Videos/why_I_left_China_for_Good.mp4 \
     ! qtdemux \
     ! aacparse \
     ! decodebin \
     ! audioconvert \
     ! avenc_aac \
     ! rtpmp4apay name=pay0"
   
   # client
   gst-launch-1.0 -v rtspsrc location=rtsp://jetson-desktop.local:8554/test \
     ! rtpmp4adepay \
     ! aacparse \
     ! decodebin \
     ! audioconvert \
     ! autoaudiosink sync=false

3. video + audio

   h264 + acc,

   # server
   ./test-launch "filesrc location=/home/jetson/Videos/why_I_left_China_for_Good.mp4 \
     ! qtdemux name=demux \
     demux. ! queue ! h264parse ! decodebin ! omxh264enc insert-sps-pps=true bitrate=16000000 ! rtph264pay name=pay0 \
     demux. ! queue ! aacparse ! decodebin ! audioconvert ! avenc_aac ! rtpmp4apay name=pay1"
   
   # client
   gst-launch-1.0 -v rtspsrc location=rtsp://jetson-desktop.local:8554/test name=src \
     src. ! rtph264depay ! h264parse ! decodebin ! videoconvert ! autovideosink sync=false \
     src. ! rtpmp4adepay ! aacparse ! decodebin ! audioconvert ! autoaudiosink sync=false
   
   # client(short)
   gst-launch-1.0 -v rtspsrc location=rtsp://jetson-desktop.local:8554/test name=src \
     src. ! decodebin ! videoconvert ! autovideosink sync=false \
     src. ! decodebin ! audioconvert ! autoaudiosink sync=false

   mpegts,

   # server
   ./test-launch "filesrc location=/home/jetson/Videos/why_I_left_China_for_Good.mp4 \
     ! qtdemux name=demux mpegtsmux name=mux alignment=7 \
     ! rtpmp2tpay name=pay0 demux. \
     ! queue ! h264parse ! decodebin ! omxh264enc insert-sps-pps=true bitrate=16000000 ! mux. demux. \
     ! queue ! aacparse ! decodebin ! audioconvert ! avenc_aac ! mux."
   
   # client
   gst-launch-1.0 -v rtspsrc location=rtsp://jetson-desktop.local:8554/test \
     ! rtpmp2tdepay ! tsparse ! tsdemux name=demux \
     demux. ! queue ! decodebin ! videoconvert ! fpsdisplaysink text-overlay=false sync=false \
     demux. ! queue leaky=1 ! decodebin ! audioconvert ! autoaudiosink sync=false
   
   # client(only video)
   gst-launch-1.0 -v rtspsrc location=rtsp://jetson-desktop.local:8554/test name=src \
     src. ! rtpmp2tdepay ! tsparse ! tsdemux name=demux ! h264parse ! avdec_h264 ! videoconvert ! autovideosink sync=false
   
   # client(only audio)
   gst-launch-1.0 -v rtspsrc location=rtsp://jetson-desktop.local:8554/test \
     ! rtpmp2tdepay ! tsparse ! tsdemux name=demux ! aacparse ! decodebin ! audioconvert ! autoaudiosink sync=false

Mixing

Mixing videos

# display
gst-launch-1.0 -e compositor name=comp sink_0::alpha=0.7 sink_1::alpha=0.5 \
    ! autovideosink \
    videotestsrc \
        ! video/x-raw, framerate=10/1, width=640, height=360 \
        ! comp.sink_0 \
    videotestsrc pattern="snow" \
        ! video/x-raw, framerate=10/1, width=200, height=150 \
        ! comp.sink_1

video + rtp/udp,

# sender
gst-launch-1.0 -e compositor name=comp sink_0::alpha=0.7 sink_1::alpha=0.5 \
    ! videoconvert ! omxh264enc insert-sps-pps=true bitrate=16000000 ! h264parse ! rtph264pay ! udpsink port=5000 host=$HOST \
    videotestsrc \
        ! video/x-raw, framerate=10/1, width=640, height=360 \
        ! comp.sink_0 \
    videotestsrc pattern="snow" \
        ! video/x-raw, framerate=10/1, width=200, height=150 \
        ! comp.sink_1

receiver

Mixing video+audio

sender(mpegts + rtp/udp),

# sender(videotestsrc/audiotestsrc)
gst-launch-1.0 -v \
    mpegtsmux name=mux alignment=7 ! rtpmp2tpay \
    ! udpsink port=5000 host=$HOST sync=false \
    compositor name=videomix ! x264enc ! queue ! mux. \
    audiomixer name=audiomix ! audioconvert ! audioresample ! avenc_ac3 ! queue ! mux. \
    videotestsrc pattern=ball ! videomix. \
    videotestsrc pattern=pinwheel ! videoscale ! video/x-raw,width=100 ! videomix. \
    audiotestsrc freq=400 ! audiomix. \
    audiotestsrc freq=600 ! audiomix.

# sender(mp4 file)
SRC=/home/jetson/Videos/why_I_left_China_for_Good.mp4
gst-launch-1.0 -v \
    mpegtsmux name=mux alignment=7 ! rtpmp2tpay \
    ! udpsink port=5000 host=$HOST sync=false \
    compositor name=videomix ! omxh264enc bitrate=16000000 ! queue2 ! mux. \
    audiomixer name=audiomix ! audioconvert ! audioresample ! avenc_ac3 ! queue2 ! mux. \
    filesrc location=$SRC ! qtdemux name=demux \
    demux.video_0 ! queue2 ! h264parse ! omxh264dec ! videoconvert ! videomix. \
    demux.audio_0 ! queue2 ! decodebin ! audioconvert ! audioresample ! audiomix. \
    videotestsrc pattern=ball ! videoscale ! video/x-raw,width=100,height=100 ! videomix. \
    audiotestsrc freq=600 volume=0.1 ! audiomix.

# sender(mp4 file) `uridecodebin`
gst-launch-1.0 \
    mpegtsmux name=mux ! rtpmp2tpay \
    ! udpsink port=5000 host=$HOST sync=false \
    compositor name=videomix ! x264enc ! queue2 ! mux. \
    audiomixer name=audiomix ! audioconvert ! audioresample ! avenc_ac3 ! queue2 ! mux. \
    uridecodebin uri=file://$SRC name=dec \
    dec. ! queue2 ! audioconvert ! audioresample ! audiomix. \
    dec. ! queue2 ! nvvidconv ! videoconvert ! video/x-raw,width=640,height=360 ! videomix. \
    videotestsrc pattern=ball ! video/x-raw,width=100,height=100 ! videomix. \
    audiotestsrc freq=400 volume=0.2 ! audiomix.

tcp server,

# View this in VLC with tcp://localhost:7001
gst-launch-1.0 \
    mpegtsmux name=mux ! rtpmp2tpay ! \
    tcpserversink port=7001 host=0.0.0.0 recover-policy=keyframe sync-method=latest-keyframe sync=false \
    compositor name=videomix ! x264enc ! queue2 ! mux. \
    audiomixer name=audiomix ! audioconvert ! audioresample ! avenc_ac3 ! queue2 ! mux. \
    uridecodebin uri=file://$SRC name=demux ! \
    queue2 ! audioconvert ! audioresample ! audiomix. \
    demux. ! queue2 ! decodebin ! nvvidconv ! videoconvert ! videoscale ! video/x-raw,width=640,height=360 ! videomix. \
    videotestsrc pattern=ball ! videoscale ! video/x-raw,width=100,height=100 ! videomix. \
    audiotestsrc freq=400 volume=0.2 ! audiomix.

tips for jetson nano, use nvvidconv instead of videoconvert because decodebin use nvv4l2decoder to decode H.264 in default. Otherwise, explictly decode H.264 with omxh264dec.

receiver,

# receiver
[mpegts receiver](#mpegts-receiver)
gst-launch-1.0 -v udpsrc port=5000 caps="application/x-rtp" \
  ! rtpmp2tdepay ! tsparse ! tsdemux name=demux \
  demux. ! queue ! decodebin ! videoconvert ! fpsdisplaysink text-overlay=false sync=false \
  demux. ! queue leaky=1 ! decodebin ! audioconvert ! autoaudiosink sync=false

SHM(Shared Memory)

raw video

# send
gst-launch-1.0 -v videotestsrc is-live=true ! 'video/x-raw,width=1280,height=720,format=(string)RGB,framerate=(fraction)60/1' ! videoconvert ! shmsink socket-path=/tmp/foo name=/tmp/shm sync=false wait-for-connection=false shm-size=20000000

# receive
gst-launch-1.0 -v shmsrc do-timestamp=true socket-path=/tmp/foo name=/tmp/shm ! 'video/x-raw,width=1280,height=720,format=(string)RGB,framerate=(fraction)60/1' ! videoconvert ! fpsdisplaysink text-overlay=false sync=false -e

tips:

1. do-timestamp=true: solve gst_segment_to_stream_time: assertion 'segment->format == format' failed error. Seeing atGetting shmsink/shmsrc to work with videomixer
2. In local host, use raw video faster than h264 due to memory cheaper/faster that cpu
3. increase shm-size for large image

h264 encode/decode

# send
gst-launch-1.0 -v videotestsrc ! x264enc ! shmsink socket-path=/tmp/foo sync=false wait-for-connection=false shm-size=10000000

gst-launch-1.0 -v videotestsrc ! 'video/x-raw,width=1280,height=720,format=NV12,framerate=60/1' ! x264enc ! shmsink socket-path=/tmp/foo sync=false wait-for-connection=false shm-size=10000000

# receive
gst-launch-1.0 -v shmsrc socket-path=/tmp/foo ! h264parse ! decodebin ! videoconvert ! fpsdisplaysink text-overlay=false sync=false

python-opencv

import cv2
import time
# capture

# videotestsrc
gst_str = 'videotestsrc ! video/x-raw,framerate=20/1 ! videoscale ! videoconvert ! appsink'

# udpsrc
gst_str = 'udpsrc port=5000 ! "application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, payload=(int)96" ! rtph264depay ! h264parse ! decodebin ! videoconvert ! autovideosink'

gst_str = 'udpsrc port=5000 caps = "application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, payload=(int)96" ! rtph264depay ! decodebin ! videoconvert ! appsink'

cap = cv2.VideoCapture(gst_str, cv2.CAP_GSTREAMER)

cap.isOpened()
ret, frame = cap.read()
cv2.imwrite("result.jpg", frame)
cap.release()

# write

# udpsink
gst_str = 'appsrc ! videoconvert ! x264enc tune=zerolatency bitrate=500 speed-preset=superfast ! rtph264pay ! udpsink host=127.0.0.1 port=5000'

fps = 30
frame_width = 640
frame_height = 480
out = cv2.VideoWriter(gst_str, cv2.CAP_GSTREAMER, 0, fps, (frame_width, frame_height), True)
out.isOpened()

img = cv2.imread('WechatIMG1.jpeg')
img.shape
img = cv2.resize(img, (frame_width, frame_height))
img.shape
cv2.imwrite("result.jpg", img)
while True:
    out.write(img)
    time.sleep(1/60)

out.release()

convert gstreamer pipeline to opencv in python
python-opencv-gstreamer-examples

Thank you.

Thank you!

This is awesome. I'm seeking a sample pipeline to read RTSP streams from a URL, convert them to HLS streams, and send them to an HLS server running on my machine or anywhere else. I can't seem to figure out the use of HLS with Gstreamer.

Hi ! I think webrtc can help here or some encoder is needed can HW or SW Regards, Mujahid Ali

…

On Wed, Nov 15, 2023 at 9:43 PM Timmy Omolana ***@***.***> wrote: ***@***.**** commented on this gist. ------------------------------ This is awesome. I'm seeking a sample pipeline to read RTSP streams from a URL, convert them to HLS streams, and send them to an HLS server running on my machine or anywhere else. I can't seem to figure out the use of HLS with Gstreamer. — Reply to this email directly, view it on GitHub <https://gist.github.com/liviaerxin/bb34725037fd04afa76ef9252c2ee875#gistcomment-4761615> or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJINZEGTQTMGXSMSE26ODTYETWLNBFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFQKSXMYLMOVS2I5DSOVS2I3TBNVS3W5DIOJSWCZC7OBQXE5DJMNUXAYLOORPWCY3UNF3GS5DZVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFVEYTANBSGM3DQNRSU52HE2LHM5SXFJTDOJSWC5DF> . You are receiving this email because you are subscribed to this thread. Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub> .

Hm, thank you so much. I'll have a look at WebRTC and various encoder that could be helpful here. Also, can you please tell me what HW and SW mean?

HW=Hardware (accelerated via specialized hardware) or SW=Software (cpu-only)

exactly Regards, Mujahid Ali

…

On Thu, Nov 16, 2023 at 8:16 AM clort81 ***@***.***> wrote: ***@***.**** commented on this gist. ------------------------------ HW=Hardware (accelerated via specialized hardware) or SW=Software (cpu-only) — Reply to this email directly, view it on GitHub <https://gist.github.com/liviaerxin/bb34725037fd04afa76ef9252c2ee875#gistcomment-4762089> or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJINZBNABYHGIEZHBXXICLYEWAQFBFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFQKSXMYLMOVS2I5DSOVS2I3TBNVS3W5DIOJSWCZC7OBQXE5DJMNUXAYLOORPWCY3UNF3GS5DZVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFVEYTANBSGM3DQNRSU52HE2LHM5SXFJTDOJSWC5DF> . You are receiving this email because you commented on the thread. Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub> .

HW=Hardware (accelerated via specialized hardware) or SW=Software (cpu-only)

Oh, I didn't think of that. Thank you very much!